Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification

Jürgen Schiffer-Rosenberger, Helmut Benigni, Helmut Jaberg

Research output: Contribution to conferencePaperResearchpeer-review

Abstract

Due to the growing exploitation of the worldwide small-scale hydro power potential high specific speed hydraulic turbines – typically used for combinations of rather high flow rate and low head - are gaining increasing importance. An unfavourable characteristic of such turbines is their high susceptibility to cavitation.
The subject of the investigations presented in this paper is a horizontal axis Kaplan pit-type turbine with three runner blades and a specific speed of nq = 263.5 rpm. Using a commercial software package steady-state and unsteady simulation methods were tested in a preliminary study in order to define the most promising approach for a reliable efficiency prediction. In the next step a statistical evaluation of the pressure distribution on the runner blades was performed. By using the so-called “Histogram-Method” the Thoma number  was calculated for various operation points of the turbine. The results gave a first impression of the expected cavitation performance. Additionally two-phase simulations were performed to determine the extent of cavitation and its impact on the turbine performance. Furthermore measurement results obtained from an experimental investigation on a model test rig served as basis for the evaluation of the results achieved by means of Computational Fluid Dynamics (CFD). In course of the measurement campaign the efficiency alteration due to the onset of cavitation was measured and recorded and pictures and videos were taken to capture the cavitation conditions.
It turned out that the location of the cavitation zones in the CFD simulation agrees well with the observations made in course of the model test. Even the influence of cavitation on the efficiency can be calculated with satisfying accuracy. The only downside is that the numerical simulation predicts the incipient cavitation at much lower pressure values than experimentally observed.
LanguageGerman
StatusPublished - 4 Sep 2018
Event2018 Conference on Modelling Fluid Flow - Hotel Gellert, Budapest, Hungary
Duration: 4 Sep 20187 Sep 2018

Conference

Conference2018 Conference on Modelling Fluid Flow
Abbreviated titleCMFF 18
CountryHungary
CityBudapest
Period4/09/187/09/18

Fields of Expertise

  • Sustainable Systems

Cite this

Schiffer-Rosenberger, J., Benigni, H., & Jaberg, H. (2018). Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification. Paper presented at 2018 Conference on Modelling Fluid Flow , Budapest, Hungary.

Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification. / Schiffer-Rosenberger, Jürgen; Benigni, Helmut; Jaberg, Helmut.

2018. Paper presented at 2018 Conference on Modelling Fluid Flow , Budapest, Hungary.

Research output: Contribution to conferencePaperResearchpeer-review

Schiffer-Rosenberger J, Benigni H, Jaberg H. Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification. 2018. Paper presented at 2018 Conference on Modelling Fluid Flow , Budapest, Hungary.
Schiffer-Rosenberger, Jürgen ; Benigni, Helmut ; Jaberg, Helmut. / Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification. Paper presented at 2018 Conference on Modelling Fluid Flow , Budapest, Hungary.
@conference{051784610f234044ba6dd2b9d3485294,
title = "Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification",
abstract = "Due to the growing exploitation of the worldwide small-scale hydro power potential high specific speed hydraulic turbines – typically used for combinations of rather high flow rate and low head - are gaining increasing importance. An unfavourable characteristic of such turbines is their high susceptibility to cavitation.The subject of the investigations presented in this paper is a horizontal axis Kaplan pit-type turbine with three runner blades and a specific speed of nq = 263.5 rpm. Using a commercial software package steady-state and unsteady simulation methods were tested in a preliminary study in order to define the most promising approach for a reliable efficiency prediction. In the next step a statistical evaluation of the pressure distribution on the runner blades was performed. By using the so-called “Histogram-Method” the Thoma number  was calculated for various operation points of the turbine. The results gave a first impression of the expected cavitation performance. Additionally two-phase simulations were performed to determine the extent of cavitation and its impact on the turbine performance. Furthermore measurement results obtained from an experimental investigation on a model test rig served as basis for the evaluation of the results achieved by means of Computational Fluid Dynamics (CFD). In course of the measurement campaign the efficiency alteration due to the onset of cavitation was measured and recorded and pictures and videos were taken to capture the cavitation conditions.It turned out that the location of the cavitation zones in the CFD simulation agrees well with the observations made in course of the model test. Even the influence of cavitation on the efficiency can be calculated with satisfying accuracy. The only downside is that the numerical simulation predicts the incipient cavitation at much lower pressure values than experimentally observed.",
author = "J{\"u}rgen Schiffer-Rosenberger and Helmut Benigni and Helmut Jaberg",
year = "2018",
month = "9",
day = "4",
language = "deutsch",
note = "2018 Conference on Modelling Fluid Flow , CMFF 18 ; Conference date: 04-09-2018 Through 07-09-2018",

}

TY - CONF

T1 - Cavitation in a high specific speed Kaplan pit-type turbine – Two-phase CFD-simulations and experimental verification

AU - Schiffer-Rosenberger, Jürgen

AU - Benigni, Helmut

AU - Jaberg, Helmut

PY - 2018/9/4

Y1 - 2018/9/4

N2 - Due to the growing exploitation of the worldwide small-scale hydro power potential high specific speed hydraulic turbines – typically used for combinations of rather high flow rate and low head - are gaining increasing importance. An unfavourable characteristic of such turbines is their high susceptibility to cavitation.The subject of the investigations presented in this paper is a horizontal axis Kaplan pit-type turbine with three runner blades and a specific speed of nq = 263.5 rpm. Using a commercial software package steady-state and unsteady simulation methods were tested in a preliminary study in order to define the most promising approach for a reliable efficiency prediction. In the next step a statistical evaluation of the pressure distribution on the runner blades was performed. By using the so-called “Histogram-Method” the Thoma number  was calculated for various operation points of the turbine. The results gave a first impression of the expected cavitation performance. Additionally two-phase simulations were performed to determine the extent of cavitation and its impact on the turbine performance. Furthermore measurement results obtained from an experimental investigation on a model test rig served as basis for the evaluation of the results achieved by means of Computational Fluid Dynamics (CFD). In course of the measurement campaign the efficiency alteration due to the onset of cavitation was measured and recorded and pictures and videos were taken to capture the cavitation conditions.It turned out that the location of the cavitation zones in the CFD simulation agrees well with the observations made in course of the model test. Even the influence of cavitation on the efficiency can be calculated with satisfying accuracy. The only downside is that the numerical simulation predicts the incipient cavitation at much lower pressure values than experimentally observed.

AB - Due to the growing exploitation of the worldwide small-scale hydro power potential high specific speed hydraulic turbines – typically used for combinations of rather high flow rate and low head - are gaining increasing importance. An unfavourable characteristic of such turbines is their high susceptibility to cavitation.The subject of the investigations presented in this paper is a horizontal axis Kaplan pit-type turbine with three runner blades and a specific speed of nq = 263.5 rpm. Using a commercial software package steady-state and unsteady simulation methods were tested in a preliminary study in order to define the most promising approach for a reliable efficiency prediction. In the next step a statistical evaluation of the pressure distribution on the runner blades was performed. By using the so-called “Histogram-Method” the Thoma number  was calculated for various operation points of the turbine. The results gave a first impression of the expected cavitation performance. Additionally two-phase simulations were performed to determine the extent of cavitation and its impact on the turbine performance. Furthermore measurement results obtained from an experimental investigation on a model test rig served as basis for the evaluation of the results achieved by means of Computational Fluid Dynamics (CFD). In course of the measurement campaign the efficiency alteration due to the onset of cavitation was measured and recorded and pictures and videos were taken to capture the cavitation conditions.It turned out that the location of the cavitation zones in the CFD simulation agrees well with the observations made in course of the model test. Even the influence of cavitation on the efficiency can be calculated with satisfying accuracy. The only downside is that the numerical simulation predicts the incipient cavitation at much lower pressure values than experimentally observed.

M3 - Paper

ER -