Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method

M. Wiltsche, W. Bauer, M. Donoser

Research output: Contribution to conferencePaperResearchpeer-review

Abstract

After an introduction to related research in the field of spatial coating layer formation, a new analysis method, based on a fully automated microtomy process and light microscopy combined with advanced image analysis algorithms, is presented. The concept offers both, a high spatial resolution and a significantly larger sample size than conventional SEM techniques. The concept is based on a light microscope which is attached to a rotary microtome. An embedded paper sample is digitized by means of serial sectioning. Repeatedly, slices are cut off the embedded paper sample and the cut block surface is scanned fully automated. Image analysis software was developed to automatically detect the coating layer. Segmentation of the coating layer is realized by a 3D color segmentation process in the RGB color space instead of a threshold based algorithm. The approach itself is a three-dimensional concept, meaning that for the detection of the coating layer in one slice image also data from the neighboring slices is incorporated. Thus, the algorithm delivers both, detailed and robust coating layer recognition. Single coated LWC papers from a pilot coater were analyzed to compare coating layer formation for blade and curtain coating. Local correlation was used to study the relation between the obtained thickness and topography values of the base paper and the coating layers for both coating methods. The results showed, as expected, in tendency a leveling coat behavior for blade coating and a contour coat behavior for curtain coating. However, especially the curtain coated sample, but also the blade coated sample, was away from the idealized characteristics of a contour or a leveling coat respectively. Studies regarding the effect of calendering on these samples showed that calendering predominantly influences the base sheet topography under the coating layer with a less pronounced effect on the coating layer thickness.

Original languageEnglish
Pages393-405
Number of pages13
Publication statusPublished - 7 Jul 2006
Event2006 TAPPI Advanced Coating Fundamentals Symposium - Turku, Finland
Duration: 8 Feb 200610 Feb 2006

Conference

Conference2006 TAPPI Advanced Coating Fundamentals Symposium
CountryFinland
CityTurku
Period8/02/0610/02/06

Fingerprint

Calendering
Coatings
Topography
Image analysis
Color
Optical microscopy

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Wiltsche, M., Bauer, W., & Donoser, M. (2006). Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method. 393-405. Paper presented at 2006 TAPPI Advanced Coating Fundamentals Symposium, Turku, Finland.

Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method. / Wiltsche, M.; Bauer, W.; Donoser, M.

2006. 393-405 Paper presented at 2006 TAPPI Advanced Coating Fundamentals Symposium, Turku, Finland.

Research output: Contribution to conferencePaperResearchpeer-review

Wiltsche, M, Bauer, W & Donoser, M 2006, 'Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method' Paper presented at 2006 TAPPI Advanced Coating Fundamentals Symposium, Turku, Finland, 8/02/06 - 10/02/06, pp. 393-405.
Wiltsche M, Bauer W, Donoser M. Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method. 2006. Paper presented at 2006 TAPPI Advanced Coating Fundamentals Symposium, Turku, Finland.
Wiltsche, M. ; Bauer, W. ; Donoser, M. / Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method. Paper presented at 2006 TAPPI Advanced Coating Fundamentals Symposium, Turku, Finland.13 p.
@conference{c6a089c04f7648369355ee8df51941d8,
title = "Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method",
abstract = "After an introduction to related research in the field of spatial coating layer formation, a new analysis method, based on a fully automated microtomy process and light microscopy combined with advanced image analysis algorithms, is presented. The concept offers both, a high spatial resolution and a significantly larger sample size than conventional SEM techniques. The concept is based on a light microscope which is attached to a rotary microtome. An embedded paper sample is digitized by means of serial sectioning. Repeatedly, slices are cut off the embedded paper sample and the cut block surface is scanned fully automated. Image analysis software was developed to automatically detect the coating layer. Segmentation of the coating layer is realized by a 3D color segmentation process in the RGB color space instead of a threshold based algorithm. The approach itself is a three-dimensional concept, meaning that for the detection of the coating layer in one slice image also data from the neighboring slices is incorporated. Thus, the algorithm delivers both, detailed and robust coating layer recognition. Single coated LWC papers from a pilot coater were analyzed to compare coating layer formation for blade and curtain coating. Local correlation was used to study the relation between the obtained thickness and topography values of the base paper and the coating layers for both coating methods. The results showed, as expected, in tendency a leveling coat behavior for blade coating and a contour coat behavior for curtain coating. However, especially the curtain coated sample, but also the blade coated sample, was away from the idealized characteristics of a contour or a leveling coat respectively. Studies regarding the effect of calendering on these samples showed that calendering predominantly influences the base sheet topography under the coating layer with a less pronounced effect on the coating layer thickness.",
author = "M. Wiltsche and W. Bauer and M. Donoser",
year = "2006",
month = "7",
day = "7",
language = "English",
pages = "393--405",
note = "2006 TAPPI Advanced Coating Fundamentals Symposium ; Conference date: 08-02-2006 Through 10-02-2006",

}

TY - CONF

T1 - Coating application method and calendering influence on the spatial coating layer formation obtained by an automated serical sectioning method

AU - Wiltsche, M.

AU - Bauer, W.

AU - Donoser, M.

PY - 2006/7/7

Y1 - 2006/7/7

N2 - After an introduction to related research in the field of spatial coating layer formation, a new analysis method, based on a fully automated microtomy process and light microscopy combined with advanced image analysis algorithms, is presented. The concept offers both, a high spatial resolution and a significantly larger sample size than conventional SEM techniques. The concept is based on a light microscope which is attached to a rotary microtome. An embedded paper sample is digitized by means of serial sectioning. Repeatedly, slices are cut off the embedded paper sample and the cut block surface is scanned fully automated. Image analysis software was developed to automatically detect the coating layer. Segmentation of the coating layer is realized by a 3D color segmentation process in the RGB color space instead of a threshold based algorithm. The approach itself is a three-dimensional concept, meaning that for the detection of the coating layer in one slice image also data from the neighboring slices is incorporated. Thus, the algorithm delivers both, detailed and robust coating layer recognition. Single coated LWC papers from a pilot coater were analyzed to compare coating layer formation for blade and curtain coating. Local correlation was used to study the relation between the obtained thickness and topography values of the base paper and the coating layers for both coating methods. The results showed, as expected, in tendency a leveling coat behavior for blade coating and a contour coat behavior for curtain coating. However, especially the curtain coated sample, but also the blade coated sample, was away from the idealized characteristics of a contour or a leveling coat respectively. Studies regarding the effect of calendering on these samples showed that calendering predominantly influences the base sheet topography under the coating layer with a less pronounced effect on the coating layer thickness.

AB - After an introduction to related research in the field of spatial coating layer formation, a new analysis method, based on a fully automated microtomy process and light microscopy combined with advanced image analysis algorithms, is presented. The concept offers both, a high spatial resolution and a significantly larger sample size than conventional SEM techniques. The concept is based on a light microscope which is attached to a rotary microtome. An embedded paper sample is digitized by means of serial sectioning. Repeatedly, slices are cut off the embedded paper sample and the cut block surface is scanned fully automated. Image analysis software was developed to automatically detect the coating layer. Segmentation of the coating layer is realized by a 3D color segmentation process in the RGB color space instead of a threshold based algorithm. The approach itself is a three-dimensional concept, meaning that for the detection of the coating layer in one slice image also data from the neighboring slices is incorporated. Thus, the algorithm delivers both, detailed and robust coating layer recognition. Single coated LWC papers from a pilot coater were analyzed to compare coating layer formation for blade and curtain coating. Local correlation was used to study the relation between the obtained thickness and topography values of the base paper and the coating layers for both coating methods. The results showed, as expected, in tendency a leveling coat behavior for blade coating and a contour coat behavior for curtain coating. However, especially the curtain coated sample, but also the blade coated sample, was away from the idealized characteristics of a contour or a leveling coat respectively. Studies regarding the effect of calendering on these samples showed that calendering predominantly influences the base sheet topography under the coating layer with a less pronounced effect on the coating layer thickness.

UR - http://www.scopus.com/inward/record.url?scp=33745583476&partnerID=8YFLogxK

M3 - Paper

SP - 393

EP - 405

ER -