Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties

Julie Bossu, Chiara Valentina Czibula, Armin Winter, Wolfgang Gindl-Altmutter, Rene Eckhart, Armin Zankel, Wolfgang Bauer

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

Recently fine cellulosic materials such as microfibrillated celluloses (MFCs) have become an interesting additive in papermaking, improving paper mechanical properties thanks to their intrinsic high mechanical strength along with high potential to interact with cellulosic fibres.
In this study, we produced and compared: (i) a mixture of primary and secondary fines isolated from the pulp by means of a purpose-built laboratory pressure screen and (ii) MFC-like materials obtained by refining and subsequent steps of high-pressure homogenization. Morphological properties were determined using flow cell based and microscopic techniques, showing a wide size distribution of the fibrillated materials produced. The thus obtained materials were applied in handsheet forming in blends of different proportions to evaluate their influence on paper properties. Already at low concentration all tested products lead to a substantial decrease in air permeability and to improved mechanical properties, independent of the type and morphological character of the added fine cellulosic material. At higher addition rates, only highly fibrillated materials allowed a further considerable increase in tensile strength, which could be explained by the creation of a secondary network structure of highly fibrillated materials improving the load-bearing capacity of the whole paper structure.
Original languageEnglish
Title of host publicationProceedings of the International Paper Physics Conference 2019
Subtitle of host publicationHeld in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis
PublisherTappi Press
Pages247-259
Number of pages13
Publication statusPublished - May 2019
EventInternational Paper Physics Conference: Held in conjunction with PaperCon2019 - Indiana Convention Center, Indianapolis, United States
Duration: 5 May 20198 May 2019
https://papercon.org/program/international-paper-physics-conference-2019/

Conference

ConferenceInternational Paper Physics Conference
Abbreviated titleIPPC
CountryUnited States
CityIndianapolis
Period5/05/198/05/19
Internet address

Fingerprint

Chemical pulp
Cellulose
Air permeability
Mechanical properties
Papermaking
Bearing capacity
Refining
Pulp
Strength of materials
Loads (forces)
Tensile strength
Fibers

Keywords

  • microfibrillated cellulose
  • pulp fines

ASJC Scopus subject areas

  • Materials Science (miscellaneous)

Fields of Expertise

  • Advanced Materials Science

Cite this

Bossu, J., Czibula, C. V., Winter, A., Gindl-Altmutter, W., Eckhart, R., Zankel, A., & Bauer, W. (2019). Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties. In Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis (pp. 247-259). Tappi Press.

Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties. / Bossu, Julie; Czibula, Chiara Valentina; Winter, Armin; Gindl-Altmutter, Wolfgang; Eckhart, Rene; Zankel, Armin; Bauer, Wolfgang.

Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, 2019. p. 247-259.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bossu, J, Czibula, CV, Winter, A, Gindl-Altmutter, W, Eckhart, R, Zankel, A & Bauer, W 2019, Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties. in Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, pp. 247-259, International Paper Physics Conference, Indianapolis, United States, 5/05/19.
Bossu J, Czibula CV, Winter A, Gindl-Altmutter W, Eckhart R, Zankel A et al. Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties. In Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press. 2019. p. 247-259
Bossu, Julie ; Czibula, Chiara Valentina ; Winter, Armin ; Gindl-Altmutter, Wolfgang ; Eckhart, Rene ; Zankel, Armin ; Bauer, Wolfgang. / Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties. Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, 2019. pp. 247-259
@inproceedings{07a663347f204dff99bc14eb25585726,
title = "Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties",
abstract = "Recently fine cellulosic materials such as microfibrillated celluloses (MFCs) have become an interesting additive in papermaking, improving paper mechanical properties thanks to their intrinsic high mechanical strength along with high potential to interact with cellulosic fibres. In this study, we produced and compared: (i) a mixture of primary and secondary fines isolated from the pulp by means of a purpose-built laboratory pressure screen and (ii) MFC-like materials obtained by refining and subsequent steps of high-pressure homogenization. Morphological properties were determined using flow cell based and microscopic techniques, showing a wide size distribution of the fibrillated materials produced. The thus obtained materials were applied in handsheet forming in blends of different proportions to evaluate their influence on paper properties. Already at low concentration all tested products lead to a substantial decrease in air permeability and to improved mechanical properties, independent of the type and morphological character of the added fine cellulosic material. At higher addition rates, only highly fibrillated materials allowed a further considerable increase in tensile strength, which could be explained by the creation of a secondary network structure of highly fibrillated materials improving the load-bearing capacity of the whole paper structure.",
keywords = "microfibrillated cellulose, pulp fines",
author = "Julie Bossu and Czibula, {Chiara Valentina} and Armin Winter and Wolfgang Gindl-Altmutter and Rene Eckhart and Armin Zankel and Wolfgang Bauer",
year = "2019",
month = "5",
language = "English",
pages = "247--259",
booktitle = "Proceedings of the International Paper Physics Conference 2019",
publisher = "Tappi Press",

}

TY - GEN

T1 - Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties

AU - Bossu, Julie

AU - Czibula, Chiara Valentina

AU - Winter, Armin

AU - Gindl-Altmutter, Wolfgang

AU - Eckhart, Rene

AU - Zankel, Armin

AU - Bauer, Wolfgang

PY - 2019/5

Y1 - 2019/5

N2 - Recently fine cellulosic materials such as microfibrillated celluloses (MFCs) have become an interesting additive in papermaking, improving paper mechanical properties thanks to their intrinsic high mechanical strength along with high potential to interact with cellulosic fibres. In this study, we produced and compared: (i) a mixture of primary and secondary fines isolated from the pulp by means of a purpose-built laboratory pressure screen and (ii) MFC-like materials obtained by refining and subsequent steps of high-pressure homogenization. Morphological properties were determined using flow cell based and microscopic techniques, showing a wide size distribution of the fibrillated materials produced. The thus obtained materials were applied in handsheet forming in blends of different proportions to evaluate their influence on paper properties. Already at low concentration all tested products lead to a substantial decrease in air permeability and to improved mechanical properties, independent of the type and morphological character of the added fine cellulosic material. At higher addition rates, only highly fibrillated materials allowed a further considerable increase in tensile strength, which could be explained by the creation of a secondary network structure of highly fibrillated materials improving the load-bearing capacity of the whole paper structure.

AB - Recently fine cellulosic materials such as microfibrillated celluloses (MFCs) have become an interesting additive in papermaking, improving paper mechanical properties thanks to their intrinsic high mechanical strength along with high potential to interact with cellulosic fibres. In this study, we produced and compared: (i) a mixture of primary and secondary fines isolated from the pulp by means of a purpose-built laboratory pressure screen and (ii) MFC-like materials obtained by refining and subsequent steps of high-pressure homogenization. Morphological properties were determined using flow cell based and microscopic techniques, showing a wide size distribution of the fibrillated materials produced. The thus obtained materials were applied in handsheet forming in blends of different proportions to evaluate their influence on paper properties. Already at low concentration all tested products lead to a substantial decrease in air permeability and to improved mechanical properties, independent of the type and morphological character of the added fine cellulosic material. At higher addition rates, only highly fibrillated materials allowed a further considerable increase in tensile strength, which could be explained by the creation of a secondary network structure of highly fibrillated materials improving the load-bearing capacity of the whole paper structure.

KW - microfibrillated cellulose

KW - pulp fines

M3 - Conference contribution

SP - 247

EP - 259

BT - Proceedings of the International Paper Physics Conference 2019

PB - Tappi Press

ER -