Effects of Mechanical Tolerances of USB 2.0 Cables on Skew and Radiated Emission

Omid Hoseini Izadi*, Ahmad Hosseinbeig, Guanghua Li, David Pommerenke

*Corresponding author for this work

Research output: Contribution to journalArticle

Abstract

This paper analyzes skew due to unavoidable mechanical tolerances of a universal serial bus (USB) 2.0 cable. The contribution of the tolerances to the skew is determined via full-wave simulation of the cable cross section. The contributing factors and interaction terms are found using fractional factorial experimental design. Each factor's sensitivity to skew is investigated using Monte Carlo simulations. The design of experiments approach allows recognition of the relationship between the mechanical tolerances and skew. The skew-emission relationship, however, is found through a systematic approach. It was observed that adding about 20-30 ps net skew leads to about 4-5 dB increase in the emission above 350 MHz.

Original languageEnglish
Article number8561155
Pages (from-to)249-257
Number of pages9
JournalIEEE Transactions on Electromagnetic Compatibility
Volume62
Issue number1
DOIs
Publication statusPublished - 1 Feb 2020
Externally publishedYes

Keywords

  • Design of experiments (DoE)
  • fractional factorial experimental design
  • high speed universal serial bus (USB) cables
  • mechanical tolerances
  • radiated emission
  • skew

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Effects of Mechanical Tolerances of USB 2.0 Cables on Skew and Radiated Emission'. Together they form a unique fingerprint.

  • Cite this