Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers

Alexander Passer, Maria Balouktsi, Thomas Lützkendorf, Angelika Hinterbrandner, Helmuth Kreiner

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

The growing awareness for sustainable construction increases the demand for low environmental impact products among others. This poses new challenges to construction product manufacturers (CPM) not only in terms of developing such products, but also in terms of providing detailed and reliable product information to designers and procurers, as well as manufacturers of more complex products, including information on the use of resources and resulting effects on the global environment, the service life, as well as their behavior when it comes to maintenance, deconstruction and recycling.
Often, meeting the information demands from designers and procurers means to provide information on: the energy consumption and greenhouse gas emissions related to the production process of the product including both upstream and corporate processes; the energy consumption for the installation and dismantling processes; the service life and maintenance possibilities/needs, and take-back and recycling possibilities. The collection and publication of such information becomes a competitive factor for enterprises and enhances their overall image. Additionally, the optimization of the manufacturing processes and the commitment to sustainability becomes an area of interest for CPMs. The saving or substitution of primary energy sources and primary raw materials lead to benefits such as reduced costs and positive sustainability reports.
However, small and medium-sized manufacturing enterprises (SMEs) often shy away from the effort associated with these tasks. They are not always familiar with scientific principles and normative requirements. It is necessary to support them with knowledge and resources and advise them on the compilation of product information. This paper addresses essential results of IEA EBC Annex57 and specific recommendations, accompanied by supporting information. Additionally, within the paper recommendations are given to improve their production and procurement processes as well as related environmental product information, seeking to improve their overall market competitiveness.
Original languageEnglish
Title of host publicationWorld Sustainable Built Environment Conference 2017 Hong Kong
Subtitle of host publicationConference Proceedings
Place of PublicationHongkong
PublisherHong Kong Green Building Council Limited
Pages989 - 995
ISBN (Electronic)978-988-77943-0-1
Publication statusPublished - Jul 2017
EventWorld Sustainable Built Environment Conference - Convention Hall, Hong Kong, Hong Kong
Duration: 5 Jun 20177 Jun 2017

Conference

ConferenceWorld Sustainable Built Environment Conference
Abbreviated titleWSBE 2017
CountryHong Kong
CityHong Kong
Period5/06/177/06/17

Fingerprint

global warming
energy
manufacturing
recycling
sustainability
resource
competitiveness
substitution
greenhouse gas
environmental impact
market
product
product information
recommendation
cost
energy consumption
demand
services

Keywords

  • small and medium-sized enterprise
  • environmental product declaration
  • supply chain

Fields of Expertise

  • Sustainable Systems

Cite this

Passer, A., Balouktsi, M., Lützkendorf, T., Hinterbrandner, A., & Kreiner, H. (2017). Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers. In World Sustainable Built Environment Conference 2017 Hong Kong : Conference Proceedings (pp. 989 - 995). Hongkong: Hong Kong Green Building Council Limited.

Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers. / Passer, Alexander; Balouktsi, Maria; Lützkendorf, Thomas; Hinterbrandner, Angelika; Kreiner, Helmuth.

World Sustainable Built Environment Conference 2017 Hong Kong : Conference Proceedings. Hongkong : Hong Kong Green Building Council Limited, 2017. p. 989 - 995.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Passer, A, Balouktsi, M, Lützkendorf, T, Hinterbrandner, A & Kreiner, H 2017, Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers. in World Sustainable Built Environment Conference 2017 Hong Kong : Conference Proceedings. Hong Kong Green Building Council Limited, Hongkong, pp. 989 - 995, World Sustainable Built Environment Conference, Hong Kong, Hong Kong, 5/06/17.
Passer A, Balouktsi M, Lützkendorf T, Hinterbrandner A, Kreiner H. Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers. In World Sustainable Built Environment Conference 2017 Hong Kong : Conference Proceedings. Hongkong: Hong Kong Green Building Council Limited. 2017. p. 989 - 995
Passer, Alexander ; Balouktsi, Maria ; Lützkendorf, Thomas ; Hinterbrandner, Angelika ; Kreiner, Helmuth. / Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers. World Sustainable Built Environment Conference 2017 Hong Kong : Conference Proceedings. Hongkong : Hong Kong Green Building Council Limited, 2017. pp. 989 - 995
@inproceedings{a99381b8fd314c80b1bc593ffba3cebb,
title = "Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers",
abstract = "The growing awareness for sustainable construction increases the demand for low environmental impact products among others. This poses new challenges to construction product manufacturers (CPM) not only in terms of developing such products, but also in terms of providing detailed and reliable product information to designers and procurers, as well as manufacturers of more complex products, including information on the use of resources and resulting effects on the global environment, the service life, as well as their behavior when it comes to maintenance, deconstruction and recycling. Often, meeting the information demands from designers and procurers means to provide information on: the energy consumption and greenhouse gas emissions related to the production process of the product including both upstream and corporate processes; the energy consumption for the installation and dismantling processes; the service life and maintenance possibilities/needs, and take-back and recycling possibilities. The collection and publication of such information becomes a competitive factor for enterprises and enhances their overall image. Additionally, the optimization of the manufacturing processes and the commitment to sustainability becomes an area of interest for CPMs. The saving or substitution of primary energy sources and primary raw materials lead to benefits such as reduced costs and positive sustainability reports. However, small and medium-sized manufacturing enterprises (SMEs) often shy away from the effort associated with these tasks. They are not always familiar with scientific principles and normative requirements. It is necessary to support them with knowledge and resources and advise them on the compilation of product information. This paper addresses essential results of IEA EBC Annex57 and specific recommendations, accompanied by supporting information. Additionally, within the paper recommendations are given to improve their production and procurement processes as well as related environmental product information, seeking to improve their overall market competitiveness.",
keywords = "small and medium-sized enterprise, environmental product declaration, supply chain",
author = "Alexander Passer and Maria Balouktsi and Thomas L{\"u}tzkendorf and Angelika Hinterbrandner and Helmuth Kreiner",
year = "2017",
month = "7",
language = "English",
pages = "989 -- 995",
booktitle = "World Sustainable Built Environment Conference 2017 Hong Kong",
publisher = "Hong Kong Green Building Council Limited",
address = "China",

}

TY - GEN

T1 - Generating and Providing Embodied Energy and Global Warming Potential Related Information: Recommendations for Construction Product Manufacturers

AU - Passer, Alexander

AU - Balouktsi, Maria

AU - Lützkendorf, Thomas

AU - Hinterbrandner, Angelika

AU - Kreiner, Helmuth

PY - 2017/7

Y1 - 2017/7

N2 - The growing awareness for sustainable construction increases the demand for low environmental impact products among others. This poses new challenges to construction product manufacturers (CPM) not only in terms of developing such products, but also in terms of providing detailed and reliable product information to designers and procurers, as well as manufacturers of more complex products, including information on the use of resources and resulting effects on the global environment, the service life, as well as their behavior when it comes to maintenance, deconstruction and recycling. Often, meeting the information demands from designers and procurers means to provide information on: the energy consumption and greenhouse gas emissions related to the production process of the product including both upstream and corporate processes; the energy consumption for the installation and dismantling processes; the service life and maintenance possibilities/needs, and take-back and recycling possibilities. The collection and publication of such information becomes a competitive factor for enterprises and enhances their overall image. Additionally, the optimization of the manufacturing processes and the commitment to sustainability becomes an area of interest for CPMs. The saving or substitution of primary energy sources and primary raw materials lead to benefits such as reduced costs and positive sustainability reports. However, small and medium-sized manufacturing enterprises (SMEs) often shy away from the effort associated with these tasks. They are not always familiar with scientific principles and normative requirements. It is necessary to support them with knowledge and resources and advise them on the compilation of product information. This paper addresses essential results of IEA EBC Annex57 and specific recommendations, accompanied by supporting information. Additionally, within the paper recommendations are given to improve their production and procurement processes as well as related environmental product information, seeking to improve their overall market competitiveness.

AB - The growing awareness for sustainable construction increases the demand for low environmental impact products among others. This poses new challenges to construction product manufacturers (CPM) not only in terms of developing such products, but also in terms of providing detailed and reliable product information to designers and procurers, as well as manufacturers of more complex products, including information on the use of resources and resulting effects on the global environment, the service life, as well as their behavior when it comes to maintenance, deconstruction and recycling. Often, meeting the information demands from designers and procurers means to provide information on: the energy consumption and greenhouse gas emissions related to the production process of the product including both upstream and corporate processes; the energy consumption for the installation and dismantling processes; the service life and maintenance possibilities/needs, and take-back and recycling possibilities. The collection and publication of such information becomes a competitive factor for enterprises and enhances their overall image. Additionally, the optimization of the manufacturing processes and the commitment to sustainability becomes an area of interest for CPMs. The saving or substitution of primary energy sources and primary raw materials lead to benefits such as reduced costs and positive sustainability reports. However, small and medium-sized manufacturing enterprises (SMEs) often shy away from the effort associated with these tasks. They are not always familiar with scientific principles and normative requirements. It is necessary to support them with knowledge and resources and advise them on the compilation of product information. This paper addresses essential results of IEA EBC Annex57 and specific recommendations, accompanied by supporting information. Additionally, within the paper recommendations are given to improve their production and procurement processes as well as related environmental product information, seeking to improve their overall market competitiveness.

KW - small and medium-sized enterprise

KW - environmental product declaration

KW - supply chain

M3 - Conference contribution

SP - 989

EP - 995

BT - World Sustainable Built Environment Conference 2017 Hong Kong

PB - Hong Kong Green Building Council Limited

CY - Hongkong

ER -