Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions

Richard Viskup, Thomas Stanger, Luigi Del Re, Tristan Reinisch, Alexander Bergmann

Research output: Contribution to conferencePaperResearchpeer-review

Abstract

The Laser Induced Incandescence technique (LII) is a sensitive optical method for reliable spatially and temporally resolved measurement of particulate matter (PM) concentration. This technique appears to be suitable for measurement of fast transient PM emissions, from diesel engines, which forms the main fraction of total emissions during standardized test cycles. However, the existing commercial LII devices require modifications in the exhaust gas flow, dilution, sampling cell, or it measure only in a partial stream. This article presents the development of a laser based optical setup - LII for rapid in-situ measurement of PM concentrations during the combustion process of a diesel production engine. The presented LII setup is suitable for direct in-situ, full stream, measurements of soot emissions without needs of dilution or a sampling cell. The focus of this paper is to measure static and transient PM emissions at tail pipe of an EURO 5 passenger car 2l diesel production engine by LII. A comparison of the LII approach with commercial devices based on photo-acoustic principle, opacity and filter blackening is also given. Results obtained from the fast in-situ LII device can help in better understanding of PM emissions and support dynamic emission modelling as well as control design for development of virtual PM sensors.

Original languageEnglish
DOIs
Publication statusPublished - 19 Dec 2013
Externally publishedYes
Event11th International Conference on Engines and Vehicles, ICE 2013 - Capri, Naples, Italy
Duration: 15 Sep 201319 Sep 2013

Conference

Conference11th International Conference on Engines and Vehicles, ICE 2013
CountryItaly
CityCapri, Naples
Period15/09/1319/09/13

Fingerprint

Soot
Lasers
Dilution
Sampling
Engines
Opacity
Passenger cars
Exhaust gases
Flow of gases
Diesel engines
Acoustics
Pipe
Sensors

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Cite this

Viskup, R., Stanger, T., Del Re, L., Reinisch, T., & Bergmann, A. (2013). Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions. Paper presented at 11th International Conference on Engines and Vehicles, ICE 2013, Capri, Naples, Italy. https://doi.org/10.4271/2013-24-0169

Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions. / Viskup, Richard; Stanger, Thomas; Del Re, Luigi; Reinisch, Tristan; Bergmann, Alexander.

2013. Paper presented at 11th International Conference on Engines and Vehicles, ICE 2013, Capri, Naples, Italy.

Research output: Contribution to conferencePaperResearchpeer-review

Viskup, R, Stanger, T, Del Re, L, Reinisch, T & Bergmann, A 2013, 'Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions' Paper presented at 11th International Conference on Engines and Vehicles, ICE 2013, Capri, Naples, Italy, 15/09/13 - 19/09/13, . https://doi.org/10.4271/2013-24-0169
Viskup R, Stanger T, Del Re L, Reinisch T, Bergmann A. Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions. 2013. Paper presented at 11th International Conference on Engines and Vehicles, ICE 2013, Capri, Naples, Italy. https://doi.org/10.4271/2013-24-0169
Viskup, Richard ; Stanger, Thomas ; Del Re, Luigi ; Reinisch, Tristan ; Bergmann, Alexander. / Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions. Paper presented at 11th International Conference on Engines and Vehicles, ICE 2013, Capri, Naples, Italy.
@conference{37d6eef4c644417991bb2b601f24fd46,
title = "Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions",
abstract = "The Laser Induced Incandescence technique (LII) is a sensitive optical method for reliable spatially and temporally resolved measurement of particulate matter (PM) concentration. This technique appears to be suitable for measurement of fast transient PM emissions, from diesel engines, which forms the main fraction of total emissions during standardized test cycles. However, the existing commercial LII devices require modifications in the exhaust gas flow, dilution, sampling cell, or it measure only in a partial stream. This article presents the development of a laser based optical setup - LII for rapid in-situ measurement of PM concentrations during the combustion process of a diesel production engine. The presented LII setup is suitable for direct in-situ, full stream, measurements of soot emissions without needs of dilution or a sampling cell. The focus of this paper is to measure static and transient PM emissions at tail pipe of an EURO 5 passenger car 2l diesel production engine by LII. A comparison of the LII approach with commercial devices based on photo-acoustic principle, opacity and filter blackening is also given. Results obtained from the fast in-situ LII device can help in better understanding of PM emissions and support dynamic emission modelling as well as control design for development of virtual PM sensors.",
author = "Richard Viskup and Thomas Stanger and {Del Re}, Luigi and Tristan Reinisch and Alexander Bergmann",
year = "2013",
month = "12",
day = "19",
doi = "10.4271/2013-24-0169",
language = "English",
note = "11th International Conference on Engines and Vehicles, ICE 2013 ; Conference date: 15-09-2013 Through 19-09-2013",

}

TY - CONF

T1 - Development of in-situ, full stream, Laser induced incandescence technique for measurement of transient soot emissions

AU - Viskup, Richard

AU - Stanger, Thomas

AU - Del Re, Luigi

AU - Reinisch, Tristan

AU - Bergmann, Alexander

PY - 2013/12/19

Y1 - 2013/12/19

N2 - The Laser Induced Incandescence technique (LII) is a sensitive optical method for reliable spatially and temporally resolved measurement of particulate matter (PM) concentration. This technique appears to be suitable for measurement of fast transient PM emissions, from diesel engines, which forms the main fraction of total emissions during standardized test cycles. However, the existing commercial LII devices require modifications in the exhaust gas flow, dilution, sampling cell, or it measure only in a partial stream. This article presents the development of a laser based optical setup - LII for rapid in-situ measurement of PM concentrations during the combustion process of a diesel production engine. The presented LII setup is suitable for direct in-situ, full stream, measurements of soot emissions without needs of dilution or a sampling cell. The focus of this paper is to measure static and transient PM emissions at tail pipe of an EURO 5 passenger car 2l diesel production engine by LII. A comparison of the LII approach with commercial devices based on photo-acoustic principle, opacity and filter blackening is also given. Results obtained from the fast in-situ LII device can help in better understanding of PM emissions and support dynamic emission modelling as well as control design for development of virtual PM sensors.

AB - The Laser Induced Incandescence technique (LII) is a sensitive optical method for reliable spatially and temporally resolved measurement of particulate matter (PM) concentration. This technique appears to be suitable for measurement of fast transient PM emissions, from diesel engines, which forms the main fraction of total emissions during standardized test cycles. However, the existing commercial LII devices require modifications in the exhaust gas flow, dilution, sampling cell, or it measure only in a partial stream. This article presents the development of a laser based optical setup - LII for rapid in-situ measurement of PM concentrations during the combustion process of a diesel production engine. The presented LII setup is suitable for direct in-situ, full stream, measurements of soot emissions without needs of dilution or a sampling cell. The focus of this paper is to measure static and transient PM emissions at tail pipe of an EURO 5 passenger car 2l diesel production engine by LII. A comparison of the LII approach with commercial devices based on photo-acoustic principle, opacity and filter blackening is also given. Results obtained from the fast in-situ LII device can help in better understanding of PM emissions and support dynamic emission modelling as well as control design for development of virtual PM sensors.

UR - http://www.scopus.com/inward/record.url?scp=84890377881&partnerID=8YFLogxK

U2 - 10.4271/2013-24-0169

DO - 10.4271/2013-24-0169

M3 - Paper

ER -