Find Research Outputs

Ambient Intelligence in Assisted Living: Enable Elderly People to Handle Future Interfaces

Kleinberger, T., Becker, M., Ras, E., Holzinger, A. & Müller, P., 2007, Universal Access to Ambient Interaction. 1 ed. Berlin, Heidelberg, New York: Springer, Vol. 4555. p. 103-112 (Lecture notes in computer science (LNCS)).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Open Access
File

Ambient Intelligence in Assisted Living: Enable Elderly People to Handle Future Interfaces

Kleinberger, T., Becker, M., Ras, E., Müller, P. & Holzinger, A., 2007, Universal Access in Human-Computer Interaction. Ambient Interaction. Springer, p. 103-112 (Lecture Notes in Computer Science; vol. 4555).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ambiguity Fixing in real-timePPP - Determination of uncalibrated phase delays using a regional network

Hinterberger, F., Weber, R., Huber, K. & Lesjak, R., 2015, In : VGI - Österreichische Zeitschrift für Vermessung & Geoinformation. 2+3, p. 130-137

Research output: Contribution to journalArticleResearch

Ambiguity in the Evaluation of Thermophysical Data of Solid and Liquid Vanadium

Cagran, C., Wilthan, B. & Pottlacher, G., 6 Oct 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ambiguity in the Evaluation of Thermophysical Data of Solid and Liquid Vanadium

Cagran, C., Wilthan, B. & Pottlacher, G., 2004, (Submitted) In : International Journal of Thermophysics.

Research output: Contribution to journalArticleResearchpeer-review

Ambiguous pore plugging during geothermal reinjection: 3D-sandstone characterization and experimental simulations

Petschacher, N., Hippler, D., Böchzelt, B. & Dietzel, M., 2015.

Research output: Contribution to conferencePosterResearch

Ambiguous pore plugging during geothermal reinjection: 3D-sandstone characterization and experimental simulations.

Petschacher, N., Hippler, D., Böchzelt, B. & Dietzel, M., 2015, Ambiguous pore plugging during geothermal reinjection: 3D-sandstone characterization and experimental simulations.. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

AMBIGUOUS PORE PLUGGING DURING GEOTHERMAL REINJECTION – 3D-SANDSTONE CHARACTERIZATION AND EXPERIMENTAL SIMULATIONS

Petschacher, N., Hippler, D., Eder, M., Brunner, R., Böchzelt, B. & Dietzel, M., 2015, Österreichische Mineralogische Mitteilungen. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

AMBIGUOUS PORE PLUGGING DURING GEOTHERMAL REINJECTION – 3D-SANDSTONE CHARACTERIZATION AND EXPERIMENTAL SIMULATIONS

Petschacher, N., Hippler, D., Eder, M., Brunner, R., Böchzelt, B. & Dietzel, M., 2015.

Research output: Contribution to conferencePosterResearch

Ambulatory psychophysiological monitoring of pilots during flight

Koglbauer, I., Kallus, K. W., Boucsein, W. & Braunstingl, R., 25 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Measurement Device for the Comparative Evaluation of Proximal Teeth Contact Strengths

Deinhammer, C., Wallinger, C. F., Brandner, M., Buchgraber, B. & Städtler, P., 2011, (Accepted/In press) IEEE Instrumentation and Measurement Technology Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Measurement Example to Show the Relationship between the electromagnetic emission And The Ground bounce Voltage of an Integrated Circuit

Deutschmann, B., Ostermann, T., Bacher, C. & Jungreithmair, R., 2003, IEEE International Symposium on Design and Diagnostics of Electronic Circuits & Systems. ., p. 195-200

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Measurement Platform for Energy Harvesting and Software Characterization in WSNs

Glatz, P. M., Meyer, P., Janek, A., Trathnigg, T., Steger, C. & Weiß, R., 2009, IFIP Wireless Days - Ad Hoc and Sensor Networks. ., p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A measurement system and the TUG-EEC-Channels database for the aeronautical voice radio

Hofbauer, K., Hering, H. & Kubin, G., 2006, IEEE Vehicular Technology Conference. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

A mechanical approach to modeling the crack development and shear failure of reinforced concrete beams with low amounts of shear reinforcement

Nguyen, V. T. & Nguyen, D. T., 2018, Proceedings of the 5th International fib Congress of the International Federation for Structural Concrete. Melbourne, Australia, 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A mechanistic explanation of the inhibitory role of the protein corona on liposomal gene expression

Palchetti, S., Digiacomo, L., Giulimondi, F., Pozzi, D., Peruzzi, G., Ferri, G., Amenitsch, H., Cardarelli, F., Mahmoudi, M. & Caracciolo, G., 1 Mar 2020, In : Biochimica et Biophysica Acta - Biomembranes. 1862, 3, 183159.

Research output: Contribution to journalArticleResearchpeer-review

Gene expression
Liposomes
Gene Expression
DNA
Transfection

A mechanistic Study of Palladium as Anode Catalyst for Direct Borohydride Fuel Cells

Grimmer, C., Zacharias, R., Grandi, M. & Hacker, V., 2015.

Research output: Contribution to conferencePosterResearch

A Mechanistic Study of Photoinduced Electron Transfer from Triplet Erythrosin to Various Quinones Using Time Resolved Absorption and ESR-CIDEP Measurements

Landgraf, S., Grampp, G., Mansha, A., Asim, S. & Zahid, M., 2014, In : Zeitschrift für Physikalische Chemie. 228, 2-3, p. 301-324

Research output: Contribution to journalArticleResearchpeer-review

A mechanobiological model for damage-induced growth in arterial tissue with application to in-stent restenosis

Fereidoonnezhad, B., Naghdabadi, R., Sohrabpour, S. & Holzapfel, G., 2017, In : Journal of the mechanics and physics of solids. 101, p. 311-327

Research output: Contribution to journalArticleResearchpeer-review

A mechanochemical 3D continuum model for smooth muscle contraction under finite strains

Stalhand, J., Klarbring, A. & Holzapfel, G., 2011, In : Journal of theoretical biology. 268, p. 120-130

Research output: Contribution to journalArticleResearchpeer-review

A mechanochemical model for smooth muscle cells and its finite element implementation

Murtada, S-I., Kroon, M. & Holzapfel, G., 30 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A medium-throughput-screening method for the detection of the conversion of ketones by omega-transaminases

Steiner, K., Schurmann, M., Midl, J., De Wildeman, S., Remler, P. & Schwab, H., 2013.

Research output: Contribution to conferencePosterResearch

A membrane-free and practical mixed electrolyte direct borohydride fuel cell

Grimmer, C., Zacharias, R., Grandi, M., Pichler, B. E., Kaltenböck, I., Gebetsroither, F., Wagner, J., Cermenek, B., Weinberger, S., Schenk, A. & Hacker, V., 2016, In : Journal of the Electrochemical Society. 163, 3, p. 278-283

Research output: Contribution to journalArticleResearchpeer-review

A memory effect in sheet-fed offset printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. p. 1098 1106 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

A Memory Effect in Sheet-Fed-Offset Printing

Fuchs, W., Dauer, M., Hirn, U. & Bauer, W., 2015, IARIGAI International Research Conference. ., p. 13-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Memristor-Based Multicarrier UWB Receiver

Witrisal, K., 2009, Proc. IEEE Intern. Conf. on Ultra-Wideband. ., p. 679-683

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Amendment to the Galin plane elasto-plastic solution

Ochensberger, W., Celigoj, C. & Ulz, M. H., 2013, In : Journal of engineering mechanics. 139, p. 1658-1662

Research output: Contribution to journalArticleResearchpeer-review

A Meshless Method for Axisymmetric Problems in Continuously Nonhomogeneous Saturated Porous Media

Sladek, J., Sladek, V. & Schanz, M., 2014, In : Computers and Geotechnics. 62, p. 100-109

Research output: Contribution to journalArticleResearchpeer-review

A method capable to determine damage of the outer fibre wall layers

Eckhart, R., Hirn, U. & Bauer, W., 2011, Fine Structure of Papermaking Fibers. 1 ed. Uppsala (Sweden): COST Office, p. 115-124

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

A method for ab initio flight training in a network of simulators

Braunstingl, R., Koglbauer, I. V., Riesel, M., Haberkorn, T. & Schadler, M., 7 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Method for Dynamic Allocation of Tasks in Clusters of Embedded Smart Cameras

Bramberger, M., Rinner, B. & Schwabach, H., 2005, IEEE International Conference on Systems, Man, and Cybernetics. ., p. 2595-2600

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A method for electrically isolated voltage measurement in PWM inverters

Vorauer, M., Krischan, K. & Mütze, A., 2011, International Conference on Electrical Drives and Power Electronics. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2012.

Research output: Contribution to conferencePosterResearch

A Method for Electrically Isolated Voltage Measurement in PWM Inverters

Krischan, K., 2011.

Research output: Contribution to conferencePosterResearch

A method for emission estimation for microscopic traffic flow

Kraschl-Hirschmann, K., Zallinger, M. S., Luz, R., Fellendorf, M. & Hausberger, S., 29 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for emission estimation for microscopic traffic flow simulation

Kraschl-Hirschmann, K., Zallinger, M. S., Luz, R., Fellendorf, M. & Hausberger, S., 2011, 2011 IEEE Forum on Integrated and Sustainable Transportation Systems - Proceedings. ., p. 300-305

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A method for evaluating the navigability of recommendation algorithms

Lamprecht, D., Strohmaier, M. & Helic, D., 2017, In : Studies in Computational Intelligence. 693, p. 247-259 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Arsenals
Information retrieval

A method for external controlled parameterised automotive design at an initial development stage

Göber, T., Hirz, M. & Krammer, S., 2008, 2008 Encyclopaedia 'Simulation in Automotive Engineering - Best Practices of OEMs and Suppliers'. 1 ed. Graz: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

A Method for externally controlled parameterised Automotive Design at an initial Development Stage

Göber, T., Hirz, M. & Krammer, S., 2006, Proceedings / 2006 Conference Virtual Product Development (VPD) in Automotive Engineering. Graz: payerconsulting, p. 103-118

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Method for Fast Jitter Tolerance Analysis of High-Speed PLLs

Erb, S. & Pribyl, W., 2011, Design, Automation and Test in Europe. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

A Method for GC–Olfactometry Panel Training

Vene, K., Seisonen, S., Koppel, K., Leitner, E. & Paalme, T., 2013, In : Chemosensory perception. 6, 4, p. 179-189

Research output: Contribution to journalArticleResearchpeer-review

A method for improved 4D-computed tomography data acquisition

Kupper, M., Sprengel, W., Winkler, P. & Zurl, B., 2017, In : Zeitschrift für medizinische Physik. 27, 1, p. 31-38

Research output: Contribution to journalArticleResearchpeer-review

A method for incorporating residual stresses into finite element simulations with an application to abdominal aortic aneurysms

Fastl, T., Pierce, D., Weisbecker, H. & Holzapfel, G., 9 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for incorporating residual stresses into patient-specific finite element simulations of arteries with an example on AAAs

Pierce, D., Fastl, T., Weisbecker, H., Rodriguez-Vila, B., Gómez Aguilera, E. J. & Holzapfel, G., 10 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for incorporating three-dimensional residual stretches/stresses into patient-specific finite element simulations of arteries

Pierce, D., Fastl, T., Rodriguez-Vila, B., Verbrugghe, P., Fourneau, I., Maleux, G., Herijgers, P., Gómez Aguilera, E. J. & Holzapfel, G., 2015, In : Journal of the mechanical behavior of biomedical materials. 47, p. 147-164

Research output: Contribution to journalArticleResearchpeer-review

A method for measuring the electrical contact resistance during welding

Galler, M., Ernst, W. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

A method for mixed integer convex programming

Burkard, R., 1973, Proceedings of the 4th International Conference on Probability Theory (Brasov 1971). Bucharest: Editura Academiei Republicii Socialiste Romania, p. 497-504

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A method for preparation of thin corrosion layers of brass for TEM investigations

Hofer, F., 1987, In : Journal of microscopy. 145, p. 225-231

Research output: Contribution to journalArticleResearchpeer-review

A method for preparing extensible paper on the laboratory scale

Lahti, J., Schmied, F. & Bauer, W., 2014, In : Nordic pulp & paper research journal. 2, p. 317-321

Research output: Contribution to journalArticleResearchpeer-review