Find Research Outputs

Search results

• 2016

  Low-temperature H2S removal for solid oxide fuel cell application with metal oxide adsorbents

  Weinländer, C., Neubauer, R. & Hochenauer, C., 7 Oct 2016, In : Adsorption Science & Technology. 35, 1-2, p. 120-136 16 p.

  Research output: Contribution to journal › Article

• Acid base interaction and its influence on the adsorption kinetics and selectivity order of aromatic sulfur heterocycles adsorbing on Ag-Al2O3

  Neubauer, R., Husmann, S. M., Weinländer, C., Kienzl, N., Leitner, E. & Hochenauer, C., 21 Oct 2016, In : Chemical Engineering Journal. 309, p. 840-849

  Research output: Contribution to journal › Article

  • Sulfur
  • sulfur
  • adsorption
  • Adsorption
  • kinetics
• 2017

  Adsorption mechanisms of sulfur heterocycles and the influence on the adsorption kinetics of Ag-Al2O3

  Neubauer, R., Weinländer, C., Kienzl, N. & Hochenauer, C., Mar 2017.

  Research output: Contribution to conference › Poster

• Thermal in Situ and System-Integrated Regeneration Strategy for Adsorptive On-Board Desulfurization Units

  Neubauer, R., Kienzl, N., Bitschnau, B., Schröttner, H. & Hochenauer, C., 19 Oct 2017, In : Energy & fuels. 31, 11

  Research output: Contribution to journal › Article

  • Desulfurization
  • Adsorbents
  • Adsorption
  • Gases
  • Solid oxide fuel cells (SOFC)

• CFD modelling and performance increase of a pusher type reheating furnace using oxy-fuel burners

  Mayr, B., Prieler, R., Demuth, M., Moderer, L. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 462-468 7 p.

  Research output: Contribution to journal › Article

  • Fuel burners
  • Computational fluid dynamics
  • Furnaces
  • Air
  • Productivity
• 2013

  ECR Energy City Graz-Reininghaus

  Rainer, E., Hofbauer, C., Schnitzer, H., Mach, T., Maier, S., Hochenauer, C., Passer, A., Kreiner, H., Maydl, P., Fickert, L. & Wieland, T., 2013, FULL Papers of the International conference on Sustainable Buildings – Construction Products & Technologies. Graz: Verlag der Technischen Universität Graz, p. 617-628

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2020

  Numerical model incorporating different oxidizer in a reheating furnace fired with natural gas

  Landfahrer, M., Schluckner, C., Gerhardter, H., Zmek, T., Klarner, J. & Hochenauer, C., 15 May 2020, In : Fuel. 268, 117185.

  Research output: Contribution to journal › Article

  • Numerical models
  • Natural gas
  • Furnaces
  • Combustion chambers
  • Fuel burners
• 2012

  Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology

  Olbrich, M., Zitzenbacher, G., Hochenauer, C., Kneidinger, C. & Lawlor, V., 2012, In : Macromolecular Symposia. 311, 1, p. 83-91

  Research output: Contribution to journal › Article
• 2015

  Numerical Modeling of Oxygen Enhanced Combustion and Transient Heating Characteristics in a Reheating Furnace

  Prieler, R. J., Belohradsky, P., Mayr, B., Demuth, M. & Hochenauer, C., 2015, Australian Combustion Symposium 2015 Proceedings. ., p. 236-239

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File
• 2020

  In-flame spheroid formation from non-spherical slag particles – A numerical and experimental study

  Gerhardter, H., Knoll, M., Raic, J., Prieler, R. J., Landfahrer, M., Hochenauer, C., Tomazic, P. & Schröttner, H., Apr 2020, In : International Journal of Heat and Mass Transfer. 151, 119412.

  Research output: Contribution to journal › Article

  • slags
  • spheroids
  • Slags
  • flames
  • Surface tension

• Effects on numerical calculations of in-flight particle trajectories and temperatures considering multiple particle size and shape

  Knoll, M., Gerhardter, H., Prieler, R. J., Hochenauer, C., Tomazic, P. & Schröttner, H., 1 Nov 2020, In : International Journal of Thermofluids. 7-8, 7-8, 100021.

  Research output: Contribution to journal › Article

  Open Access

  • Particle size
  • Trajectories
  • Drag
  • Furnaces
  • Numerical models

• High temperature electrochemical production of hydrogen

  Subotić, V. & Hochenauer, C., 2020, Current Trends and Future Developments on (Bio-) Membranes: Membrane Systems for Hydrogen Production. Basile, A. & Napporn, T. W. (eds.). Elsevier USA, p. 203-227

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • coal
  • hydrogen
  • water
  • hydrogen fuels
  • heat

• Sector Coupling Potentials of a 5th Generation District Heating Network

  Edtmayer, H., Heimrath, R., Nageler, P. J., Mach, T. & Hochenauer, C., 6 Oct 2020, 6th International Conference on Smart Energy Systems: Book of Abstracts. Lund, H. (ed.). Aalborg Universitetsforlag, p. 52-52 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Critical investigations into the informative value of process challenge devices for narrow lumens used in small steam sterilisers

  Burian, P. J., Feurhuber, M., Miranda, M., Magno, M. & Hochenauer, C., 2020, In : Zentralsterilisation. 28, 2, p. 104-111 8 p.

  Research output: Contribution to journal › Article

• Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis

  Subotić, V., Königshofer, B., Juričić, Đ., Kusnezoff, M., Schröttner, H., Hochenauer, C. & Boškoski, P., 15 Dec 2020, In : Energy Conversion and Management. 226, 113509.

  Research output: Contribution to journal › Article

  • Relaxation time
  • Electrolysis
  • Oxides
  • Fuel cells
  • Solid oxide fuel cells (SOFC)
• 2017

  In-operando Detection of Carbon Depositions and Carbon Formation Predictions for Industrial-Sized SOFCs Fueled with Synthetic Diesel Reformate

  Subotić, V., Schluckner, C., Stöckl, B., Reichholf, D., Lawlor, V., Pofahl, S., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2451-2460 10 p.

  Research output: Contribution to journal › Article
• 2019

  Ammonia2Power project - Ammonia gas recovery via VMD for fuel cells

  Guillen-Burrieza, E., Stöckl, B., Hochenauer, C., Tahir, A. J., Platzer, C. & Brunner, C., 6 Jun 2019.

  Research output: Contribution to conference › Poster
• 2020

  Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance

  Pongratz, G., Subotić, V., Schroettner, H., Stoeckl, B., Hochenauer, C., Anca-Couce, A. & Scharler, R., 16 Apr 2020, In : Biomass Conversion and Biorefinery. 19 p.

  Research output: Contribution to journal › Article

  Open Access

  • Solid oxide fuel cells (SOFC)
  • Gasification
  • Biomass
  • Gas fuels
  • Gases
• 2019

  High Utilization of Humidified Ammonia and Methane in Solid Oxide Fuel Cells: An Experimental Study of Performance and Stability

  Stöckl, B., Preininger, M., Subotić, V., Gaber, C. E., Seidl, M., Sommersacher, P., Schröttner, H. & Hochenauer, C., 17 Jul 2019, In : Journal of the Electrochemical Society.

  Research output: Contribution to journal › Article

  Open Access
• 2016

  Recent advances in reaction mechanisms and multi-scale modelling of biomass pyrolysis

  Anca-Couce, A., Scharler, R., Mehrabian Bardar, R. & Hochenauer, C., 2016, p. 154.

  Research output: Contribution to conference › Abstract
• 2020

  Co-simulation Workflow for the Dynamic Modelling and Simulation of Large-scale District Energy Systems

  Nageler, P. J., Schweiger, G., Schranzhofer, H., Heimrath, R., Mach, T., Fochler, L-M., Hochenauer, C., Fluch, J., Leusbrock, I. & Fink, C., 2020, Proceedings of Building Simulation 2019: 16th Conference of IBPSA. International Building Performance Simulation Association, p. 3698-3705 8 p. BS2019_211048

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Global warming
  • Pipe
  • Computer simulation
  • Temperature

• Performance assessment of industrial-sized solid oxide cells operated in a reversible mode: Detailed numerical and experimental study

  Subotić, V., Thaller, T., Königshofer, B., Menzler, N. H., Bucher, E., Egger, A. & Hochenauer, C., 30 Oct 2020, In : International Journal of Hydrogen Energy. 45, 53, p. 29166-29185 20 p.

  Research output: Contribution to journal › Article

  Open Access

  • Oxides
  • oxides
  • cells
  • performance prediction
  • counterflow

• Correction to: Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance (Biomass Conversion and Biorefinery, (2020), 10.1007/s13399-020-00726-w)

  Pongratz, G., Subotić, V., Schroettner, H., Stoeckl, B., Hochenauer, C., Anca-Couce, A. & Scharler, R., 1 Jan 2020, (Accepted/In press) In : Biomass Conversion and Biorefinery.

  Research output: Contribution to journal › Comment/debate

  Open Access

  • Solid oxide fuel cells (SOFC)
  • Gasification
  • Biomass
  • Gases
• 2016

  Novel CFD approach for the thermal analysis of a continuous variable transmission (CVT)

  Wurm, J., Fitl, M., Gumpesberger, M., Väisänen, E. & Hochenauer, C., 20 Apr 2016, In : Applied Thermal Engineering. 103, p. 159 -169 10 p.

  Research output: Contribution to journal › Article

  Open Access

  • Thermoanalysis
  • Computational fluid dynamics
  • Pulleys
  • Fuel economy
  • Numerical models

• Comparison of dolomite and lime as sorbents for in-situ H2S removal with respect to gasification parameters in biomass gasification

  Husmann, S. M., Zuber, C., Maitz, V., Kienberger, T. & Hochenauer, C., 2016, In : Fuel. 181, p. 131-138 8 p.

  Research output: Contribution to journal › Article

  • Sorbents
  • Gasification
  • Lime
  • Biomass
  • Calcium Carbonate
• 2020

  Fast and accurate CFD-model for NOx emission prediction during oxy-fuel combustion of natural gas using detailed chemical kinetics

  Schluckner, C., Gaber, C., Landfahrer, M., Demuth, M. & Hochenauer, C., 15 Mar 2020, In : Fuel. 264, 116841.

  Research output: Contribution to journal › Article

  • Reaction kinetics
  • Natural gas
  • Computational fluid dynamics
  • Nitrogen
  • Oxygen

• Experimental analysis of moisture transfer and phase change in porous insulation exposed to fire and its effect on heat transfer

  Prieler, R. J., Kitzmüller, P., Thumser, S., Schwabegger, G., Kaschnitz, E. & Hochenauer, C., 2020, In : International Journal of Heat and Mass Transfer. 160, 16 p., 120207.

  Research output: Contribution to journal › Article

  • Steam
  • moisture
  • insulation
  • Water vapor
  • water vapor
• 2019

  Integration of an adsorptive desulfurization unit into an SOFC-based auxiliary power unit operated with diesel fuel

  Neubauer, R., Kienzl, N. & Hochenauer, C., 1 Jan 2019, In : Chemical Engineering Research and Design. 141, p. 47-55 9 p.

  Research output: Contribution to journal › Article

  • Desulfurization
  • Diesel fuels
  • Solid oxide fuel cells (SOFC)
  • Adsorbents
  • Gases
• 2015

  Verbrennungssimulation - Ofenmodellierung und Fehlerquellen

  Prieler, R. J., Mayr, B. & Hochenauer, C., 15 Oct 2015.

  Research output: Contribution to conference › (Old data) Lecture or Presentation
• 2013

  Analysis of the thermal behavior of historical box type windows for renovation concepts with CFD

  Brandl, D., Mach, T., Grobbauer, M., Ruisinger, U. & Hochenauer, C., 2013, Sustainable Buildings, Construction Products and Technologies. Graz: Verlag der Technischen Universität Graz, p. 181-194

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2015

  Numerical Modelling of Oxygen Enhanced Combustion and Transient Heating Characteristics in a Reheating Furnace

  Prieler, R. J., Belohradsky, P., Mayr, B., Demuth, M. & Hochenauer, C., 7 Dec 2015.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

• CFD-Simulationen von verschiedenen Industrieöfen

  Mayr, B., Prieler, R. J. & Hochenauer, C., 15 Oct 2015.

  Research output: Contribution to conference › (Old data) Lecture or Presentation
• 2017

  The use of open sorption technology for heat recovery in biomass combustion applications

  Höftberger, E., Riepl, R., Hebenstreit, B., Golicza, L., Paar, K., Goritschnig, M., Zweiler, R. & Hochenauer, C., 1 Jun 2017, In : European Biomass Conference and Exhibition Proceedings. 2017, 25thEUBCE, p. 648-652 5 p.

  Research output: Contribution to journal › Article

  • District heating
  • Waste heat utilization
  • combustion
  • sorption
  • Sorption
• 2015

  PCC-pilot plant tests with aqueous piperazine

  Rabensteiner, M., Kinger, G., Koller, M. & Hochenauer, C., 2015.

  Research output: Contribution to conference › Poster
• 2013

  Einflussfaktoren auf die jährliche Elektrizitätserzeugung eines simulierten Solarturmkraftwerkes

  Sattler, E., Pechtl, P., Petek, J. & Hochenauer, C., 2013, In : VGB PowerTech. 9, p. 94-100

  Research output: Contribution to journal › Article
• 2019

  Detailed experimental investigation of the spatially distributed gas release and bed temperatures in fixed-bed biomass combustion with low oxygen concentration

  Archan, G., Anca-Couce, A., Gregorc, J., Buchmayr, M., Hochenauer, C., Gruber, J. & Scharler, R., 1 Jan 2019, In : European Biomass Conference and Exhibition Proceedings. p. 447-453 7 p.

  Research output: Contribution to journal › Conference article

  • combustion
  • Biomass
  • Flue gases
  • gases
  • oxygen
• 2016

  Determination of the Combustion Behaviour of 2nd Generation Biomass Fuels

  Kelz, J., Retschitzegger, S., Hitzl, M., Francescato, V. & Hochenauer, C., 2016, Proceedings 24th European Biomass Conference and Exhibition, 6-9 June 2016, Amsterdam, The Netherlands. p. 674 - 677

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ashes
  • Biomass
  • Coal carbonization
  • Carbonization
  • Gas emissions

• Development of a novel CFD method for accurate heat transfer analysis of continuous variable transmissions (CVT)

  Wurm, J., Hochenauer, C. & Fitl, M., 18 Oct 2016.

  Research output: Contribution to conference › (Old data) Lecture or Presentation

  • Computational fluid dynamics
  • Heat transfer
  • Pulleys
  • Temperature
  • Rotating disks
• 2013

  Flame in flame: An approved Oxipyr technology to increase the solid alternative waste throughput by liquid fuel atomization with oxygen

  Demuth, M. (ed.), Spoljaric, D. (ed.), Rauch, J. (ed.), Potesser, M. (ed.) & Hochenauer, C. (ed.), 2013, .

  Research output: Book/Report › Anthology
• 2015

  Integration of Oxidative Honeycomb Catalysts in Firewood Stoves

  Reichert, G. (ed.), Schmidl, C. (ed.), Stressler, H. (ed.), Sturmlechner, R. (ed.), Haslinger, W. (ed.) & Hochenauer, C. (ed.), 2015, .

  Research output: Book/Report › Anthology
• 2019

  Development of a spatially and timely resolved CFD model of a steam sterilizer to predict the load temperature and the theoretical inactivation of bacteria based on sterilization parameters

  Feurhuber, M., Burian, P., Magno, M., Miranda, M. & Hochenauer, C., 1 Dec 2019, In : Physics in Medicine. 8, 100020.

  Research output: Contribution to journal › Article

  Open Access

  • Sterilizers
  • Steam
  • charge flow devices
  • steam
  • deactivation

• Generation Tool for Automated Thermal City Modelling

  Nageler, P. J., Mach, T., Heimrath, R., Schranzhofer, H. & Hochenauer, C., 25 Jan 2019, In : Applied Mechanics and Materials . 887, p. 292 - 299 8 p.

  Research output: Contribution to journal › Article

  • Heating
  • Program processors
  • Automation
  • Geometry
  • Hot Temperature
• 2013

  Analysis of Natural Convection and Heat Transfer for Traditional Box Type Windows

  Brandl, D., Mach, T., Grobbauer, M., Ruisinger, U. & Hochenauer, C., 2013, In : International journal of energy conversion. 1, 6, p. 278-287

  Research output: Contribution to journal › Article
• 2015

  CFD and experimental analysis of a 115 kW natural gas fired lab-scale furnace under oxy-fuel and air–fuel conditions

  Mayr, B., Prieler, R. J., Demuth, M., Potesser, M. & Hochenauer, C., 2015, In : Fuel. 159, p. 864-875

  Research output: Contribution to journal › Article

  • Natural gas
  • Computational fluid dynamics
  • Furnaces
  • Heat flux
  • Oxygen
• 2019

  CFD simulation of the inactivation of Geobacillus stearothermophilus on dental handpieces

  Feurhuber, M., Burian, P. J., Magno, M., Miranda, M. & Hochenauer, C., Sep 2019, In : International Journal of Heat and Mass Transfer. 144, 17 p., 118649.

  Research output: Contribution to journal › Article

• Single large wood log conversion in a stove: Experiments and modelling

  Anca-Couce, A., Caposciutti, G., Gruber, T., Kelz, J., Bauer, T., Hochenauer, C. & Scharler, R., 1 Dec 2019, In : Renewable energy. 143, p. 890-897 8 p.

  Research output: Contribution to journal › Article

  • Stoves
  • Wood
  • Experiments
  • Flue gases
  • Quenching
• 2017

  Prediction of the fluid flow, heat transfer and inactivation of microorganism at medical devices in modern steam sterilizers using computational fluid dynamics

  Feurhuber, M., Cattide, A., Magno, M., Miranda, M., Prieler, R. J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 127, p. 1391-1403 13 p.

  Research output: Contribution to journal › Article

• Comparison between solid body and gas radiation in high temperature furnaces under different oxygen enrichments

  Mayr-Mittermüller, B., Prieler, R. J., Demuth, M. & Hochenauer, C., 25 Dec 2017, In : Applied Thermal Engineering. 127, p. 679-688

  Research output: Contribution to journal › Article
• 2016

  beReal Development of a New Test Method for Firewood Roomheaters Reflecting Real Life Operation

  Reichert, G., Hartmann, H., Haslinger, W., Oehler, H., Schmidl, C., Schwabl, M., Stressler, H., Sturmlechner, R. & Hochenauer, C., 2016, 24th European Biomass Conference and Exhibition.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental and numerical investigation of shrinkage and warpage of a U-shaped injection molded part

  Kleindel, S., Eder, R., Schretter, H. & Hochenauer, C., 1 Mar 2016, In : International Polymer Processing. 31, 1, p. 68-81 14 p.

  Research output: Contribution to journal › Article

  • Fiber reinforced materials
  • Injection molding
  • Plastic parts
  • Nylons
  • Polyamides