Find Research Outputs

Search results

• Article

  CFD assessment of a solar honeycomb (SHC) facade element with integrated PV cells

  Brandl, D., Mach, T., Kaltenecker, P., Sterrer, R., Neururer, C., Treberspurg, M. & Hochenauer, C., 2015, In : Solar energy. 118, p. 155-174

  Research output: Contribution to journal › Article

• CFD-based optimization of a transient heating process in a natural gas fired furnace using neural networks and genetic algorithms

  Prieler, R. J., Mayrhofer, M., Gaber, C. E., Gerhardter, H., Schluckner, C., Landfahrer, M., Eichhorn-Gruber, M., Schwabegger, G. & Hochenauer, C., Jun 2018, In : Applied Thermal Engineering. 138, p. 217 234 p.

  Research output: Contribution to journal › Article

• CFD Investigation of Non-Condensable Gases in Vacuum and Non-Vacuum Steam Sterilizers

  Feurhuber, M., Magno, M., Miranda, M., Prieler, R. J. & Hochenauer, C., Apr 2019, In : Chemie - Ingenieur - Technik. 91, 4, p. 502-513 12 p.

  Research output: Contribution to journal › Article

  • Sterilizers
  • Steam
  • Computational fluid dynamics
  • Gases
  • Vacuum

• CFD investigations of steam penetration, air-removal and condensation inside hollow loads and cavities

  Feurhuber, M., Magno, M., Miranda, M. & Hochenauer, C., 5 Nov 2018, In : Applied Thermal Engineering. 147, p. 1070 - 1082 13 p.

  Research output: Contribution to journal › Article

• CFD modelling and performance increase of a pusher type reheating furance using oxy-fuel burners

  Mayr-Mittermüller, B., Prieler, R. J., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

  Research output: Contribution to journal › Article

• CFD modelling and performance increase of a pusher type reheating furnace using oxy-fuel burners

  Mayr, B., Prieler, R., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

  Research output: Contribution to journal › Article

  • Fuel burners
  • Computational fluid dynamics
  • Furnaces
  • Air
  • Productivity

• CFD-model to predict the local and time-dependent scale formation of steels in air- and oxygen enriched combustion atmospheres

  Schluckner, C., Gaber, C., Demuth, M., Forstinger, S., Prieler, R. & Hochenauer, C., 1 Oct 2018, In : Applied Thermal Engineering. 143, p. 822-835 14 p.

  Research output: Contribution to journal › Article

  • Computational fluid dynamics
  • Oxygen
  • Steel
  • Furnaces
  • Air

• CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes

  Schluckner, C., Subotić, V., Lawlor, V. & Hochenauer, C., 16 Feb 2017, In : International Journal of Hydrogen Energy. 42, 7, p. 4434 - 4448 15 p.

  Research output: Contribution to journal › Article

• CFD simulation of the inactivation of Geobacillus stearothermophilus on dental handpieces

  Feurhuber, M., Burian, P. J., Magno, M., Miranda, M. & Hochenauer, C., Sep 2019, In : International Journal of Heat and Mass Transfer. 144, 17 p., 118649.

  Research output: Contribution to journal › Article

• Characterization and evaluation of a novel semi-industrial scale vertical shaft furnace for particle spheroidization

  Knoll, M., Gerhardter, H., Prieler, R. J., Hochenauer, C., Mühlböck, M., Tomazic, P. & Schröttner, H., 1 Jun 2020, In : Journal of the Energy Institute. 93, 3, p. 1110-1124 15 p.

  Research output: Contribution to journal › Article

  • furnaces
  • Furnaces
  • evaluation
  • charge flow devices
  • Computational fluid dynamics

• Characterization and performance evaluation of ammonia as fuel for solid oxide fuel cells with Ni/YSZ anodes

  Stöckl, B., Subotić, V., Preininger, M., Schwaiger, M., Evic, N., Schröttner, H. & Hochenauer, C., 12 Dec 2018, In : Electrochimica acta.

  Research output: Contribution to journal › Article

• Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system

  Preininger, M., Stöckl, B., Subotić, V. & Hochenauer, C., 1 Jan 2020, In : Energy Conversion and Management. 203, 12 p., 112215.

  Research output: Contribution to journal › Article

  Open Access

  • Electrolysis
  • Fuel cells
  • Oxides
  • Design of experiments
  • Flow of gases

• Characterization of the temperature distribution on steel tubes for different operating conditions in a reheating furnace using CFD and three different measuring methods

  Landfahrer, M., Prieler, R., Mayr, B., Gerhardter, H., Zmek, T., Klarner, J. & Hochenauer, C., 25 Mar 2018, In : Applied Thermal Engineering. 133, p. 39-48 10 p.

  Research output: Contribution to journal › Article

  • Computational fluid dynamics
  • Furnaces
  • Temperature distribution
  • Steel
  • Temperature

• CO/CO2 ratio in biomass char oxidation

  Anca-Couce, A., Sommersacher, P., SHIEHNEJADHESAR, A., Mehrabian Bardar, R., Hochenauer, C. & Scharler, R., 2017, In : Energy Procedia. 120, p. 238-245

  Research output: Contribution to journal › Article

• CO2 post combustion pilot plant test at the Dürnrohr power plant with amino acids

  Rabensteiner, M., Kinger, G., Koller, M. & Hochenauer, C., 2015, In : VGB PowerTech. 11, p. 47-53

  Research output: Contribution to journal › Article

• Comparison between solid body and gas radiation in high temperature furnaces under different oxygen enrichments

  Mayr-Mittermüller, B., Prieler, R. J., Demuth, M. & Hochenauer, C., 25 Dec 2017, In : Applied Thermal Engineering. 127, p. 679-688

  Research output: Contribution to journal › Article

• Comparison of dolomite and lime as sorbents for in-situ H2S removal with respect to gasification parameters in biomass gasification

  Husmann, S. M., Zuber, C., Maitz, V., Kienberger, T. & Hochenauer, C., 2016, In : Fuel. 181, p. 131-138 8 p.

  Research output: Contribution to journal › Article

  • Sorbents
  • Gasification
  • Lime
  • Biomass
  • Calcium Carbonate

• Comparison of dynamic urban building energy models (UBEM): Sigmoid energy signature and physical modelling approach

  Nageler, P. J., Koch, A., Mauthner, F., Leusbrock, I., Mach, T., Hochenauer, C. & Heimrath, R., 15 Nov 2018, In : Energy and Buildings. 179, p. 333-343 11 p.

  Research output: Contribution to journal › Article

  • Office buildings
  • Decarbonization
  • Heating
  • Time and motion study
  • Thermal energy

• Computational analysis of a semi-industrial furnace fired by a flat flame burner under different O2/N2 ratios using the steady laminar flamelet approach

  Mayr, B., Prieler, R. J., Demuth, M., Potesser, M. & Hochenauer, C., 2017, In : Journal of the Energy Institute. 90, 4, p. 602–612

  Research output: Contribution to journal › Article

• Coupled CFD simulation for the cooling process of steel tubes in a rake type cooling bed

  Raic, J., Landfahrer, M., Klarner, J., Zmek, T. & Hochenauer, C., 5 May 2020, In : Applied Thermal Engineering. 171, 14 p., 115068.

  Research output: Contribution to journal › Article

  • Computational fluid dynamics
  • Cooling
  • Mixed convection
  • Steel
  • Geometry

• Critical investigations into the informative value of process challenge devices for narrow lumens used in small steam sterilisers

  Burian, P. J., Feurhuber, M., Miranda, M., Magno, M. & Hochenauer, C., 2020, In : Zentralsterilisation. 28, 2, p. 104-111 8 p.

  Research output: Contribution to journal › Article

• Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis

  Subotić, V., Königshofer, B., Juričić, Đ., Kusnezoff, M., Schröttner, H., Hochenauer, C. & Boškoski, P., 15 Dec 2020, In : Energy Conversion and Management. 226, 113509.

  Research output: Contribution to journal › Article

  • Relaxation time
  • Electrolysis
  • Oxides
  • Fuel cells
  • Solid oxide fuel cells (SOFC)

• Determining the heating characteristics of non-spherical particles in combusting flows

  Gerhardter, H., Prieler, R. J., Knoll, M., Landfahrer, M., Hochenauer, C., Mühlböck, M. & Tomazic, P., 25 Mar 2019, In : Applied Thermal Engineering. 2019, 151, p. 124-133

  Research output: Contribution to journal › Article

• Development and application of a numerically efficient model describing a rotary hearth furnace using CFD

  Landfahrer, M., Schluckner, C., Prieler, R., Gerhardter, H., Zmek, T., Klarner, J. & Hochenauer, C., 1 Aug 2019, In : Energy. 180, p. 79-89 11 p.

  Research output: Contribution to journal › Article

  • Computational fluid dynamics
  • Furnaces
  • Numerical models
  • Heating
  • Economics

• Development of a numerical approach based on coupled CFD/FEM analysis for virtual fire resistance tests—Part A: Thermal analysis of the gas phase combustion and different test specimen

  Prieler, R. J., Mayrhofer, M., Eichhorn-Gruber, M., Schwabegger, G. & Hochenauer, C., 2018, In : Fire and Materials. p. 1-17 17 p.

  Research output: Contribution to journal › Article

• Development of a numerically efficient approach based on coupled CFD/FEM analysis for virtual fire resistance tests—Part B: Deformation process of a steel structure

  Prieler, R., Gerhardter, H., Landfahrer, M., Gaber, C., Schluckner, C., Eichhorn-Gruber, M., Schwabegger, G. & Hochenauer, C., 1 Aug 2020, In : Fire and Materials. 44, 5, p. 704-723 20 p.

  Research output: Contribution to journal › Article

  Open Access

  • Fire resistance
  • Steel structures
  • Computational fluid dynamics
  • Finite element method
  • Steel

• Development of a numerically efficient CFD model to predict transient temperature distribution of mother tubes moving translative and rotative through a gas fired furnace

  Landfahrer, M., Prieler, R. J., Mayr-Mittermüller, B., Gerhardter, H., Schöngrundner, R., Klarner, J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 123, p. 290-300 10 p.

  Research output: Contribution to journal › Article

• Development of a spatially and timely resolved CFD model of a steam sterilizer to predict the load temperature and the theoretical inactivation of bacteria based on sterilization parameters

  Feurhuber, M., Burian, P., Magno, M., Miranda, M. & Hochenauer, C., 1 Dec 2019, In : Physics in Medicine. 8, 100020.

  Research output: Contribution to journal › Article

  Open Access

  • Sterilizers
  • Steam
  • charge flow devices
  • steam
  • deactivation

• Development of Cell-Protecting Methods for Carbon-Removal from Porous Ni-YSZ Anodes and Regeneration of the Cell Performance

  Subotić, V., Stöckl, B., Schluckner, C., Pofahl, S., Lawlor, V., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2441-2449 9 p.

  Research output: Contribution to journal › Article

• Effect of bed material density on the performance of steam gasification of biomass in bubbling fluidized beds

  Soria-Verdugo, A., Von Berg, L., Serrano, D., Hochenauer, C., Scharler, R. & Anca-Couce, A., 1 Dec 2019, In : Fuel. 257, 116118.

  Research output: Contribution to journal › Article

  • Steam
  • Gasification
  • Fluidized beds
  • Tar
  • Tars

• Effect of draught conditions and ignition technique on combustion performance of firewood roomheaters

  Reichert, G., Hartmann, H., Haslinger, W., Oehler, H., Mack, R., Schmidl, C., Schön, C., Schwabl, M., Stressler, H., Sturmlechner, R. & Hochenauer, C., 1 Jan 2017, In : Renewable energy. 105, p. 547-560 14 p.

  Research output: Contribution to journal › Article

  • Ignition
  • Air pollution
  • Gas emissions
  • Hot Temperature

• Effect of pinhole location on degradation in polymer electrolyte fuel cells

  Bodner, M., Hochenauer, C. & Hacker, V., 2015, In : Journal of power sources. 295, p. 336-348

  Research output: Contribution to journal › Article

• Effects on numerical calculations of in-flight particle trajectories and temperatures considering multiple particle size and shape

  Knoll, M., Gerhardter, H., Prieler, R. J., Hochenauer, C., Tomazic, P. & Schröttner, H., 1 Nov 2020, In : International Journal of Thermofluids. 7-8, 7-8, 100021.

  Research output: Contribution to journal › Article

  Open Access

  • Particle size
  • Trajectories
  • Drag
  • Furnaces
  • Numerical models

• Einflussfaktoren auf die jährliche Elektrizitätserzeugung eines simulierten Solarturmkraftwerkes

  Sattler, E., Pechtl, P., Petek, J. & Hochenauer, C., 2013, In : VGB PowerTech. 9, p. 94-100

  Research output: Contribution to journal › Article

• Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation

  Preininger, M., Subotić, V., Stöckl, B., Schauperl, R., Reichholf, D., Megel, S., Kusnezoff, M. & Hochenauer, C., 1 Jun 2018, In : International Journal of Hydrogen Energy. 43, 27, p. 12398-12412 15 p.

  Research output: Contribution to journal › Article

  • solid electrolytes
  • Electrolysis
  • Electrolytes
  • impedance
  • electrolysis

• Evaluation of drag models for particles and powders with non-uniform size and shape

  Gerhardter, H., Prieler, R. J., Mayr-Mittermüller, B., Knoll, M., Mühlböck, M., Tomazic, P. & Hochenauer, C., 2018, In : Powder Technology. 330, p. 152-163

  Research output: Contribution to journal › Article

• Evaluation of Heat Pump Operation in a Large Scale Solar Thermal System

  Dröscher, A., Heinz, A., Gerardts, B., Schranzhofer, H., Heimrath, R. & Hochenauer, C., 2013, In : International journal of energy conversion. 1, 6, p. 266-277

  Research output: Contribution to journal › Article

• Experimental analysis of moisture transfer and phase change in porous insulation exposed to fire and its effect on heat transfer

  Prieler, R. J., Kitzmüller, P., Thumser, S., Schwabegger, G., Kaschnitz, E. & Hochenauer, C., 2020, In : International Journal of Heat and Mass Transfer. 160, 16 p., 120207.

  Research output: Contribution to journal › Article

  • Steam
  • moisture
  • insulation
  • Water vapor
  • water vapor

• Experimental and numerical investigation of shrinkage and warpage of a U-shaped injection molded part

  Kleindel, S., Eder, R., Schretter, H. & Hochenauer, C., 1 Mar 2016, In : International Polymer Processing. 31, 1, p. 68-81 14 p.

  Research output: Contribution to journal › Article

  • Fiber reinforced materials
  • Injection molding
  • Plastic parts
  • Nylons
  • Polyamides

• Experimental and Numerical Study of various MT-SOFC Flow Manifold Techniques: Single MT-SOFC Analysis

  Lawlor, V., Klein, K., Hochenauer, C., Griesser, S., Kuehn, S., Olabi, A-G., Cordiner, S. & Buchinger, G., 2013, In : Journal of Fuel Cell Science and Technology. 10, 1, p. 011003 -011003

  Research output: Contribution to journal › Article

• Experimental investigation and demonstration of pilot-scale combustion of oil-water emulsions and coal-water slurry with pronounced water contents at elevated temperatures with the use of pure oxygen

  Gaber, C., Wachter, P., Demuth, M. & Hochenauer, C., 15 Dec 2020, In : Fuel. 282, 118692.

  Research output: Contribution to journal › Article

  • Coal
  • Emulsions
  • Water content
  • Oils
  • Demonstrations

• Experimental investigation of the primary combustion zone during staged combustion of wood-chips in a commercial small-scale boiler

  Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., 2015, In : Biomass & Bioenergy. 81, p. 356-363

  Research output: Contribution to journal › Article

• Experimental investigation of thermochemical regeneration using oxy-fuel exhaust gases

  Gaber, C., Demuth, M., Prieler, R., Schluckner, C., Schroettner, H., Fitzek, H. & Hochenauer, C., 15 Feb 2019, In : Applied Energy. 236, p. 1115-1124 10 p.

  Research output: Contribution to journal › Article

  • Reforming reactions
  • Exhaust gases
  • regeneration
  • methane
  • carbon

• Experimental investigation of tri-reforming on a stationary, recuperative TCR-reformer applied to an oxy-fuel combustion of natural gas, using a Ni-catalyst

  Wachter, P., Gaber, C., Demuth, M. & Hochenauer, C., 1 Dec 2020, In : Energy. 212, 118719.

  Research output: Contribution to journal › Article

  • Natural Gas
  • Reforming reactions
  • Catalyst
  • Experimental Investigation
  • Combustion

• Experimental investigation on biomass shrinking and swelling behaviour: Particles pyrolysis and wood logs combustion

  Caposciutti, G., Almuina-Villar, H., Dieguez-Alonso, A., Gruber, T., Kelz, J., Desideri, U., Hochenauer, C., Scharler, R. & Anca-Couce, A., 2019, In : Biomass & Bioenergy. 123, April 2019, p. 1-13 13 p.

  Research output: Contribution to journal › Article

  • wood logs
  • pyrolysis
  • combustion
  • swelling
  • Swelling

• Extensive analysis of an SOC stack for mobile application in reversible mode under various operating conditions

  Preininger, M., Stöckl, B., Subotić, V. & Hochenauer, C., 10 Mar 2019, In : Electrochimica acta. 299, p. 692-707 16 p.

  Research output: Contribution to journal › Article

  • Oxides
  • Electrolysis
  • Fuel cells
  • Degradation
  • Gas fuel analysis

• Extensive analysis of large planar SOFC: Operation with humidified methane and carbon monoxide to examine carbon deposition based degradation

  Stöckl, B., Subotić, V., Reichholf, D., Schröttner, H. & Hochenauer, C., 4 Oct 2017, In : Electrochimica acta. 256, p. 325-336 11 p.

  Research output: Contribution to journal › Article

• Fast and accurate CFD-model for NOx emission prediction during oxy-fuel combustion of natural gas using detailed chemical kinetics

  Schluckner, C., Gaber, C., Landfahrer, M., Demuth, M. & Hochenauer, C., 15 Mar 2020, In : Fuel. 264, 116841.

  Research output: Contribution to journal › Article

  • Reaction kinetics
  • Natural gas
  • Computational fluid dynamics
  • Nitrogen
  • Oxygen

• Flame in flame: Oxipyr liquid fuel atomisation with oxygen

  Demuth, M., Spoljaric, D., Rauch, J., Potesser, M. & Hochenauer, C., 2013, In : Global cement magazine. July/Aug., p. 8-11

  Research output: Contribution to journal › Article

• Fractional-order model identification for state of health assessment of solid-oxide fuel cells

  Dolenc, B., Nusev, G., Subotić, V., Hochenauer, C., Gehring, N., Juricic, D. & Boskoski, P., 11 Oct 2018, In : IFAC-PapersOnLine. 51, 24, p. 849-854

  Research output: Contribution to journal › Article