Find Research Outputs

Search concepts
Selected filters
2001

HNL-Catalysed Transformations of Derivatised Pyrrolcarboxaldehydes

Purkarthofer, T., Fechter, M., Fröhlich, R., Gaisberger, R. & Griengl, H., 2 Sep 2001.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2007

Threonine aldolases - an emerging tool for organic synthesis

Steinreiber, J., Fesko, K., Reisinger, C., Schürmann, M., van Assema, F., Wolberg, M., Mink, D. & Griengl, H., 2007, In : Tetrahedron. 63, p. 918-926

Research output: Contribution to journalArticleResearchpeer-review

2001

Isomer- and Diamutamer-Enumeration with MATHEMATICA

van Almsick, M., Dolhaine, H. & Hönig, H., 2001, In : Match - communications in mathematical and in computer chemistry. 43, p. 143-157

Research output: Contribution to journalArticleResearchpeer-review

2005

Applicaton of L/D-threonine Aldolase in the Synthesis of Phenylserine-Derivatives

Steinreiber, J., Reisinger, C., Remler, P., Schwab, H., Schürmann, M., van Assema, F. & Griengl, H., 17 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 2015, In : Materials at high temperatures. 32, 3;32.03, p. 318-322

Research output: Contribution to journalArticleResearchpeer-review

2007

Recrystallization behaviour of the nickel-based alloy 80A during hot forming

Mitsche, S., Pölt, P. & Sommitsch, C., 2007, In : Journal of microscopy. 3, 227, p. 267-274

Research output: Contribution to journalArticleResearchpeer-review

2014

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File
2005

Report on the simulation of ORI configuration rod rolling mill

Sommitsch, C. & Buchmayr, B., 2005, .

Research output: Book/ReportOther reportResearch

2001

Biohydroxylation of Open Chain Ketones Employing Beauveria bassiana and the Docking/Protecting Group Concept

De Raadt, A., Fetz, B., Griengl, H., Kern, J., Klingler, M., Krenn, B., Münzer, D. & Terzani, T., 2 Sep 2001.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2003

Follow-up Chemistry of Enzymatically Produced Optically Pure Ferrocenyl Cyanohydrins

Überbacher, B., Weber, H., Fröhlich, R. & Griengl, H., 28 Jun 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fluorescent probes: Tagged iminoalditols as reversible glycosidase inhibitors

Greimel, P., Hermetter, A., Sprenger, F., Spreitz, J., Steiner, A., Stütz, A. & Wrodnigg, T. M., 24 Sep 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2007

Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

Sommitsch, C. & Buchmayr, B., 2007, In : Steel research international. 78, 10/11, p. 740-744

Research output: Contribution to journalArticleResearchpeer-review

2001

Simulation der Gefügeentwicklung bei Warmwalzen

Sommitsch, C., Wieser, V., Wurm, C. & Lenger, H., 2001, In : Berg- und hüttenmännische Monatshefte. 146, 1, p. 6-9

Research output: Contribution to journalArticleResearchpeer-review

2012

Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Proceedings of the 12th World Conference on Titanium. Beijing: Science Press, Vol. Volume I. p. 493-496

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007
2010

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2010, In : Key Engineering Materials . 424, p. 27-34

Research output: Contribution to journalArticleResearchpeer-review

2014

Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

Lemmerer, D., Kicin, M., Spachinger, S., Wagner, J., Enzinger, N. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 298-299

Research output: Contribution to journalArticleResearchpeer-review

2015

Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : HTM - journal of heat treatment and materials. 70, 1, p. 19-25

Research output: Contribution to journalArticleResearch

2004

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004, Microscience 2004 / International Conference and Exhibition. ., p. 24-24

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Numerical analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 2010, Proceeding 12th International Conference on Aluminium Alloys. ., p. 542-547

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : Steel research international. 85, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

2008

Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion

Sommitsch, C., Krumphals, F., Stotter, C., Dendl, D., Wlanis, T., Huber, D. & Redl, C., 2008, International Aluminum Extrusion Technology Seminar. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Redl, C., 2008, In : Key Engineering Materials . 367, p. 169-176

Research output: Contribution to journalArticleResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

2000

Modelling Recrystallization of Nickel-Base Alloys

Sommitsch, C., Mitter, W. & Kleber, S., 2000, Werkstoffwoche. ., p. Internet-Internet

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Investigation and numerical modelling of extrusion tool life time

Sommitsch, C., Redl, C., Wieser, V., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, International Tooling Conference. ., p. 589-596

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2005

Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Verformungskundliches Kolloquium. Lehrstuhl f. Umformtechnik, p. 139-155

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Modeling surface rolling contact fatigue crack initiation taking severe plastic shear deformation into account

Trummer, G., Marte, C., Dietmaier, P., Sommitsch, C. & Six, K., 17 Feb 2016, In : Wear. 352-353, p. 136 - 145

Research output: Contribution to journalArticleResearchpeer-review

2015

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2010

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Zur Theorie der Gefügeänderungen in Metallen: Verfestigung, Erholung, Korngrenzenbewegung und Rekristallisation

Sommitsch, C., Reichmann, K. (ed.), Hofer, F. (ed.) & Mitter, W., 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz : Advanced material science)

Research output: Book/ReportBookResearch

2006

Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In : Berg- und hüttenmännische Monatshefte. 151, 9, p. 344-349

Research output: Contribution to journalArticleResearchpeer-review

2010

Modelling and Simulation of Strengthening in Complex Martensitic 9-12% Cr Steel and a Binary Fe-Cu Alloy

Holzer, I., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 2)

Research output: Book/ReportBookResearch

2014

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Timoshenkov, A., Warczok, P., Albu, M., Jürgen, K., Ernst, K., Gruber, G. & Sommitsch, C., 2014, In : Steel research international. 85, 6, p. 954-967

Research output: Contribution to journalArticleResearchpeer-review

2010

On Modelling the Microstructure Evolution of a Ferritic Hot-Work Tool Steel during Short-Term Creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

2009

Gefügecharakterisierung der Superlegierung Allvac 718 PlusTM mittels elektronenmikroskopischer Methoden

Mitsche, S., Huber, D., Wagner, J., Letofsky-Papst, I., Sommitsch, C. & Stockinger, M., 15 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2006

Damage simulation of extrusion dies of different geometry and material

Wlanis, T., Sommitsch, C., Hatzenbichler, T. & Wieser, V., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2009

Problems in Modelling the Damage Behaviour of Steel during Hot Forming with a Special Focus on the Rolling of Seamless Pipes

Pschera, R., Klarner, J. & Sommitsch, C., 1 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Impact of Mg, Cu and Si distribution on the microhardness of Al dendrites after casting, homogenization and continuous cooling of G-AlSi7MgCu0.5

Krumphals, F., Mittermayr, F., Gumpl Philipp, N. V., Stauder, B., Sommitsch, C. & Radis, R., 4 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2004

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2006

Duktile Schädigung und Mikrostrukturentwicklung einer Nickelbasislegierung während der Warmumformung – Experiment und Modellierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Jun 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012001.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites

Yadav, S. D., Bhingole, P. P., Chaudhari, G. P., Nath, S. K. & Sommitsch, C., 2015, In : Key Engineering Materials . 651-653, p. 783-788

Research output: Contribution to journalArticleResearchpeer-review

2008

Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

Sommitsch, C., Harrer, O-K., Rüf, G. & Buchmayr, B., 2008, Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. 1 ed. Bad Harzburg: Grips Media, Vol. 2. p. 113-123 (GRIPS' sparkling world of steel).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2019

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2010

Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.

Research output: Contribution to conferencePosterResearch

2017

Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition

Vollmer, R. & Sommitsch, C., 16 Oct 2017, AIP Conference Proceeedings 1896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access