Evolution of the substructure of a novel 12% Cr steel under creep conditions

Surya Deo Yadav, Szilvia Kalácska, Mária Dománková, David Canelo Yubero, Roland Resel, István Groma, Coline Beal, Bernhard Sonderegger, Christof Sommitsch, Maria Cecilia Poletti

Research output: Contribution to journalArticleResearchpeer-review

Abstract

In this work we study the microstruture evolution of a newly developed 12% Cr martensitic/ferritic steel in as-received condition and after creep at 650 °C under 130 MPa and 80 MPa. The microstructure is described as consisting of mobile dislocations, dipole dislocations, boundary dislocations, precipitates, lath boundaries, block boundaries, packet boundaries and prior austenitic grain boundaries. The material is characterized employing light optical microscopy (LOM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). TEM is used to characterize the dislocations (mobile + dipole) inside the subgrains and XRD measurements are used to the characterize mobile dislocations. Based on the subgrain boundary misorientations obtained from EBSD measurements, the boundary dislocation density is estimated. The total dislocation density is estimated for the as-received and crept conditions adding the mobile, boundary and dipole dislocation densities. Additionally, the subgrain size is estimated from the EBSD measurements. In this publication we propose the use of three characterization techniques TEM, XRD and EBSD as necessary to characterize all type of dislocations and quantify the total dislocation densty in martensitic/ferritic steels.

Original languageEnglish
Pages (from-to)23-31
Number of pages9
JournalMaterials characterization
Volume115
DOIs
Publication statusPublished - 1 May 2016

Fingerprint

Steel
substructures
Electron diffraction
Creep
steels
Martensitic steel
Ferritic steel
Transmission electron microscopy
X ray diffraction
Optical microscopy
diffraction
Precipitates
dipoles
Grain boundaries
transmission electron microscopy
electrons
Microstructure
Scanning electron microscopy
x rays
misalignment

Keywords

  • Creep
  • Dislocations
  • EBSD
  • Rietveld refinement
  • TEM
  • XRD

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Evolution of the substructure of a novel 12% Cr steel under creep conditions. / Yadav, Surya Deo; Kalácska, Szilvia; Dománková, Mária; Yubero, David Canelo; Resel, Roland; Groma, István; Beal, Coline; Sonderegger, Bernhard; Sommitsch, Christof; Poletti, Maria Cecilia.

In: Materials characterization, Vol. 115, 01.05.2016, p. 23-31.

Research output: Contribution to journalArticleResearchpeer-review

Yadav, Surya Deo ; Kalácska, Szilvia ; Dománková, Mária ; Yubero, David Canelo ; Resel, Roland ; Groma, István ; Beal, Coline ; Sonderegger, Bernhard ; Sommitsch, Christof ; Poletti, Maria Cecilia. / Evolution of the substructure of a novel 12% Cr steel under creep conditions. In: Materials characterization. 2016 ; Vol. 115. pp. 23-31.
@article{2cb4548de2f045df95529f72ddae5701,
title = "Evolution of the substructure of a novel 12{\%} Cr steel under creep conditions",
abstract = "In this work we study the microstruture evolution of a newly developed 12{\%} Cr martensitic/ferritic steel in as-received condition and after creep at 650 °C under 130 MPa and 80 MPa. The microstructure is described as consisting of mobile dislocations, dipole dislocations, boundary dislocations, precipitates, lath boundaries, block boundaries, packet boundaries and prior austenitic grain boundaries. The material is characterized employing light optical microscopy (LOM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). TEM is used to characterize the dislocations (mobile + dipole) inside the subgrains and XRD measurements are used to the characterize mobile dislocations. Based on the subgrain boundary misorientations obtained from EBSD measurements, the boundary dislocation density is estimated. The total dislocation density is estimated for the as-received and crept conditions adding the mobile, boundary and dipole dislocation densities. Additionally, the subgrain size is estimated from the EBSD measurements. In this publication we propose the use of three characterization techniques TEM, XRD and EBSD as necessary to characterize all type of dislocations and quantify the total dislocation densty in martensitic/ferritic steels.",
keywords = "Creep, Dislocations, EBSD, Rietveld refinement, TEM, XRD",
author = "Yadav, {Surya Deo} and Szilvia Kal{\'a}cska and M{\'a}ria Dom{\'a}nkov{\'a} and Yubero, {David Canelo} and Roland Resel and Istv{\'a}n Groma and Coline Beal and Bernhard Sonderegger and Christof Sommitsch and Poletti, {Maria Cecilia}",
year = "2016",
month = "5",
day = "1",
doi = "10.1016/j.matchar.2016.03.015",
language = "English",
volume = "115",
pages = "23--31",
journal = "Materials characterization",
issn = "1044-5803",
publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Evolution of the substructure of a novel 12% Cr steel under creep conditions

AU - Yadav, Surya Deo

AU - Kalácska, Szilvia

AU - Dománková, Mária

AU - Yubero, David Canelo

AU - Resel, Roland

AU - Groma, István

AU - Beal, Coline

AU - Sonderegger, Bernhard

AU - Sommitsch, Christof

AU - Poletti, Maria Cecilia

PY - 2016/5/1

Y1 - 2016/5/1

N2 - In this work we study the microstruture evolution of a newly developed 12% Cr martensitic/ferritic steel in as-received condition and after creep at 650 °C under 130 MPa and 80 MPa. The microstructure is described as consisting of mobile dislocations, dipole dislocations, boundary dislocations, precipitates, lath boundaries, block boundaries, packet boundaries and prior austenitic grain boundaries. The material is characterized employing light optical microscopy (LOM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). TEM is used to characterize the dislocations (mobile + dipole) inside the subgrains and XRD measurements are used to the characterize mobile dislocations. Based on the subgrain boundary misorientations obtained from EBSD measurements, the boundary dislocation density is estimated. The total dislocation density is estimated for the as-received and crept conditions adding the mobile, boundary and dipole dislocation densities. Additionally, the subgrain size is estimated from the EBSD measurements. In this publication we propose the use of three characterization techniques TEM, XRD and EBSD as necessary to characterize all type of dislocations and quantify the total dislocation densty in martensitic/ferritic steels.

AB - In this work we study the microstruture evolution of a newly developed 12% Cr martensitic/ferritic steel in as-received condition and after creep at 650 °C under 130 MPa and 80 MPa. The microstructure is described as consisting of mobile dislocations, dipole dislocations, boundary dislocations, precipitates, lath boundaries, block boundaries, packet boundaries and prior austenitic grain boundaries. The material is characterized employing light optical microscopy (LOM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). TEM is used to characterize the dislocations (mobile + dipole) inside the subgrains and XRD measurements are used to the characterize mobile dislocations. Based on the subgrain boundary misorientations obtained from EBSD measurements, the boundary dislocation density is estimated. The total dislocation density is estimated for the as-received and crept conditions adding the mobile, boundary and dipole dislocation densities. Additionally, the subgrain size is estimated from the EBSD measurements. In this publication we propose the use of three characterization techniques TEM, XRD and EBSD as necessary to characterize all type of dislocations and quantify the total dislocation densty in martensitic/ferritic steels.

KW - Creep

KW - Dislocations

KW - EBSD

KW - Rietveld refinement

KW - TEM

KW - XRD

UR - http://www.scopus.com/inward/record.url?scp=84962052755&partnerID=8YFLogxK

U2 - 10.1016/j.matchar.2016.03.015

DO - 10.1016/j.matchar.2016.03.015

M3 - Article

VL - 115

SP - 23

EP - 31

JO - Materials characterization

JF - Materials characterization

SN - 1044-5803

ER -