Find Research Outputs

Influence of bonding on superconductivity in high-pressure hydrides

Heil, C. & Boeri, L., 2015, In : Physical Review / B. 92, p. 060508-060513

Research output: Contribution to journalArticleResearchpeer-review

Influence of bore/stroke ration and inlet port geometry on the charge motion and mixture formation in DI spark ignited engines

Schmidt, S., Trattner, A., Abart, M., Schögl, O., Kirchberger, R. & Eichlseder, H., 8 Jun 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of boundary conditions and component size on electricity demand in solar thermal and heat pump combisystems

Poppi, S., Bales, C., Haller, M. & Heinz, A., 2016, In : Applied Energy. 162, p. 1062-1073

Research output: Contribution to journalArticleResearchpeer-review

Influence of boundary conditions on starvation of piston ring conjunctions

Offner, G., Bewsher, S. R., Mohammadpour, M., Rahmani, R. & Rahnejat, H., 2017, 6th World Tribology Congress (WTC), Beijing.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of boundary conditions on the location and evolution of polar effects in a hypoplastic Cosserat material

Bauer, E. & Huang, W., 2000, Proc. of the 4th Euromech - Solid Mechanics Conference. Metz, p. 121

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Boundary Layer Flow and Vortex Finder Length on Separation Behaviour of Cyclones

Staudinger, G., Hoffmann, D. & Gorton-Hülgerth, A., 10 Mar 1998.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of cable, grounding configuration and filters on bearing currents – investigations at inverter-fed induction motors up to 560 kW

Mütze, A. & Binder, A., 2003, Proceedings of the 46th International Conference on Power Electronics and Intelligent Motion Power Quality (PCIM), paper no. IM 2.2. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Calu-3 permeability on in silico pharmacokinetic prediction of inhalation products

Wu, S., Mercuri, A., Salar-Behzadi, S., Schiaretti, F., Zambelli, E., Brogin, G., Govoni, M., Meindl, C., Stranzinger, S., Mohr, S., Bresciani, M. & Fröhlich, E., 2015.

Research output: Contribution to conferencePosterResearch

Influence of Camera Properties on Image Analysis in Visual Tunnel Surveillance

Pflugfelder, R., Bischof, H., Fernandez Dominguez, G., Nölle, M. & Schwabach, H., 2005, Proceeings of the 8th international Conference on Intelligent Transportation Systems (ITSC). IEEE Computer Society, p. 868-873

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of capillary blood flow and first pass effects on determination of tissue permeability

Pedevilla, M., Stollberger, R., Wach, P. & Ebner, F., 1998.

Research output: Contribution to conferencePosterResearch

Influence of capillary blood flow and first pass effects on determination of tissue permeability.

Pedevilla, M., Stollberger, R., Wach, P. & Ebner, F., 1998, Proc. ISMRM 5th Meeting. ., p. 1651-1651

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of carrier particle morphology on the performance of dry powder inhalers

Littringer, E. M., Schröttner, H., Mescher, A., Maier, M., Walzel, P. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

Influence of Carrier Surface Fines on Dry Powder Inhalation Formulations

Urbanetz, N. A. & Boshhiha, A. M., 2009, In : Drug development and industrial pharmacy. 35, 8, p. 904-916

Research output: Contribution to journalArticleResearchpeer-review

Influence of cathodic protection (CP) on the distribution of ions in the concrete overlay containing chlorides

Tritthart, J., Schwarz, W., Sonnleitner, R. & Nauer, G. E., 2004, Proceedings of "EUROCORR 2004" paper 11-O-383. Frankreich: ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of Cavitation in Diesel Injection Nozzles on Mixture Formation and Combustion

Fimml, W., Chmela, F., Pemp, B. & Wimmer, A., 2010, 5th International MTZ Conference, ATZ-Heavy-Duty , On- and Off-Highway Engines. ., p. xx-yy

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of cavitation in the injection nozzle on combustion in diesel engines

Fimml, W., Chmela, F., Pirker, G. & Wimmer, A., 2010, In : International journal of engine research. 11, 5, p. 375-390

Research output: Contribution to journalArticleResearchpeer-review

Influence of cavitation on the water flow in a pipe with a sudden expansion

Wigley, G., Klasinc, R., Dum, T. & Logar, R., 1996, Eighth international symposium on applications of laser techniques to fluid mechanics. ., p. X-XX

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Cellulase on Indigo Backstaining

Andreaus, J., Campos, R., Gübitz, G. & Cavaco-Paulo, A., 2000, In : Textile research journal. 70, p. 628-632

Research output: Contribution to journalArticleResearchpeer-review

Influence of Cement Type on Fresh and Hardened UHPC Properties

Hadl, P., Kim, H. H. & Nguyen, V. T., 2015.

Research output: Contribution to conferencePosterResearch

Influence of Cement Type on Fresh and Hardened UHPC Properties

Hadl, P., Kim, H. H. & Nguyen, V. T., 2015, Proceedings of CCC 2015. ., p. 75-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of chemical oxidation od softwood kraft pulp on fiber charges and paper strength

Diebald, S. & Schennach, R., 23 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of co-ligands in synthesis, photoluminescence behavior and catalytic activities of zinc complexes of 2-((E)-((pyridin-2-yl)methylimino)methyl)phenol.

Kundu, P., Chakraborty, P., Adhikary, J., Chattopadhyay, T., Fischer, R. C., Mautner, F. A. & Das, D., 2015, In : Polyhedron. 85, p. 320-328 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Influence of combustion conditions on the genotoxic potential of fine particle emissions from small-scale wood combustion

Brunner, T., Kelz, J., Obernberger, I., Jalava, P. & Hirvonen, M-R., 2011, Proc. of the 3rd Central-European Biomass Conference. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of compartment geometry on the residence time of single drops in Kühni extraction columns

Buchbender, F., Fischer, A. & Pfennig, A., 2013, In : Chemical Engineering Science. 104, p. 701-716

Research output: Contribution to journalArticleResearchpeer-review

Influence of Congestion Costs on the Midterm Rehabilitation Planning of Drinking Water Pipelines

Gangl, G., Fuchs-Hanusch, D. & Fellendorf, M., 2007, European Water & Wastewater Management Conference. Newcastle: Aqua Enviro Technology Transfer, p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of constitutive model and EC7 design approach in FEM analysis of deep excavations

Schweiger, H., 2009, ISSMGE Int. Seminar on Deep Excavations and Retaining Structures. Budapest: ISSMGE Hungarian National Committee, p. 99-114

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Constraining on the Toughness Behaviour of Multi-Layer Weldments

Kleber, S., Reiss, J., Buchmayr, B., Cerjak, H-H. & Perteneder, E., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of construction time on the productivity of construction works

Hofstadler, C., 2016, Proceedings of the CIB World Building Congress 2016 - Volume IV: Understanding impacts and functioning of different solutions. p. 485-496 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of CO on the adsorption and reaction of methanol on Pd(111)

Demirci, E., Schennach, R. & Winkler, A., 2007, Jahrestagung der Österreichischen Physikalischen Gesellschaft. ., p. 71-71

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of correlation effects on the magneto-optical properties of the half-metallic ferromagnet NiMnSb

Chadov, S., Minar, J., Ebert, H., Perlov, A., Chioncel, L., Katsnelson, M. & Lichtenstein, A., 2006, In : Physical Review / B. 74, p. 140411(R) -140411(R)

Research output: Contribution to journalArticleResearchpeer-review

Influence of cost reduction and increasing energy density on thermal runway gas emission of Li-ion batteries

Essl, C., Golubkov, A., Thaler, A. & Fuchs, A., 25 Sep 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Influence of Crankshaft Torsion on Cylinder Pressure Diagnostics

Stadler, J., Ciecinski, M., Wimmer, A. & Jauk, T., 2015, In : MTZ industrial. p. 58-65

Research output: Contribution to journalArticleResearch

Influence of crop protection on microbial communities and antagonistic potential associated with grapevine (Vitis vinifera L.)

Schmid, F., 2010.

Research output: Contribution to conferencePosterResearch

Influence of Cross Jointing in Block Slumping Failures

Kieffer, D. S., 2006, Proc. 41st U.S. Rock Mechanics Symposium, Golden, CO.. ., p. .-.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of cross passages temperatures on the life-cycle cost of technical equipment in a railway tunnel

Scherz, M., Fruhwirt, D., Bacher, M., Steiner, H., Passer, A. & Kreiner, H., 2019, SBE19 Graz - Sustainable Built Environment D-A-CH Conference 2019: Transition Towards a Net Zero Carbon Built Environment. Verlag der Technischen Universität Graz, p. 263

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains

Rath, G., Fuchs, F. & Enzinger, N., 2 Nov 2016, In : Materials Science Forum. 879, p. 508-513

Research output: Contribution to journalArticleResearchpeer-review

Influence of Culture Conditions on the Bio-hydroxylation of Protected Carboxylic Acids with Cunninghamella blakesleeana DSM 1906

Kreiner, M., Braunegg, G., Kopper, I., Zeiser, A., De Raadt, A., Griengl, H., Petsch, M., Plachota, P., Schoo, N. & Weber, H., 5 Sep 1995.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of curvature dynamics on pulsatile coronary artery flow in a realistic bifurcation model

Prosi, M., Perktold, K., Ding, Z. & Friedman, M. H., 2004, In : Journal of biomechanics. 37, p. 1767-1775

Research output: Contribution to journalArticleResearchpeer-review

Influence of damping and different interaction modelling on a high arch dam

Goldgruber, M., Zenz, G. & Shahriari, S., 2013, (Accepted/In press) Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Influence of Deep Excavations on Nearby Existing Tunnels

Huang, X., Schweiger, H. & Huang, H., 2013, In : International Journal of Geomechanics. 13, 2, p. 170-180

Research output: Contribution to journalArticleResearchpeer-review

Influence of deformation on phase transformation and precipitation

Kozeschnik, E., Timoshenkov, A., Piotr, W., Albu, M., Klarner, J., Gruber, G. & Sommitsch, C., 8 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Timoshenkov, A., Warczok, P., Albu, M., Jürgen, K., Ernst, K., Gruber, G. & Sommitsch, C., 2014, In : Steel research international. 85, 6, p. 954-967

Research output: Contribution to journalArticleResearchpeer-review

Influence of denoising techniques on the absolute CBF quantification of ASL perfusion data

Spann, S. M., Kazimierski-Hentschel, K., Aigner, C. S., Kraiger, M. & Stollberger, R., 2016.

Research output: Contribution to conferenceAbstractResearchpeer-review

Influence of density, pressure and mean grain diameter on shear band localization in granular materials

Bauer, E. & Tejchman, J., 1998, Proc. of the 3th Int. Conf. on Mechanics of Jointed and Faulted Rock. Wien, p. 151-156

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of density and pressure on spontaneous shear band formations in granular materials

Bauer, E. & Huang, W., 2001, Proc. of the IUTAM Symposium on Theoretical and Numerical Methods in Continuum Mechanics of Pourous Materials. Kluwer Academic Publishers, p. 245-250

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of design and leakages of the window-wall connection on the sound insulation

Ferk, H., Buchegger, B. & Meißnitzer, M., 2014, Inter.noise 2014. Melbourne: als CD + abstract book erschienen, p. 99-99

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of different annealing conditions in the preparation of metal halide perovskite films on their performance in solar cells

Zahirovic, I., Höfler, S. F., Rath, T., Buchmaier, C., Kunert, B., Resel, R. & Trimmel, G., 28 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Influence of different branched alkyl side chains on the properties of imidazolium-based ionic liquids

Erdmenger, T., Vitz, J., Wiesbrock, F. & Schubert, U. S., 2008, In : Journal of materials chemistry. 18, p. 5267-5273

Research output: Contribution to journalArticleResearchpeer-review

Influence of Different Cutting Techniques on the Magnetic Characteristics of Electrical Steels Determined by a Permeameter

Bali, M. & Muetze, A., 1 Mar 2017, In : IEEE Transactions on Industry Applications. 53, 2, p. 971-981 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Hysteresis
Carbon dioxide lasers
Electric machinery
Lasers

Influence of different cutting techniques on the magnetic characteristics of electrical steels determined by a remagraph

Bali, M. & Muetze, A., 16 Feb 2016, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 1190-1196 7 p. 7409212

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Steel sheet
Hysteresis
Iron