Find Research Outputs

Search concepts
Selected filters
2007

Low-cost low-power test-bed for experimental investigation of common-mode chokes for high-power applications

Mütze, A. & Heng, B. S., 2007, 2007 IEEE International Electric Machines and Drives Conference. Institute of Electrical and Electronics Engineers, p. 1582-1586

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

A contribution to identification of convex structures for global optimization of permanent magnet machines

Mütze, A., 2005, Proceedings of the 40th IEEE IAS Annual Conference. ., p. 266-273

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Current-carrying characteristics of conductive microfiber rings for high frequencies and current amplitudes

Mütze, A. & Oh, H. W., 2008, Proceedings of the 43rd IEEE IAS Annual Conference. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePosterResearchpeer-review

2015

Influence of electric discharge activity on bearing lubricating grease degradation

Romanenko, A., Mütze, A. & Ahola, J., 2015, IEEE Energy Conversion Congress and Exposition. ., p. 4851-4856

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Simulation model of common-mode chokes for high-power applications

Sullivan, C. R. & Mütze, A., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 1810-1815

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Economic factors and incentives for ocean wave energy conversion

Vining, J. G. & Mütze, A., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 756-763

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Design of PM free brushless AC machine based actuators for elevated temperature environments

Lang, K., Muetze, A., Bauer, R. & Rossegger, W., 2015, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 696-702 7 p. 7409135

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2013, Proc. of the 8th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1289-1294

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. & Mütze, A., 2016, Applied Power Electronics Conference and Exposition. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Generation of high frequency common mode currents in machines of inverter-based drive systems

Mütze, A. & Binder, A., 2005, Proceedings of the 11th EPE, paper no. 492. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Analytic force calculation in brushless-DC motors II: mathematical details of the alternative approach

Starschich, E., Mütze, A. & Hameyer, K., 2009, Proceedings of the IEEE 6th IEMDC. ., p. 1208-1215

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Discussion of a new rocking buoy reaction based wave energy converter topology

Gemmell, R. & Mütze, A., 2010, XIX International Conference on Electrical Machines (ICEM). Piscataway, NJ: Institute of Electrical and Electronics Engineers, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Application of static charge dissipation to mitigate electric discharge bearing currents

Mütze, A. & Oh, H. W., 2007, Proceedings of the IEEE 5th IEMDC. ., p. 1059-1066

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design aspects of conductive microfiber rings for shaft grounding purposes

Mütze, A. & Oh, H. W., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 229-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Non-Linear Space-Dependency of Main and Differential Inductances of Permanent Magnet Electric Machines

Bacher, J. P. & Muetze, A., 19 Jun 2018, SPEEDAM 2018 – Proceedings. p. 286-291 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Kolbe, H. & Mütze, A., 2014.

Research output: Contribution to conferencePosterResearch

2015

Investigation of the influence of unwanted micro lenses caused by semiconductor processing excursions on optical behavior of CMOS photodiodes

Kraxner, A., Park, J. M. & Minixhofer, R., 2015, Physics and Simulation of Optoelectronic Devices XXIII. Vol. 23. (SPIE Proc.; vol. 9357).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Construction of normal numbers via generalized prime power sequences

Madritsch, M. & Tichy, R., 2013, In : Journal of Integer Sequences. 16, 2, p. 17 -30

Research output: Contribution to journalArticleResearchpeer-review

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Measure density for set decompositions and uniform distribution

Iaco, M. R., Pasteka, M. & Tichy, R., 2015, In : Rendiconti del Circolo Matematico di Palermo. 64, p. 323-339

Research output: Contribution to journalArticleResearchpeer-review

2014

Fast and Exact Plane Based Representation for Polygonal Meshes

Krispel, U., Ullrich, T. & Fellner, W-D., 2014, Proceedings of the International Conferences of CGVCVIP. IADIS Press, p. 189-196

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Compilation of procedural models

Ullrich, T., Krispel, U. & Fellner, W-D., 2008, Proceedings of the 13th International Symposium on 3D Web Technology (Web3D 2008). Association of Computing Machinery, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1997

Imaging and Profiling of p-Hexaphenyl Layers on Galliumarsenide

Reichmann, K., Koch, N., Meghdadi, F. & Leising, G., 1997, In : Journal of computer assisted microscopy. 9, 1, p. 278-279

Research output: Contribution to journalArticleResearchpeer-review

2009

Mixtures of Ionic Liquids in Combination with Graphite Electrodes: The Role of Li-salts

Lux, S., Schmuck, M., Rupp, B., Kern, W., Appetecchi, G., Passerini, S., Winter, M. & Balducci, A., 2009, In : ECS Transactions. 16, 35, p. 45-49

Research output: Contribution to journalArticleResearch

2014

The Potential of 3D Internet in the Cultural Heritage Domain

Santos, P., Peña Serna, S., Stork, A. & Fellner, W-D., 2014, 3D Research Challenges in Cultural Heritage. 1 ed. Berlin, Heidelberg, New York: Springer, p. 1-17

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Discovery and Visual Analysis of Linked Data for Humans

Sabol, V., Tschinkel, G., Veas, E., Hoefler, P., Mutlu, B. & Granitzer, M., 2014, The Semantic Web – ISWC 2014. Mika, P., Tudorache, T., Bernstein, A., Welty, C., Knoblock, C., Vrandecic, D., Groth, P., Noy, N., Janowicz, K. & Goble, C. (eds.). Springer, Vol. 8796. p. 309-324 (Lecture Notes in Computer Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Comparison between Finite Element and Hybrid Finite Element Results to Test Data for the Vibration of a Production Car Body

Vlahopoulos, N., Sander, D. E., Sungmin, L., Böhler, E. & Zhang, G., 13 Jun 2019.

Research output: Contribution to conferencePaperResearchpeer-review

2013

Grammar Checker Features for Author Identification and Author Profiling

Kern, R., 2013, CLEF 2013 Evaluation Labs and Workshop – Working Notes Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

CVD Polymer Surfaces for Biotechnology and Biomedicine

Coclite, A. M., 2015, CVD Polymers: Fabrication of Organic Surfaces and Devices. 1 ed. ., p. 301-318

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

A Special Section on Nanostructured Functional Polymers

Coclite, A. M., 2015, In : Nanoscience and nanotechnology letters. 7, p. 20-20

Research output: Contribution to journalArticleResearchpeer-review

2014

Who will Trade with Whom? Predicting Buyer-Seller Interactions in Online Trading Platforms through Social Networks

Trattner, C., Parra, D., Eberhard, L. & Wen, X., 2014, Proceedings of the 24nd international World Wide Web Conferences Steering Committee.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Applying a Web and Simulation-Based System for Adaptive Competence Assessment of Spinal Anaesthesia

Hockemeyer, C., Nussbaumer, A., Lövquist, E., Aboulafia, A., Brenn, D., Shorten, G. & Albert, D., 2009, In : Lecture notes in computer science. 5686, p. 182-191

Research output: Contribution to journalArticleResearchpeer-review

2011

Tracking the UFO's paths: Using Eye-Tracking for the Evaluation of Serious Games

Kickmeier-Rust, M., Hillemann, E-C. & Albert, D., 2011, HCI (13). ., p. 315-324

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technology-mediated Support for Self-regulated Learning in Open Responsive Learning Environments

Nussbaumer, A., Kirschenmann, U. & Albert, D., 2011, IEEE Conference on Education Engineering (EDUCON 2011). ., p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Adaptive Learning Using an integration of competence model with Knowledge Space Theory

Sitthisak, O., Gilbert, L. & Albert, D., 2013, Proceedings of the IIAI International Conference on Advanced Applied Informatics 2013. Matsuo, T. (ed.). p. 199-202

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Visualization of Learner's State and Learning Paths with Knowledge Structures

Nakamura, Y., Tsuji, H., Seta, K., Hashimoto, K. & Albert, D., 2011, Proceedings of the 15th International Conference on Knowledge-based and Intelligent Information and Engineering Systems - Volume Part IV. Berlin, Heidelberg: Springer Berlin - Heidelberg, p. 261-270 10 p. (Lecture Notes in Computer Science; vol. 6884).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Support Teachers' Predictions of Learning Success by Structural Competence Modelling

Kickmeier-Rust, M. & Albert, D., 2016, Proceedings of the Fourth International Workshop on Teaching Analytics, in conjunction with EC-TEL 2016. CEUR Workshop Proceedings, Vol. 1738. p. 35-39 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Heuristics for Generating and Validating Surmise Relations across, between and within Sets/Tests

Albert, D., Wesiak, G. & Ünlü, A., 2013, Knowledge Spaces: Application in Education. 1 ed. Berlin: Springer, p. 193-227

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2012

Educationally adaptive: Balancing serious games.

Kickmeier-Rust, M. & Albert, D., 2012, In : International Journal of Computer Science in Sport . 10, 1, p. 1-10

Research output: Contribution to journalArticleResearchpeer-review

1999

Oxide film formation on metals and alloys by thermal, electrochemical and plasma oxidation and prediction of resulting structures

Cocke, D. L., Promreuk, S., Schennach, R., Mollah, M. Y. A. & Naugle, D. G., 1999, Multicomponent oxide films for electronics. ., Vol. 574. p. 125-125 (MATERIAL RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1995

Evaluation of Surface Vibrations in the Low and High Frequency Domain.

Fischer, P., Pradlwarter, H. & Schueller, G. I., 1995, Proceedings of the 1995 ASME Design Engineering Technical Conferences. ., p. 1029-1036

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

GIS zur Berechnung des Bodenwasserhaushalts

Bartelme, N. & Schaumberger, A., 2013, In : Gis.Science. 26, 1, p. 26-34

Research output: Contribution to journalArticleResearch

2015

A Generic Friction Model for Radial Slider Bearing Simulation Considering Elastic and Plastic Deformation

Offner, G. & Knaus, O., 2015, In : Lubricants. 3, p. 522-538

Research output: Contribution to journalArticleResearchpeer-review

2016

Dynamic Substructuring for Sources Contributions Analysis in Internal Combustion Engines

Acri, A., Offner, G., Resch, T., Nijman, E. & Corradi, R., 2016.

Research output: Contribution to conferencePaperResearchpeer-review

2008

Inkjet printed polymer light emitting devices fabricated by thermal embedding of semiconducting polymer nanospheres in an inert matrix

Fisslthaler, E., Sax, S., Blümel, A., Scherf, U., Landfester, K. & List, E., 2008.

Research output: Contribution to conferencePosterResearch

2011

Investigation of a combined micro-forming and punching process for the realization of tight geometrical tolerances of conically formed hole patterns

Kolleck, R., Vollmer, R. & Veit, R., 2011, 61st CIRP General Assembly. ., p. 331-334

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Using Semantics for Interactive Visual Analysis of Linked Open Data

Tschinkel, G., Veas, E., Mutlu, B. & Sabol, V., 2014, ISWC 2014 Posters & Demonstrations Track. ., Vol. 1272. p. 133-136 (CEUR Workshop Proceedings (CEUR-WS.org)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Regulation of the yeast triacylglycerol lipase TGl3p by formation of nonpolar lipids.

Schmidt, C., Athenstaedt, K., Koch, B., Ploier, B. & Daum, G., 2013, In : The Journal of Biological Chemistry. 288, 7, p. 19939-19948

Research output: Contribution to journalArticleResearchpeer-review