Contact Angle Measurement on Porous Substrates: Effect of Liquid Absorption and Drop Size

Sarah Krainer, Ulrich Hirn*

*Corresponding author for this work

Research output: Contribution to journalArticle

Abstract

The contact angle Θ measured on rough, absorbing substrates is known to decrease with proceeding imbibition of the drop. We demonstrate that the impact of three absorption related parameters (absorption rate, drop size and residence time) on the measured contact angle is comprehensively captured by the relative absorbed drop volume, i.e. the percentage of the drop volume penetrated into the substrate. We analyzed a wide range of drop volumes (30 pl to 4 μl, spanning a factor 105) on substrates with very different liquid absorption rates (6–710 ml m−2s−1). Also the effect of liquid surface tension (26.8–73 mN m−1) and the effect of evaporation have been evaluated. Analyzing the development of drop volume and contact angle over time one can identify the regimes of (1) surface roughness filling and (2) bulk penetration. Independent of drop size, absorption rate and drop residence time the contact angle decreases between ~0. 5° to ~1. 2° for each percentage point of drop volume penetrated into the substrate. Thus, the relative amount of absorbed drop volume fully captures the combined effect of drop size, contact time and substrate absorption rate on the contact angle measurement, it can be used to estimate the effect of liquid penetration on the measured contact angle. The effect of evaporation was negligible for most water based liquids. In conclusion, contact angle values measured on absorbing substrates can only be compared for the same percentage of absorbed drop volume, e.g. when 30% of the drop volume has been absorbed
Original languageEnglish
Article number126503
Number of pages10
JournalColloids and Surfaces / A
Volume619
DOIs
Publication statusPublished - 20 Jun 2021

Keywords

  • Absorbing substrate
  • Contact angle
  • Drop volume
  • Evaporation
  • Surface tension

ASJC Scopus subject areas

  • Surfaces and Interfaces
  • Physical and Theoretical Chemistry
  • Colloid and Surface Chemistry

Fields of Expertise

  • Advanced Materials Science

Fingerprint Dive into the research topics of 'Contact Angle Measurement on Porous Substrates: Effect of Liquid Absorption and Drop Size'. Together they form a unique fingerprint.

Cite this