Before new mixes are sprayed in real scale applications, lab experiments have to be carried out to provide a basis for predicting a good performance in real scale. In many cases, to understand the correlations between the behavior in the lab and in real scale spraying, a further set of experiments after the real spraying is required. In this paper we present such a two way process for two new wet mixes, one with a very low tricalcium aluminate Portland cement and the other one with a CEM I with addition of ultra-fine calcite. Calorimetry and Shear-Modulus measurements were used in the lab to monitor hydration evolution. In the real scale spraying compressive strength was measured at periodic intervals up to 24 hours. The hydration of the sprayed samples was stopped at 3, 6 and 24 hours and samples were scanned with X-ray for the identification and quantification of the phases present. The results presented are used to discuss the extent to which lab experiments can predict the behavior of mixes in real scale and how small changes in the raw materials and the mixes can lead to quite different results.
|Publication status||Published - 2018|
|Event||Sprayed Concrete 2018 - Trondheim, Norway|
Duration: 11 Jun 2018 → 14 Jun 2018
|Conference||Sprayed Concrete 2018|
|Period||11/06/18 → 14/06/18|