Effects of Lubrication, Temperature and Surface Topography in Aluminum Sheet Forming

Arash Shafiee Sabet; Josef Domitner; Kerem Öksüz; Manel Rodriguez Ripoll; Christof Sommitsch

Effects of Lubrication, Temperature and Surface Topography in Aluminum Sheet Forming

Arash Shafiee Sabet^*, Josef Domitner, Kerem Öksüz, Manel Rodriguez Ripoll, Christof Sommitsch

^*Corresponding author for this work

Research output: Contribution to conference › Abstract › peer-review

Abstract

n order to investigate the tribological system in aluminum sheet forming, pin-on-plate tests were performed on three types of lubricated aluminum plates at room temperature (RT) and at 100 °C. The lubricant compositions were analyzed using high resolution mass spectrometry. Additionally, the surface topographies of the aluminum plates were investigated using an optical 3D profiler. The results showed remarkable increase of the coefficient of friction (COF) at 100 °C. The COF was in the ranges of 0.07-0.10 and 0.13-0.29 at RT and 100 °C, respectively. The main wear mechanisms during the friction tests were flattening of the asperities and ploughing

Original language	English
Pages	WED-T9-S7-R11
Number of pages	1
Publication status	Published - 2022
Event	7th World Tribology Congress: WTC 2022 - Lyon, France Duration: 10 Jul 2022 → 15 Jul 2022

Conference

Conference	7th World Tribology Congress
Abbreviated title	WTC 2022
Country/Territory	France
City	Lyon
Period	10/07/22 → 15/07/22

Fields of Expertise

Mobility & Production

Access to Document

https://www.wtc-2022.org/abstract/export/abstract-A102269AS.pdf

1 Finished

AluTribo - Tribology in Aluminum Sheet Forming
Domitner, J.
1/04/19 → 31/03/22
Project: Research project

Cite this

@conference{c383b49fb69140d68229d5990e09a0b8,

title = "Effects of Lubrication, Temperature and Surface Topography in Aluminum Sheet Forming",

abstract = "n order to investigate the tribological system in aluminum sheet forming, pin-on-plate tests were performed on three types of lubricated aluminum plates at room temperature (RT) and at 100 °C. The lubricant compositions were analyzed using high resolution mass spectrometry. Additionally, the surface topographies of the aluminum plates were investigated using an optical 3D profiler. The results showed remarkable increase of the coefficient of friction (COF) at 100 °C. The COF was in the ranges of 0.07-0.10 and 0.13-0.29 at RT and 100 °C, respectively. The main wear mechanisms during the friction tests were flattening of the asperities and ploughing",

author = "{Shafiee Sabet}, Arash and Josef Domitner and Kerem {\"O}ks{\"u}z and {Rodriguez Ripoll}, Manel and Christof Sommitsch",

year = "2022",

language = "English",

pages = "WED--T9--S7--R11",

note = "7th World Tribology Congress : WTC 2022, WTC 2022 ; Conference date: 10-07-2022 Through 15-07-2022",

}

TY - CONF

T1 - Effects of Lubrication, Temperature and Surface Topography in Aluminum Sheet Forming

AU - Shafiee Sabet, Arash

AU - Domitner, Josef

AU - Öksüz, Kerem

AU - Rodriguez Ripoll, Manel

AU - Sommitsch, Christof

PY - 2022

Y1 - 2022

N2 - n order to investigate the tribological system in aluminum sheet forming, pin-on-plate tests were performed on three types of lubricated aluminum plates at room temperature (RT) and at 100 °C. The lubricant compositions were analyzed using high resolution mass spectrometry. Additionally, the surface topographies of the aluminum plates were investigated using an optical 3D profiler. The results showed remarkable increase of the coefficient of friction (COF) at 100 °C. The COF was in the ranges of 0.07-0.10 and 0.13-0.29 at RT and 100 °C, respectively. The main wear mechanisms during the friction tests were flattening of the asperities and ploughing

AB - n order to investigate the tribological system in aluminum sheet forming, pin-on-plate tests were performed on three types of lubricated aluminum plates at room temperature (RT) and at 100 °C. The lubricant compositions were analyzed using high resolution mass spectrometry. Additionally, the surface topographies of the aluminum plates were investigated using an optical 3D profiler. The results showed remarkable increase of the coefficient of friction (COF) at 100 °C. The COF was in the ranges of 0.07-0.10 and 0.13-0.29 at RT and 100 °C, respectively. The main wear mechanisms during the friction tests were flattening of the asperities and ploughing

M3 - Abstract

SP - WED-T9-S7-R11

T2 - 7th World Tribology Congress

Y2 - 10 July 2022 through 15 July 2022

ER -

Effects of Lubrication, Temperature and Surface Topography in Aluminum Sheet Forming

Abstract

Conference

Fields of Expertise

Access to Document

Fingerprint

Projects

AluTribo - Tribology in Aluminum Sheet Forming

Cite this