Experimental analysis of the flow pattern of a pump turbine model in pump mode

Mark Guggenberger, Florian Senn, Helmut Jaberg, Arno Gehrer, Manfred Sallaberger, Christian Widmer

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

Reversible pump turbines are the only means to store primary energy in an highly efficient way. Within a short time their operation can be switched between the different operational regimes thus enhancing the stabilization of the electric grid. These qualities in combination with the operation even at off-design conditions offer a high flexibility to the energy market. However, pump turbines pass through operational regimes where their behaviour becomes unstable. One of these effects occurs when the flowrate is decreased continuously down to a minimum. This point is the physical limitation of the pump operation and is very difficult to predict properly by numerical design without a model test. The purpose of the present study is to identify the fluid mechanical phenomena leading to the occurrence of instabilities of pump turbines in pump mode. A reduced scale model of a ANDRITZ pump turbine was installed on a 4-quadrant test rig for the experimental investigation of unstable conditions in pump mode. The performed measurements are based on the IEC60193-standard. Characteristic measurements at a single guide vane opening were carried out to get a detailed insight into the instabilities in pump mode. The interaction between runner and guide vane was analysed by Particle Image Velocimetry. Furthermore, high-speed visualizations of the suction side part load flow and the suction recirculation were performed. Like never before the flow pattern in the draft tube cone became visible with the help of a high-speed camera by intentionally caused cavitation effects which allow a qualitative view on the flow pattern in the draft tube cone. Suction recirculation is observed in form of single vortices separating from each runner blade and stretching into the draft tube against the main flow direction. To find an explanation for the flow phenomena responsible for the appearance of the unstable head curve also characteristic velocity distributions on the pressure side were combined with high-speed visualizations on the suction side of the pump turbine model. The results enhance the comprehension of the physical background leading to the instability and improve the numerical predictability of the instability in pump mode.
Original languageEnglish
Title of host publicationIAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016
Subtitle of host publicationPublication in IOP Conference Series
DOIs
Publication statusPublished - 4 Jul 2016
Event28th IAHR symposium on Hydraulic Machinery and Systems - Grenoble, France
Duration: 3 Jul 20168 Jul 2016

Conference

Conference28th IAHR symposium on Hydraulic Machinery and Systems
Abbreviated titleIAHR2016
CountryFrance
CityGrenoble
Period3/07/168/07/16

Keywords

    Fields of Expertise

    • Sustainable Systems

    Cite this

    Guggenberger, M., Senn, F., Jaberg, H., Gehrer, A., Sallaberger, M., & Widmer, C. (2016). Experimental analysis of the flow pattern of a pump turbine model in pump mode. In IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series https://doi.org/10.1088/1755-1315/49/4/042001

    Experimental analysis of the flow pattern of a pump turbine model in pump mode. / Guggenberger, Mark; Senn, Florian; Jaberg, Helmut; Gehrer, Arno; Sallaberger, Manfred; Widmer, Christian.

    IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series. 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

    Guggenberger, M, Senn, F, Jaberg, H, Gehrer, A, Sallaberger, M & Widmer, C 2016, Experimental analysis of the flow pattern of a pump turbine model in pump mode. in IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series. 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, 3/07/16. https://doi.org/10.1088/1755-1315/49/4/042001
    Guggenberger M, Senn F, Jaberg H, Gehrer A, Sallaberger M, Widmer C. Experimental analysis of the flow pattern of a pump turbine model in pump mode. In IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series. 2016 https://doi.org/10.1088/1755-1315/49/4/042001
    Guggenberger, Mark ; Senn, Florian ; Jaberg, Helmut ; Gehrer, Arno ; Sallaberger, Manfred ; Widmer, Christian. / Experimental analysis of the flow pattern of a pump turbine model in pump mode. IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016 : Publication in IOP Conference Series. 2016.
    @inproceedings{91098ed3027f4e4c953eff54f9946b56,
    title = "Experimental analysis of the flow pattern of a pump turbine model in pump mode",
    abstract = "Reversible pump turbines are the only means to store primary energy in an highly efficient way. Within a short time their operation can be switched between the different operational regimes thus enhancing the stabilization of the electric grid. These qualities in combination with the operation even at off-design conditions offer a high flexibility to the energy market. However, pump turbines pass through operational regimes where their behaviour becomes unstable. One of these effects occurs when the flowrate is decreased continuously down to a minimum. This point is the physical limitation of the pump operation and is very difficult to predict properly by numerical design without a model test. The purpose of the present study is to identify the fluid mechanical phenomena leading to the occurrence of instabilities of pump turbines in pump mode. A reduced scale model of a ANDRITZ pump turbine was installed on a 4-quadrant test rig for the experimental investigation of unstable conditions in pump mode. The performed measurements are based on the IEC60193-standard. Characteristic measurements at a single guide vane opening were carried out to get a detailed insight into the instabilities in pump mode. The interaction between runner and guide vane was analysed by Particle Image Velocimetry. Furthermore, high-speed visualizations of the suction side part load flow and the suction recirculation were performed. Like never before the flow pattern in the draft tube cone became visible with the help of a high-speed camera by intentionally caused cavitation effects which allow a qualitative view on the flow pattern in the draft tube cone. Suction recirculation is observed in form of single vortices separating from each runner blade and stretching into the draft tube against the main flow direction. To find an explanation for the flow phenomena responsible for the appearance of the unstable head curve also characteristic velocity distributions on the pressure side were combined with high-speed visualizations on the suction side of the pump turbine model. The results enhance the comprehension of the physical background leading to the instability and improve the numerical predictability of the instability in pump mode.",
    keywords = "Pumped Storage Hydropower, PIV Method, Pump instability",
    author = "Mark Guggenberger and Florian Senn and Helmut Jaberg and Arno Gehrer and Manfred Sallaberger and Christian Widmer",
    year = "2016",
    month = "7",
    day = "4",
    doi = "10.1088/1755-1315/49/4/042001",
    language = "English",
    booktitle = "IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016",

    }

    TY - GEN

    T1 - Experimental analysis of the flow pattern of a pump turbine model in pump mode

    AU - Guggenberger, Mark

    AU - Senn, Florian

    AU - Jaberg, Helmut

    AU - Gehrer, Arno

    AU - Sallaberger, Manfred

    AU - Widmer, Christian

    PY - 2016/7/4

    Y1 - 2016/7/4

    N2 - Reversible pump turbines are the only means to store primary energy in an highly efficient way. Within a short time their operation can be switched between the different operational regimes thus enhancing the stabilization of the electric grid. These qualities in combination with the operation even at off-design conditions offer a high flexibility to the energy market. However, pump turbines pass through operational regimes where their behaviour becomes unstable. One of these effects occurs when the flowrate is decreased continuously down to a minimum. This point is the physical limitation of the pump operation and is very difficult to predict properly by numerical design without a model test. The purpose of the present study is to identify the fluid mechanical phenomena leading to the occurrence of instabilities of pump turbines in pump mode. A reduced scale model of a ANDRITZ pump turbine was installed on a 4-quadrant test rig for the experimental investigation of unstable conditions in pump mode. The performed measurements are based on the IEC60193-standard. Characteristic measurements at a single guide vane opening were carried out to get a detailed insight into the instabilities in pump mode. The interaction between runner and guide vane was analysed by Particle Image Velocimetry. Furthermore, high-speed visualizations of the suction side part load flow and the suction recirculation were performed. Like never before the flow pattern in the draft tube cone became visible with the help of a high-speed camera by intentionally caused cavitation effects which allow a qualitative view on the flow pattern in the draft tube cone. Suction recirculation is observed in form of single vortices separating from each runner blade and stretching into the draft tube against the main flow direction. To find an explanation for the flow phenomena responsible for the appearance of the unstable head curve also characteristic velocity distributions on the pressure side were combined with high-speed visualizations on the suction side of the pump turbine model. The results enhance the comprehension of the physical background leading to the instability and improve the numerical predictability of the instability in pump mode.

    AB - Reversible pump turbines are the only means to store primary energy in an highly efficient way. Within a short time their operation can be switched between the different operational regimes thus enhancing the stabilization of the electric grid. These qualities in combination with the operation even at off-design conditions offer a high flexibility to the energy market. However, pump turbines pass through operational regimes where their behaviour becomes unstable. One of these effects occurs when the flowrate is decreased continuously down to a minimum. This point is the physical limitation of the pump operation and is very difficult to predict properly by numerical design without a model test. The purpose of the present study is to identify the fluid mechanical phenomena leading to the occurrence of instabilities of pump turbines in pump mode. A reduced scale model of a ANDRITZ pump turbine was installed on a 4-quadrant test rig for the experimental investigation of unstable conditions in pump mode. The performed measurements are based on the IEC60193-standard. Characteristic measurements at a single guide vane opening were carried out to get a detailed insight into the instabilities in pump mode. The interaction between runner and guide vane was analysed by Particle Image Velocimetry. Furthermore, high-speed visualizations of the suction side part load flow and the suction recirculation were performed. Like never before the flow pattern in the draft tube cone became visible with the help of a high-speed camera by intentionally caused cavitation effects which allow a qualitative view on the flow pattern in the draft tube cone. Suction recirculation is observed in form of single vortices separating from each runner blade and stretching into the draft tube against the main flow direction. To find an explanation for the flow phenomena responsible for the appearance of the unstable head curve also characteristic velocity distributions on the pressure side were combined with high-speed visualizations on the suction side of the pump turbine model. The results enhance the comprehension of the physical background leading to the instability and improve the numerical predictability of the instability in pump mode.

    KW - Pumped Storage Hydropower

    KW - PIV Method

    KW - Pump instability

    U2 - 10.1088/1755-1315/49/4/042001

    DO - 10.1088/1755-1315/49/4/042001

    M3 - Conference contribution

    BT - IAHR Conference on Hydraulic machines and systems, Grenoble, 4-8 July 2016

    ER -