Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

A Meshless Method for Axisymmetric Problems in Continuously Nonhomogeneous Saturated Porous Media

Sladek, J., Sladek, V. & Schanz, M., 2014, In : Computers and Geotechnics. 62, p. 100-109

Research output: Contribution to journalArticle

A method capable to determine damage of the outer fibre wall layers

Eckhart, R., Hirn, U. & Bauer, W., 2011, Fine Structure of Papermaking Fibers. 1 ed. Uppsala (Sweden): COST Office, p. 115-124

Research output: Chapter in Book/Report/Conference proceedingChapter

A method for ab initio flight training in a network of simulators

Braunstingl, R., Koglbauer, I. V., Riesel, M., Haberkorn, T. & Schadler, M., 7 May 2015.

Research output: Contribution to conference(Old data) Lecture or Presentation

A method for charactering EMI coupling paths and source properties in complex systems

Shishuang, S., Gang, F., Chong, D., Pommerenke, D. J. & Drewniak, J. L., 1 Dec 2006, 2006 IEEE International Symposium on Electromagnetic Compatibility, EMC 2006. p. 114-118 5 p. 1706275. (IEEE International Symposium on Electromagnetic Compatibility; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Method for Dynamic Allocation of Tasks in Clusters of Embedded Smart Cameras

Bramberger, M., Rinner, B. & Schwabach, H., 2005, IEEE International Conference on Systems, Man, and Cybernetics. ., p. 2595-2600

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for electrically isolated voltage measurement in PWM inverters

Vorauer, M., Krischan, K. & Mütze, A., 2011, International Conference on Electrical Drives and Power Electronics. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2012.

Research output: Contribution to conferencePoster

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2011.

Research output: Contribution to conferencePoster

A method for emission estimation for microscopic traffic flow

Kraschl-Hirschmann, K., Zallinger, M. S., Luz, R., Fellendorf, M. & Hausberger, S., 29 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

A method for emission estimation for microscopic traffic flow simulation

Kraschl-Hirschmann, K., Zallinger, M. S., Luz, R., Fellendorf, M. & Hausberger, S., 2011, 2011 IEEE Forum on Integrated and Sustainable Transportation Systems - Proceedings. ., p. 300-305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for evaluating the navigability of recommendation algorithms

Lamprecht, D., Strohmaier, M. & Helic, D., 2017, In : Studies in Computational Intelligence. 693, p. 247-259 13 p.

Research output: Contribution to journalArticle

A method for external controlled parameterised automotive design at an initial development stage

Göber, T., Hirz, M. & Krammer, S., 2008, 2008 Encyclopaedia 'Simulation in Automotive Engineering - Best Practices of OEMs and Suppliers'. 1 ed. Graz: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingChapter

A Method for externally controlled parameterised Automotive Design at an initial Development Stage

Göber, T., Hirz, M. & Krammer, S., 2006, Proceedings / 2006 Conference Virtual Product Development (VPD) in Automotive Engineering. Graz: payerconsulting, p. 103-118

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Method for Fast Jitter Tolerance Analysis of High-Speed PLLs

Erb, S. & Pribyl, W., 2011, Design, Automation and Test in Europe. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

A Method for GC–Olfactometry Panel Training

Vene, K., Seisonen, S., Koppel, K., Leitner, E. & Paalme, T., 2013, In : Chemosensory perception. 6, 4, p. 179-189

Research output: Contribution to journalArticle

A method for improved 4D-computed tomography data acquisition

Kupper, M., Sprengel, W., Winkler, P. & Zurl, B., 2017, In : Zeitschrift für medizinische Physik. 27, 1, p. 31-38

Research output: Contribution to journalArticle

A method for incorporating residual stresses into finite element simulations with an application to abdominal aortic aneurysms

Fastl, T., Pierce, D., Weisbecker, H. & Holzapfel, G., 9 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or Presentation

A method for incorporating residual stresses into patient-specific finite element simulations of arteries with an example on AAAs

Pierce, D., Fastl, T., Weisbecker, H., Rodriguez-Vila, B., Gómez Aguilera, E. J. & Holzapfel, G., 10 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or Presentation

A method for incorporating three-dimensional residual stretches/stresses into patient-specific finite element simulations of arteries

Pierce, D., Fastl, T., Rodriguez-Vila, B., Verbrugghe, P., Fourneau, I., Maleux, G., Herijgers, P., Gómez Aguilera, E. J. & Holzapfel, G., 2015, In : Journal of the mechanical behavior of biomedical materials. 47, p. 147-164

Research output: Contribution to journalArticle

A method for measuring the electrical contact resistance during welding

Galler, M., Ernst, W. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or Presentation

Open Access
File

A method for mixed integer convex programming

Burkard, R., 1973, Proceedings of the 4th International Conference on Probability Theory (Brasov 1971). Bucharest: Editura Academiei Republicii Socialiste Romania, p. 497-504

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for preparation of thin corrosion layers of brass for TEM investigations

Hofer, F., 1987, In : Journal of microscopy. 145, p. 225-231

Research output: Contribution to journalArticle

A method for preparing extensible paper on the laboratory scale

Lahti, J., Schmied, F. & Bauer, W., 2014, In : Nordic Pulp & Paper Research journal. 2, p. 317-321

Research output: Contribution to journalArticle

A METHOD FOR QUANTITATIVE EVALUATION OF UNIVERSITY LECTURING

Scerbakov, N. & Scerbakov, A., 2015, 9. INTERNATIONAL QUALITY CONFERENCE. ., p. 375-381

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for reduction of computational time of local equilibria for biomass flue gas compositions in CFD

Braun, M., Kleditzsch, S., Scharler, R., Obernberger, I., Forstner, M., Joeller, M. & Hofmeister, G., 2006, In : Progress in computational fluid dynamics. 6, 4/5, p. 272-277

Research output: Contribution to journalArticle

A Method for Self-Organizing Communication in WSN Based Localization Systems: HashSlot

Baunach, M. C., Kolla, R. & Mühlberger, C., 2007, 32nd IEEE Conference on Local Computer Networks, LCN 2007. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A method for simulating spray pyrolysis deposition in the level set framework

Filipovic, L., Selberherr, S., Mutinati, G. C., Brunet, E., Steinhauer, S., Köck, A., Teva, J., Kraft, J., Siegert, J., Schrank, F., Gspan, C. & Grogger, W., 2013, In : Engineering letters. 21, 4, p. 224-240

Research output: Contribution to journalArticle

A method for the approximation of non-uniform fiber misalignment in textile composites using picture frame test

Milani, A. S., Nemes, J. A., Abeyaratne, R. C. & Holzapfel, G., 2007, In : Composites / A. 38, 6, p. 1493-1501

Research output: Contribution to journalArticle

A Method for the Determination of Turbulence Intensity b Means of a Fast Response Pressure Probe and its Application in a LP Turbine

Lengani, D., Paradiso, B. & Marn, A., 2011, Proceedings of the 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Method for the Determination of Turbulence Intensity b Means of a Fast Response Pressure Probe and its Application in a LP Turbine

Lengani, D., Paradiso, B. & Marn, A., 4 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

A methodical approach for thermal management simulation of hybrid powersport application

Schmidt, S., Rieger, P., Trattner, A., Kirchberger, R., Dutzler, C. & Heizinger, G., 2011, 17th Small Engine Technology Conference / Diversity of Small Powertrain Technologies. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A methodical approach for thermal management simulation of hybrid powersport application

Schmidt, S., Rieger, P., Trattner, A., Kirchberger, R., Dutzler, C. & Heizinger, G., 8 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

A Method of CAD based Automation and Simulation by the Example of Virtual Stone Chipping Investigation

Ernst, M., Hirz, M. & Stadler, S., 2014, In : Computer-aided design and applications. 11, 3, p. 295-304

Research output: Contribution to journalArticle

A Method of Finding the Solution of a Third-Order Partial Differential Equation

Tomantschger, K., 1985, In : Bulletins for Applied Mathematics. p. 100-105 6 p., 292/85.

Research output: Contribution to journalArticle

A Methodology-Driven Software Infrastructure for Work-Based Learning

Helic, D., 2004, Researching Technology for Tomorrow's Learning: Insights from the European Community. 1 ed. ., p. 85-95

Research output: Chapter in Book/Report/Conference proceedingChapter

A Methodology for Adaptive Competence Assessment and Learning Path Creation ISAC

Nussbaumer, A., Gütl, C. & Neuper, W., 2010, Proceedings of the International Conference on Interactive Computer-aided Learning (ICL 2010). Kassel: Kassel University Press, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Methodology for Adaptive Competence Assessment and Learning Path Creation ISAC

Nussbaumer, A., Gütl, C. & Neuper, W., 15 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or Presentation

A methodology for predictive maintenance in semiconductor manufacturing

Scheibelhofer, P., Gleispach, D., Hayderer, G. & Stadlober, E., 2012, In : Austrian Journal of Statistics. 41, 3, p. 161-173

Research output: Contribution to journalArticle

A methodology for the model-based real-time prediction of corrosion in heat exchangers

Holzer, G., Jeitler, E. & Wallek, T., 4 Apr 2018.

Research output: Contribution to conferencePoster

A Methodology to Analyze Interoperability in Crisis and Disaster Management

Neubauer, G., Preinerstorfer, A., Jager, B., Humer, H., Lichtenegger, G. C., Vorraber, W., Linke, H., Tusa, G., Grüner, R., Dalaff, C., Huebner, K., Knezic, S. & Blaha, M., 2015, IDMINT 2015, Information Technology and Society - Interaction and Interdependence. Linz: Trauner Verlag , Vol. 44. p. 23-30 (Schriftenreihe Informatik).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Methodology to Analyze Interoperability in Crisis and Disaster Management

Neubauer, G., Preinerstorfer, A., Jager, B., Humer, H., Lichtenegger, G. C., Vorraber, W., Linke, H., Tusa, G., Grüner, R., Dalaff, C., Huebner, K., Knezic, S. & Blaha, M., 2015.

Research output: Contribution to conference(Old data) Lecture or Presentation

A methodology to generate a time-varying adjustable wave impedance inside a TEM cell

Li, G., Prabhala, V. A. K., Saxena, A., Wang, Q., Maheshwari, P. & Pommerenke, D., 15 Sep 2014, In : IEEE International Symposium on Electromagnetic Compatibility. 2014-September, September, p. 894-898 5 p., 6899094.

Research output: Contribution to journalConference article

A Methodology to Simulate Piston Secondary Movement under Lubricated Contact Conditions

Offner, G., Herbst, H. & Priebsch, H-H., 2001, SAE TEchnical Paper series. Society of Automotive Engineers, p. 1-10 (Sae 2001 World Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

A methodology to study the morphologic changes in lesions during in vitro angioplasty using MRI and image processing

Auer, M., Regitnig, P., Stollberger, R., Ebner, F. & Holzapfel, G., 2008, In : Medical image analysis. 12, p. 163-173

Research output: Contribution to journalArticle

A Method to Determine Fiber Wall Damage Induced by Refining

Eckhart, R., Hirn, U. & Bauer, W., 2006, Progress in Paper Physics Seminar. ., p. 30-34

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

A method to determine the course of heating value and heat production rate of volatiles during the pyrolysis of a solid fuel particle

Steiner, G., Rath, J., Wolfinger, M. & Staudinger, G., 2003, In : Thermochimica acta. 398, 1-2, p. 59-71

Research output: Contribution to journalArticle

A method to determine the degree of weakening of the outer fiber wall layers by image analytical evaluation of forced fiber swelling

Eckhart, R., Hirn, U. & Bauer, W., 2007, COST Action E54; Characterisation of the fine structure and properties of papermaking fibers using new technologies; Opening Seminar. ., p. 59-63

Research output: Chapter in Book/Report/Conference proceedingConference contribution