Find Research Outputs

2004

Process Synthesis as a Means for Technology Development

Halász, L., Niederl, A. & Narodoslawsky, M., 2004, PRES04. Praha: Process Engineering Publisher, p. 1403-1403

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2003

Causality considerations for the identification of continous-time Volterra systems

Schwingshackl, D., Kubin, G. & Paoli, G., 2003, The 11th Workshop on Nonlinear Dynamics of Electronic Systems : NDES 2003. Zürich: ETH Zürich, p. 233-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Robust high precision 2d optical range sensor

Brandner, M. & Thurner, T., 2005, Optical measurement systems for industrial inspection IV. Osten, W. (ed.). Bellingham, Wash.: SPIE, Vol. 5856. p. 327-335 (Proceedings of SPIE).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Integrated Lateral Assistance for Heavy Duty Vehicles

Rosinger, W., Hirschberg, W., Heyes, D. & Schwertberger, W., 2010, AVEC'10. ., p. 687-692

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2008

Visualisation Techniques for Analysis and Exploration of Multimedia Data

Sabol, V., Kienreich, W. & Granitzer, M., 2008, Multimedia Semantics — The Role of Metadata. Berlin: Springer, Vol. 101. p. 219-238 (Studies in computational intelligence).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2010

Towards Dynamic Reconfigurable Load-balancing for Hybrid Desktop Platforms

Binotto, A., Pereira, C. E. & Fellner, W-D., 2010, 2010 IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum. New York: Institute of Electrical and Electronics Engineers, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Are Online Co-Adaptive Sensorimotor Rhythm Brain-Computer Interface Training Paradigms Effective?

Cunha, J. D. & Scherer, R., 2018, 2018 International Conference on Cyberworlds (CW). p. 419-422

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1991

The contribution of vibrational energy on the sticking of hydrogen on copper surfaces

Berger, H. F., Winkler, A., Leisch, M. & Rendulic, K., 1991, Contributions of 3S 1991. Wien: HTU Druck, p. 97-ff

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2010

Merge problems with high speed sorters

Jodin, D. & Wolfschluckner, A., 2010, Progress in Material Handling Research: 2010. Charlotte, NC, USA: MHIA Material Handling Industry of America, p. 186-196

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Gene and Protein Expression Profiling in Liver in a Sepsis-Baboon Model

Schmidt-Gann, G., Schmidt, K., Uehlein, M., Struck, J., Bergmann, A., Schmalstieg, D., Streit, M., Lex, A., van der Nest, D. G., van Griensven, M. & Redl, H., 2009, (Accepted/In press) Proceedings of 32nd Annual Meeting on Shock. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Irregularities of distributions and extremal sets in combinatorial complexity theory

Aistleitner, C. & Hinrichs, A., 2018, Contemporary computational mathematics - a celebration of the 80th birthday of Ian Sloan. Vol. 1, 2, Springer, Cham. p. 59-74

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

2017

Methodology for Automated Fault Diagnosis on Engine Test Beds

Wohlthan, M., Pirker, G., Sauperl, I., Wimmer, A., Rossegger, W. & Buch, N., 2017, SIAT Symposium on International Automotive Technology 2017. (SAE Technical Paper).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1998

Charakterisierung dünner Cu Aufdampfschichten mit Hilfe der Atomsonde

Strolz, J. & Leisch, M., 1998, AOFA 10. Kaiserslautern: ., p. 121-121

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2003

Electrocorticogram as the Basis for a Direct Brain Interface: Opportunities for Improved Detection Accuracy

Huggins, J. E., Levine, S. P., Fessler, J. A., Sowers, W. M., Pfurtscheller, G., Graimann, B., Schlögl, A., Minecan, D. N., Kushwaha, R. K., BeMent, S. L., Sagher, O. & Schuh, L. A., 2003, International IEEE EMBS Conference on Neural Engineering. ., p. 587-590

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2006

Hydrogen in Austria - Activities and Perspectives

Klell, M., 2006, (Accepted/In press) International German Hydrogen Energy Congress = Internationaler Deutscher Wasserstoff-Energietag. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Error Correction Coding for Physical Unclonable Functions

Hofer, M. & Böhm, C., 2010, (Accepted/In press) Austrochip, Workshop on Microelectronics. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2000

Nonuniform distortionless transmission lines

Prechtl & Schürhuber, R., 2000, In : Journal of electrical engineering.

Research output: Contribution to journalArticleResearch

2012

1D Heat Exchanger Simulation to Capture the Cycling Transients of Domestic Refrigeration Appliances Working with R600a

Berger, E., Heimel, M., Almbauer, R. & Lang, W., 2012, International Refrigeration and Air Conditioning Conference. ., p. X-X

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Varactor Tuned Transmit-Array Cell

Russo, I., 2011, (Accepted/In press) ESA Antenna Workshop. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

In-situ assessment of strain behaviour inside tunnel linings using distributed fibre optic sensors

Monsberger, C., Lienhart, W. & Moritz, B., 2018, In : Geomechanics and Tunnelling . 11, 6, p. 701-709

Research output: Contribution to journalArticleResearchpeer-review

2014

Active participation during walking reduces single trial connectivity in sensorimotor areas

Wagner, J., 2014, (Accepted/In press) Proceedings of the 6th International BCI Conference Graz 2014. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1999

DigLib 2000 - A Working Prototype for the Next Generation of Digital Libraries

Schmaranz, K. & Gütl, C., 1999, Proceedings 3rd International Austrian-Israeli Technion Symposium. ., p. XXX-XXX

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

Boundary element mass matrix - Strange but useful for hybrid MBS/BEM contact simulation

Steinbach, O. & Eberhard, P., 2001, (Submitted) Trends in Computational Structural Mechanics. Wall, W. A. (ed.). Barcelona: CIMNE

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2013

CIRED 2013, Session2, Power Quality and Electromagnetic Compatibility (Special Report)

DeJaeger, E., Renner, H. & Stockman, K., 2013, 22th International Conference and Exhibition on Electricity Distribution. Brüssel: ., p. 2/1-2/33

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2006

Enzymes for polymer surface modification

Fischer-Colbrie, G., Heumann, S. & Gübitz, G., 2006, Modified Fibres with Medical and Speciality Applications. 1 ed. Dordrecht, The Netherlands: Kluwer Academic Publishers, p. 181-189

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2013

Linking EDX and EELS for an assumption-free quantitative STEM compositional analysis

Kothleitner, G., Fladischer, S., Grogger, W. & Meingast, A., 2013, Enhanced Data Generated by Electrons. ., p. T22-T22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Reduction of Harmonics of Single Phase Induction Motors with a Small Power Range by Specified Design Steps

Bacher, J. P. & Köfler, H., 2006, Proceedings of the XVII International Conference on Electriacal Machines (ICEM 2006) on CD. ., p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Fragebogen zur Ermittlung der Wahrscheinlichkeit von Therapiadhärenz bei inhalativen Medikamenten unter Alltagsbedingungen in der pneumologischen Praxis

Hellmann, A., Schmitt, A., Stadlober, E. & Andres, J., 1 Aug 2017, In : Atemwegs- und Lungenkrankheiten. 43, 8, p. 367-373 12 p.

Research output: Contribution to journalArticleResearchpeer-review

1979

Quantitative analysis of ultrasonic signals

Leitgeb, N. & Schuy, S., 1979, Proc. XII Internat. Conference on Medical and Biological Engineering, V International Conference on Medical Physics. ., p. 33.2-33.2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Modelling the cut-off scale supplying variable in bridging methods for turbulence flow simulation

Girimaji, S. & Basara, B., 2013, Proc. of 4th Int. Conference on Jets, Wakes and Separated Flows. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2004

Bio-Energy chains from perennial crops in Southern Europe

CHRISTOU, M., FERNANDEZ, J., GOSSE, G., VENTURI, G., Bridgwater, A. V., SCHEURLEN, K., Obernberger, I., Van de Beld, L., SOLDATOS, P. & REINHARDT, G., 2004, Proc. of the 2nd World Conference and Exhibition on Biomass for Energy, Industry and Climate Protection. Rom: ., p. 604-607

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Externally with biomass and internally with natural gas fired micro gas turbine – system, furnace and high temperature heat exchanger design as well as performance data from first test runs

Thek, G., Brunner, T. & Obernberger, I., 2010, Proc. of the 18th European Biomass Conference and Exhibition. Lyon: ., p. 1891-1899

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

How do Social Networks Influence Learning Outcomes? A Case Study in an Industrial Setting

Maglajlic, S. & Helic, D., 2012, In : Interactive technology and smart education. 9, 2, p. 74-88

Research output: Contribution to journalArticleResearchpeer-review

2007

Oblique Propagation of Activation Allows the Detection of Uncoupling Microstructures from Cardiac Near Field Behavior

Hofer, E., Wiener, T., Prassl, A. J., Thurner, T. & Plank, G., 2007, 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society: "Sciences and Technologies for Health. ., p. 415-418

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Geomagnetically induced currents modelling and monitoring transformer neutral currents in Austria

Halbedl, T., Renner, H. & Achleitner, G., 1 Dec 2018, In : e&i - Elektrotechnik und Informationstechnik. 135, 8, p. 602-608 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Electric instrument transformers
Induced currents
Monitoring
DC transformers
2001

Untersuchung induzierter Defekte an STM Spitzen mit Hilfe der Atomsonde

Fian, A. & Leisch, M., 2001, Verhandlungen der Deutschen Physikalischen Gesellschaft. Weinheim: Physik-Verlag GmbH, Vol. 1/2001. p. 330-330 (Verhandlungen der Deutschen Physikalischen Gesellschaft).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2011

Novel range extender concepts for 2025 with regard to small engine technologies

Trattner, A., Pertl, P., Schmidt, S. & Sato, T., 2011, 17th Small Engine Technology Conference / Diversity of Small Powertrain Technologies. SAE, p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Mathematische Äquivalenz von Abhängigkeit und bedingter Extremalität und ihre Anwendung auf die Thermodynamik

Huemer, H., 2007, Thermodynamics 2007. ., p. 0-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Evaluation of strategies for highly transient operation of diesel-gas engines

Malin, M., Redtenbacher, C., Lurf, G., Wermuth, N. & Wimmer, A., 1 Jan 2018, ASME 2018 Internal Combustion Engine Division Fall Technical Conference: Volume 1: Large Bore Engines; Fuels; Advanced Combustion. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Gas engines
Diesel engines
Engines
Engine cylinders
Dual fuel engines
2011

Microcapsules for Drug Delivery

Rollett, A., Cavaco-Paulo, A., Gomes, A., Preßnig, M., Thallinger, B., Reiter, T. & Gübitz, G., 2011.

Research output: Contribution to conferencePosterResearch

2007

Analyse von Benchmarking Kennzahlen im Facility Management

Merkel, A., 2007, Forum Bauinformatik 2007 - Junge Wissenschaftler forschen. Graz: Verlag der Technischen Universität Graz, Vol. 19. p. 153-160 (Forum Bauinformatik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Friction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performance

Cordeiro de Proença, B., Blaga, L., Fernandez dos Santos, J., Bresciani Canto, L. & de Traglia Amancio Filho, S., 3 Jul 2017, In : Welding International. 31, 7, p. 509-518 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Riveting
Rivets
Polyamides
Aluminum alloys
Metals
2005

Uncertainty in optical measurement applications: a case study

Brandner, M. & Thurner, T., 2005, Proceedings of the 2005 IEEE International Workshop on Advanced Methods for Uncertainty Estimation in Measurement. ., p. 78-83

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Simulation of the Thermal Management System with the Comprehensive Vehicle Simulation Model

Donath, C., Kitanoski, F. & Petutschnig, H., 2008, FISITA Automotive World Congress 2008. ., p. xx-xx

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2013

Towards Linking Buyers and Sellers: Detecting Commercial Intent on Twitter

Hollerit, B., Kröll, M. & Strohmaier, M., 2013, (Accepted/In press) Making Sense of Microposts (MSM'13). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

Piston Slap Induced Noise Simulation Considering Elasto-hydrodynamic Contact Conditions

Priebsch, H-H., Herbst, H. & Offner, G., 21 Apr 2001.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

Variability Identification by Selective Targeting of Significant Nodes

Frank, A. A., 2012, ICCGI 2012 : The Seventh International Multi-Conference on Computing in the Global Information Technology. ., p. 148-153

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1998

Untersuchungen von Spitzenkontakten im STM und in der Atomsonde

Lesnik, J., Ernst, C. & Leisch, M., 1998, Verhandlungen der Deutschen Physikalischen Gesellschaft. Weinheim: Physik-Verlag GmbH, p. 890-890

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2007

Electrical conductivity imaging via contactless measurements: a feasibility study on diagnosing tumorous tissues

Gürsoy, D. & Gencer, N. G., 2007, BIYOMUT - Biyomedikal Mühendisliği Ulusal Toplantisi. ., p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1994

3D atom probe study of preferential sputtering on Ni-Pt alloys

Athenstaedt, W. & Leisch, M., 1994, Book of Abstracts. Rouen: ., p. C-1-C-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review