Find Research Outputs

Search results

• 3D Finite Element Modelling of Deep Foundations Employing an Embedded Pile Formulation

  Tschuchnigg, F., Dietzel, M. (ed.), Kieffer, D. S. (ed.), Marte, R. (ed.), Schubert, W. (ed.) & Schweiger, H. (ed.), 2013, 1 ed. . (Gruppe Geotechnik Graz)

  Research output: Book/Report › Book

• 3DHOG for Geometric Similarity Measurement and Retrieval for Digital Cultural Heritage Archives

  Eckeren, K. V., Tausch, R., Santos, P. & Fellner, W-D., 2015, International Congress on Digital Heritage - Theme 3 - Analysis And Interpretation. Institute of Electrical and Electronics Engineers, p. 210-213

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Image Reconstruction using Active Wavefront Sampling

  Heber, S., 2010

  Research output: Thesis › Master's Thesis

• 3D Imaging of Gap Plasmons in Vertically Coupled Nanoparticles by EELS Tomography

  Haberfehlner, G., Schmidt, F., Schaffernak, G., Hörl, A., Trügler, A., Hohenau, A., Hofer, F., Krenn, J., Hohenester, U. & Kothleitner, G., 2017, In : Nano Letters. 2017, 17, p. 6773-6777

  Research output: Contribution to journal › Article

• 3D Imaging of Material Properties by a Combination of Scanning Probe Microscope and an Ultramicrotome.

  Alekseev, A., Efimov, A. E., Matsko, N. & Loos, J., 2013, 3D Reconstruction: Methods, Applications and Challenges (Eds: Ashworth J., Brasher K). NOVA, New York.. 1 ed. ., p. pp-pp

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• 3D imaging of particle plasmon fields by electron energy-loss spectroscopic tomography

  Haberfehlner, G., Schmidt, F., Hörl, A., Orthacker, A., Trügler, A., Hohenester, U. & Kothleitner, G., 2015.

  Research output: Contribution to conference › Poster

• 3-dimensionale Verkehrsinfrastrukturplanung und Berücksichtigung von fahrdynamischen Aspekten und menschlichen Faktoren

  Seidel, M., Hoschopf, H., Kraut, M. & Tomasch, E., 31 May 2018

  Research output: Book/Report › Commissioned report

• 3 dimensional Fluorescence Microscopy applied to Paper Structure Analysis

  Schäffner, H., Kritzinger, J. & Bauer, W., 2010.

  Research output: Contribution to conference › Poster

• 3 Dimensional Fluorescence Microscopy applied to Paper Structure Analysis

  Schäffner, H., Kritzinger, J. & Bauer, W., 24 Nov 2010.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

• 3D Indoor Positioning with Pedestrian Dead Reckoning and Activity Recoginition Based on Bayes Filtering

  Moder, T., Hafner, P., Wisiol, K. & Wieser, M., 2014, Proceedings of the 5th International Conference on Indoor Positioning and Indoor Navigation. ., p. 1-4

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Indoor Positioning with Pedestrian Dead Reckoning and Activity Recognition Based on Bayes Filtering

  Hafner, P., Moder, T., Wisiol, K. & Wieser, M., 2014.

  Research output: Contribution to conference › Poster

• 3D Integration of MEMS and IC: Design, Technology and Simulations

  Taklo, M., Schjølberg-Henriksen, K., Lietaer, N., Prainsack, J., Elfving, A., Weber, J., Klein, M., Schneider, P. & Reitz, S., 2010, Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators. 1 ed. Springer Netherlands, Vol. 3. p. 191-203 (NATO Science for Peace and Security Series B: Physics and Biophysics).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• 3D-Laufradscan des Pumpenlaufrades und des Turbinenlaufrades des Pumpespeicherkraftwerk Malta Oberstufe: Datenaufbreitung, geometrische und hydraulische Analysen

  Leithner, S., Guggenberger, M., Benigni, H. & Jaberg, H., 31 Oct 2017

  Research output: Book/Report › Commissioned report

• 3D-Laufradscan und Schall-/ Schwingungsmessung Kraftwerk Hallermühle

  Guggenberger, M., Leithner, S. & Jaberg, H., 7 Aug 2017, 18 p.

  Research output: Book/Report › Commissioned report

• 3D Localization in Urban Environments from Single Images

  Armagan, A., Hirzer, M., Roth, P. M. & Lepetit, V., 2017, Proceedings of the OAGM/AAPR & ARW Joint Workshop (OAGM/AAPR & ARW).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Information use
  • Image segmentation
  • Accelerometers
  • Learning systems
  • Global positioning system

• 3D-mapping from TerraSAR-X staring spotlight data

  Gutjahr, K., Perko, R., Raggam, J. & Schardt, M., 2015, IEEE International Geosciences and Remote Sensing Symposium. Milano, Italy, p. 1817-1820

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Mass Digitization: A Milestone for Archeological Documentation

  Santos, P., Ritz, M., Fuhrmann, C. & Fellner, D. W., 2017, In : Virtual Archaeology Review . 8, 16, p. 1-11 11 p.

  Research output: Contribution to journal › Article

• 3D Mass Digitization and Management of Cultural Heritage Artifacts

  Schröttner, M., Ullrich, T., Santos, P. & Fellner, W-D., 2015, Unser digitales Gedächtnis. ., p. 1-7

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Massendigitalisierung - ein Meilenstein für die museale Nutzung

  Fuhrmann, C., Santos, P. & Fellner, W-D., 2015, In : Museumskunde. 80, p. 58-61

  Research output: Contribution to journal › Article

• 3D Meta Model Generation with Application in 3D Object Retrieval

  Getto, R., Merz, J., Kuijper, A. & Fellner, D. W., 2017, CGI 2017. Proceedings of the Computer Graphics International Conference. Association of Computing Machinery, p. 6 1 p. (ACM International Conference Proceedings Series (ICPS); 1368).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Micropatterned Surface Inspired by Salvinia molesta via Direct Laser Lithography

  Tricinci, O., Terencio, T., Mazzolai, B., Pugno, N. M., Greco, F. & Mattoli, V., 25 Nov 2015, In : ACS Applied Materials and Interfaces. 7, 46, p. 25560-25567 8 p.

  Research output: Contribution to journal › Article

  Open Access

  • Lithography
  • Lasers
  • Water
  • Microfabrication
  • Biomimetics

• 3D Modeling in a Web Browser to Formulate Content-Based 3D Queries.

  Berndt, R., Havemann, S. & Fellner, W-D., 2010, In : Selected readings in computer graphics. 2009, p. 357-366

  Research output: Contribution to journal › Article

• 3D Modelling of Flash Formation in Linear Friction Welded 30CrNiMo8 Steel Chain

  Effertz, P., Fuchs, F. & Enzinger, N., 21 Oct 2017, In : Metals. 7, 10, 12 p.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Friction welding
  • Steel
  • Friction
  • Welding
  • Flash welding

• 3D Model Representations and Transformations in the Context of Computer-Aided Design: a State-of-the-Art Overview

  Schinko, C., Krispel, U., Eggeling, E. & Ullrich, T., 2017, Proceedings of the International Conference on Advances in Multimedia. p. 10-15 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Nanoprinting of Functional and Freestanding Structures via Electron Beams: an Application Perspective

  Winkler, R., Sattelkow, J., Plank, H., Fowlkes, J. D. & Rack, P., 2018, Program Guide. p. 52

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Nanoprinting of Functional and Freestanding Structures via Electron Beams: an Application Perspective

  Winkler, R., Sattelkow, J., Schmidt, F., Haselmann, U., Fowlkes, J. D., Rack, P. & Plank, H., 2018, Program & Abstract Book. p. 9

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Nanoprinting via FEBID-from Growth Fundamentals to Applications

  Winkler, R., Sattelkow, J., Fowlkes, J. D., Rack, P. & Plank, H., 2018, Book of Abstracts. p. 50-51

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Nano-Printing via Focused Electron Beams:From a Concept Towards Stable Nano-Fabrication

  Winkler, R., Sattelkow, J., Fowlkes, J. D., Lewis, B. B., Rack, P. & Plank, H., 2017, EUFN 2017. p. 82-83

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Nanoprinting Via Laser-Assisted Electron Beam Induced Deposition: Growth Kinetics, Enhanced Purity and Electrical Resistivity

  Lewis, B. B., Winkler, R., Sang, X., Pudasaini, P., Stanford, M., Plank, H., Unocic, R., Fowlkes, J. D. & Rack, P., 2017, In : Beilstein Journal of Nanotechnology . 8, p. 801-812

  Research output: Contribution to journal › Article

  Open Access

• 3D numerical stability analysis of a power plant cavern

  Steiger, R., Henzinger, M. R. & Schubert, W., 18 Apr 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Universität Innsbruck, Arbeitsbereich für Festigkeitslehre und Baustatik, p. 115-122

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-numerische Strömungssimulation von hydraulischen Rückstromdrosseln in Wasserschlössern

  Richter, W., 2010

  Research output: Thesis › Diploma Thesis

  Open Access

  File

• 3D Object Classification and Parameter Estimation based on Parametric Procedural Models

  Getto, R., Kenten, F., Jarms, L., Kuijper, A. & Fellner, D., 2018, 26. International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision, WSCG 2018: Full Papers Proceedings. Skala, V. (ed.). University of West Bohemia, 10 p. (Computer Science Research Notes ; vol. 2801).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Parameter estimation
  • Neural networks

• 3D PixMix: Image-Inpainting in 3D Environments

  Mori, S., Herling, J., Broll, W., Kawai, N., Saito, H., Schmalstieg, D. & Kalkofen, D., 2018, Adjunct Proceedings of the IEEE International Symposium for Mixed and Augmented Reality 2018.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Pleiades Mapping for IPCC Reporting

  Schmitt, U., Hirschmugl, M., Perko, R., Schardt, M., Wang, J., Chew, P. T., Xue, C. & Ibrahim, H., Oct 2018, Proceedings of 2nd Conference on Mapping Urban Areas from Space. Frascati, Italy, 2

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Pose Estimation and 3D Model Retrieval for Objects in the Wild

  Grabner, A., Roth, P. M. & Lepetit, V., 2018, Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition. 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

  • Geometry

• 3D printing of oral drugs: a new reality or hype?

  Hsiao, W. K., Lorber, B., Reitsamer, H. & Khinast, J., 2 Jan 2018, In : Expert opinion on drug delivery. 15, 1, p. 1-4 4 p.

  Research output: Contribution to journal › Editorial

• 3D Progressive Education Environment for S-BPM

  Weichhart, G., Pirker, J., Gütl, C. & Stary, C., 2014, S-BPM ONE - Application Studies and Work in Progress. Springer, Vol. 422. p. 188-197 (Communications in Computer and Information Science).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Reconstruction from Line Drawings

  Wendt, L., Stork, A., Kuijper, A. & Fellner, W-D., 2010, VISIGRAPP 2010. Proceedings; International Conference on Computer Graphics Theory and Applications (GRAPP). ., p. 65-71

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-reconstruction of cracks in polymer blends

  Nachtnebel, M., Mayrhofer, C. & Pölt, P., 23 Aug 2015.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

• 3D-RECONSTRUCTION OF CRACKS IN POLYMER BLENDS

  Nachtnebel, M., Mayrhofer, C. & Pölt, P., 2015, Multinational Congress on Microscopy. ., p. O-216-34-35

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-Reconstruction of cracks in polymers – New insight in the fracture behaviour?

  Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2017, Deformation and Fracture Behaviour of Polymer Materials. 1 ed. Springer International Publishing AG , (Springer Series in Materials Science; vol. 247).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• 3D-reconstruction of cracks in polymers - New insight into the fracture behaviour?

  Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2014, Internationale Wissenschaftliche Tagung Polymerwerkstoffe. ., p. 216-220

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D–reconstruction of cracks in polymers – New insight into the fracture behaviour?

  Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 25 Jun 2014.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

• 3D-reconstructions of a neuronal Motion Detecting Sensor with Serial block Face Scanning Electron Microscopy (SBEM)

  Hobusch, U., Wernitznig, S., Gütl, D., Zankel, A., Pölt, P., Rind, F. C. & Leitinger, G., 2015, ASEM Workshop Advanced Electron Microscopy. ., p. 26-26

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Scene Flow Estimation with a Piecewise Rigid Scene Model

  Vogel, C., Schindler, K. & Roth, S., 2015, In : International Journal of Computer Vision.

  Research output: Contribution to journal › Article

  File

• 3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V

  Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 13 Jun 2013.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

  Open Access

  File

• 3D Simulation and Process Optimization of Laser Assisted Milling of Ti6Al4V

  Zamani, H. A., Hermani, J-P., sonderegger, B. & Sommitsch, C., 2013, Procedia CIRP. Volume 8, Vol. Volume 8. p. 75-80 (Procedia CIRP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• 3D simulation of hydrogen ignition in a rapid compression machine

  Frolov, S. M., Emans, M., Ivanov, V. S., Basara, B., Leshevich, V. V. & Penyazkov, O. G., 2013, In : Journal of loss prevention in the process industries. 26, 6, p. 1558-1568

  Research output: Contribution to journal › Article

• 3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

  Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 22 Apr 2013.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

  Open Access

  File

• 3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

  Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In : Key Engineering Materials . 554-557, p. 2054-2061

  Research output: Contribution to journal › Article

  Open Access

  File