Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Annette Mütze
2011

Radio-frequency-based detection of electrical discharge machining bearing currents

Ahola, J., Särkimäki, V., Mütze, A. & Tamminen, J., 2011, In : IET electric power applications. 5, 4, p. 386-392

Research output: Contribution to journalArticle

2016

Discussion of machine placement and integration on the thermal design of HEV IPM machines

Paar, C. J. & Mütze, A., 31 Jul 2016, Transportation Electrification Conference and Expo (ITEC), 2016 IEEE.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Supporting unbalanced grids with induction machine drives by inverters without intermittent energy storage

Krischan, K., Seebacher, R. & Mütze, A., 2011, Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Determination of Original Non-Degraded and Fully Degraded B-H-Curves from Measurements of Material Submitted to Punching

Bali, M. S. J. & Mütze, A., 2014, Proceedings of the Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 2-3-2-3

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influences of CO2 and FKL-laser cutting as well as mechanical cutting on the magnetic properties of electric steel sheets determined by Epstein frame and stator lamination stack measurements

Bali, M. & Muetze, A., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 1443-1450 8 p. 6953562

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Measurement of stator core magnetic characteristics

Clerc, A. J. & Mütze, A., 2011, Proc. of the 7th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1433-1438

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. & Mütze, A., 2016, Applied Power Electronics Conference and Exposition. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Electric machine utilization during the post-fault operation after inverter open circuit faults

Eickhoff, H., Strangas, E. G. & Mütze, A., 2017, Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Institute of Electrical and Electronics Engineers, p. 201-207 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Development and evaluation of control and power hardware for a line side PWM current source inverter

Krischan, K., Wiltberger, W. & Mütze, A., 2013, Proceedings of the EPE'13 ECCE Europe, 15th European Conference on Power Electronics and Applications. ., p. P.1-P.10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

An analysis into bridgeless inverted buck-boost PFC with ZVS capabilities

Leong, K. K. & Mütze, A., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. J. & Mütze, A., 20 Mar 2016.

Research output: Contribution to conferencePoster

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePoster

2017
2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2014, Proceedings of the IEEE Energy Conversion Congress and Exhibition ECCE 2014. ., p. 3266-3271

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016. 10 p.

Research output: Contribution to conferencePoster

Enhanced and fast detection of open circuit faults in inverters for electric drives

Eickhoff, H., Seebacher, R., Mütze, A. & Strangas, E., 2016, Proceedings of 2016 IEEE Transportation Electrification Conference and Expo (ITEC) . Institute of Electrical and Electronics Engineers, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters

Niskanen, V., Mütze, A. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 5, p. 3438 3447 p.

Research output: Contribution to journalArticle

2012
2016

Efficiency Enhancement of a Three Phase Soft Switching Inverter Under Light Load Conditions

Mahafzah, K. A. A. K., Krischan, K. & Mütze, A., Oct 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. p. 3378-3383 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
2018

Smooth Reference Modulation to Improve Dynamic Response in Electric Drive Systems

Yazdanian, M., Mehrizi-Sani, A., Seebacher, R., Krischan, K. & Muetze, A., Jul 2018, In : IEEE Transactions on Power Electronics. 33, 7, p. 6434-6443 10 p.

Research output: Contribution to journalArticle

Full-Size Converter Operation of Large Hydro Power Generators: Generator Design Aspects

Holzer, T. & Muetze, A., 6 Dec 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE). p. 7363-7368

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017
2018

Magnetostriction of Electrical Steel and Its Relation to the No-Load Noise of Power Transformers

Tanzer, T., Pregartner, H., Riedenbauer, M., Labinsky, R., Witlatschil, M., Muetze, A. & Krischan, K., 1 Sep 2018, In : IEEE Transactions on Industry Applications. 54, 5, p. 4306-4314 9 p., 8367848.

Research output: Contribution to journalArticle

2014

Inverter device nonlinearity characterization technique for use in a motor drive system

Babel, A., Mütze, A., Seebacher, R., Krischan, K. & Strangas, E., 2014, IEEE Applied Power Electronics Conference and Exposition. ., p. 2767-2774

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Comparison of Induction and Synchronous Reluctance Machine Based Actuators for Elevated Temperature Environments

Lang, K., Mütze, A., Bauer, R. & Stefan, P., 2016, In : IEEE Transactions on Energy Conversion. 31, 3, p. 1012-1022

Research output: Contribution to journalArticle

2018
2016

Minimization of the Synrel’s Oscillating Torque by Calculation of the Appropriate Skew Angle

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., 2016, Proceedings : XXIV Symposium Electromagnetic Phenomena in Nonlinear Circuits: June 28 - July 1, 2016, Helsinki, Finland : EPNC 2016. Helsinki: Aalto University, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe). p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePoster

2016

Thermal performance modeling of foil wound concentrated coils in electric machines

Rios, M. & Mütze, A., Sep 2016, p. 1-8.

Research output: Contribution to conferencePoster

2013

A power supply reaching titanium level efficiency for a wide range of input voltages

Konrad, W., Rainer, C., Deboy, G. & Mütze, A., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 3398-3405

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers

Leitner, S., Yazdanian, M., Mehrizi-Sani, A. & Mütze, A., 2017.

Research output: Contribution to conferencePoster

Christian Doppler Laboratory for Brushless Drives for Pump and Fan Applications

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePoster

2020
Open Access
2019

Cogging Torque Minimization and Performance of the Sub-Fractional HP BLDC Claw-Pole Motor

Leitner, S., Grübler, H. & Muetze, A., 18 Jun 2019, In : IEEE Transactions on Industry Applications. 2019, vol. 55, no. 5, p. 4653-4664 12 p.

Research output: Contribution to journalArticle

Open Access

Hidden Noise Surfacing

Muetze, A., Hofmann, S. & Leitner, S., Oct 2019, Transportation Electrification eNewsletter, 2019, Oktober.

Research output: Contribution to specialist publicationFeatured article

Innovative Low-Cost Sub-Fractional HP BLDC Claw-Pole Machine Design for Fan Applications

Leitner, S., Grübler, H. & Muetze, A., 9 Jan 2019, In : IEEE Transactions on Industry Applications. 2019, vol. 55, no. 3, p. 2558-2568 11 p., 8606100.

Research output: Contribution to journalArticle

2018

Loss-Surface-Based Iron Loss Prediction for Fractional Horsepower Electric Motor Design

Gruebler, H., Krall, F., Leitner, S. & Muetze, A., 30 Oct 2018, 2018 20th European Conference on Power Electronics and Applications, EPE 2018 ECCE Europe. Institute of Electrical and Electronics Engineers, 8515633

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Study of incipient bearing damage monitoring in variable speed drive systems

Romanenko, A., Ahola, J., Mütze, A. & Niskanen, V., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Studies of the contribution of alternating electromagnetic fields toward material fatigue in 100Cr6

Holweger, W., Wolf, M., Walther, F., Trojahn, W., Mütze, A., Kunzmann, J., Schreiber, J., Mayer, J. & Reichelt, M., 2012, In : Industrial lubrication and tribology. 64, 5, p. 247-252

Research output: Contribution to journalArticle

2016

Influence of different cutting techniques on the magnetic characteristics of electrical steels determined by a remagraph

Bali, M. & Muetze, A., 16 Feb 2016, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 1190-1196 7 p. 7409212

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Consideration of steel degradation due to punching in finite element modeling of electric machines

Bali, M. S. J., De Gersem, H. & Mütze, A., 2012, Proceedings XXIIth Symposium EPNC Electromagnetic Phenomenon in Nonlinear Circuits. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Normalization-based approach to electric motor BVR related capacitances computation

Ahola, J., Muetze, A., Niemela, M. & Romanenko, A., 18 Apr 2018, APEC 2018 - 33rd Annual IEEE Applied Power Electronics Conference and Exposition. Institute of Electrical and Electronics Engineers, Vol. 2018-March. p. 2868-2874 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Post-fault operation strategy for single switch open circuit faults in electric drives

Eickhoff, H., Seebacher, R., Mütze, A. & Strangas, E., 2016, Proceedings 2016 IEEE Energy Conversion Congress and Exposition (ECCE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution