Colorimetric method for the determination of fluoride emission rates in polymer electrolyte fuel cells

Kurt Mayer, Mathias Heidinger*, Joel Mata Edjokola, Merit Bodner, Viktor Hacker, Daniel Sandu

*Corresponding author for this work

Research output: Contribution to conferenceAbstractpeer-review


The chemical degradation of the membrane leads to the premature end of the life of polymer electrolyte fuel cells (PEFCs). Hydrogen peroxide is a promoter of ionomer degradation, which can occur at the anode side and cathode side at lower or higher current densities, respectively [1,2,3,4,5]. Free radicals of hydrogen peroxide attack the side chains and the backbone of Nafion®, which leads to fluoride and fluorine emissions into the effluent water. Impurities in reactant gases are another source of chemical degradation of the membrane [6, 7]. Accurate determination of the fluorine emission rates indicates how much ionomer has been degraded.

A PEFC with an electrode area of 25 cm² was subjected to a JRC stress test [8]. After a certain number of cycles, comprehensive electrochemical characterizations were performed and effluent water samples were taken. Polarization curves and electrochemical impedance spectra were recorded to investigate the performance losses as well as the changes due to membrane degradation. In addition, linear sweep voltammetry measurements were performed to investigate the hydrogen cross-over current and the thinning of the membrane.

The effluent water was analyzed using a UV-vis spectrometer developed by AiDEXA GmbH. Zr(IV)-SPADNS2 [9] was added to the water samples and the absorption spectra were recorded which was used to determine the fluorine concentration. The results were correlated with the electrochemical measurements to obtain information on the power loss to a given amount of degraded membrane. These results can be used for lifetime estimates.

This research is performed under the projects B.GASUS (FFG grant number 884368) and HyLife (K-Project HyTechonomy, FFG grant number 882510), which are supported by the Austrian Research Promotion Agency (FFG).

1. P. Frühwirt, A. Kregar, J. T. Törring, T. Katrašnik, G. Gescheidt, Physical Chemistry Chemical Physics 22(10) (2020) 5647 (
2. A. Kregar, G. Tavčar, A. Kravos, T. Katrašnik, Applied Energy 263 (2020) 114547 (
3. M. Bodner, C. Hohenauer, V. Hacker, Journal of Power Sources 295 (2015) 336 (
4. M. Bodner, A. Schenk, D. Salaberger, M. Rami, C. Hohenauer, V. Hacker, Fuel Cells 17(1) (2017) 18
5. EERE, Multiyear Research, Development, and Demonstration Plan 3.4 (2017) 46
6. B. Shabani, M. Hafttananian, Sh. Khamani, A. Ramiar, A.A. Ranjbar, Journal of Power Sources 427 (2019) 21
7. X. Cheng, Z. Shi, N. Glass, L. Zhang, J. Zhang, D. Song, Z.-S. Liu, H. Wang, J. Shen, Journal of Power Sources 165(2) (2007) 739 (
8. G. Tsotridis, A. Pilenga, G. Marco, T. Malkow, EU Harmonised Test Protocols for PEMFC MEA Testing in Single Cell Configuration for Automotive Applications (2015) (DOI 10.2790/54653)
9. R.M. Patel, K.S. Patel, M. L. Naik, International Journal of EnvironmentalStudies 56(5) 745
Original languageEnglish
Publication statusPublished - 11 Jul 2022
Event8th Regional Symposium on Electrochemistry of South-East Europe and 9th Kurt Schwabe Symposium: RSE-SEE 2022 - TU Graz, Graz, Austria
Duration: 11 Jul 202215 Jul 2022
Conference number: 8


Conference8th Regional Symposium on Electrochemistry of South-East Europe and 9th Kurt Schwabe Symposium
Abbreviated titleRSE-SEE 2022

Fields of Expertise

  • Mobility & Production


Dive into the research topics of 'Colorimetric method for the determination of fluoride emission rates in polymer electrolyte fuel cells'. Together they form a unique fingerprint.

Cite this