Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Annette Mütze
2018

Magnetostriction of Electrical Steel and Its Relation to the No-Load Noise of Power Transformers

Tanzer, T., Pregartner, H., Riedenbauer, M., Labinsky, R., Witlatschil, M., Muetze, A. & Krischan, K., 1 Sep 2018, In : IEEE Transactions on Industry Applications. 54, 5, p. 4306-4314 9 p., 8367848.

Research output: Contribution to journalArticle

Full-Size Converter Operation of Large Hydro Power Generators: Generator Design Aspects

Holzer, T. & Muetze, A., 6 Dec 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE). p. 7363-7368

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Influence of electric discharge activity on bearing lubricating grease degradation

Romanenko, A., Mütze, A. & Ahola, J., 2015, IEEE Energy Conversion Congress and Exposition. ., p. 4851-4856

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012
2015

Fault behavior calculation of high efficient single phase induction machines using 2-D transient FEM

Bacher, J. P., Grabner, C. & Mütze, A., 2015, Proceedings 20th Conference on the Computation of Electromagnetic Fields (COMPUMAG). ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017
2015

Determination of the influences of different lamination steel cutting techniques on the steel’s BH-curves determined by means of a remagraph

Bali, M. S. J. & Mütze, A., 2015, IEEE International Electric Machines & Drives Conference. ., p. 1190-1196

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Inverter device nonlinearity characterization technique for use in a motor drive system

Babel, A., Mütze, A., Seebacher, R., Krischan, K. & Strangas, E., 2014, IEEE Applied Power Electronics Conference and Exposition. ., p. 2767-2774

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Smooth Reference Modulation to Improve Dynamic Response in Electric Drive Systems

Yazdanian, M., Mehrizi-Sani, A., Seebacher, R., Krischan, K. & Muetze, A., Jul 2018, In : IEEE Transactions on Power Electronics. 33, 7, p. 6434-6443 10 p.

Research output: Contribution to journalArticle

2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2014, Proceedings of the IEEE Energy Conversion Congress and Exhibition ECCE 2014. ., p. 3266-3271

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influences of CO2 and FKL-laser cutting as well as mechanical cutting on the magnetic properties of electric steel sheets determined by Epstein frame and stator lamination stack measurements

Bali, M. & Muetze, A., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 1443-1450 8 p. 6953562

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of Original Non-Degraded and Fully Degraded B-H-Curves from Measurements of Material Submitted to Punching

Bali, M. S. J. & Mütze, A., 2014, Proceedings of the Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 2-3-2-3

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development and evaluation of control and power hardware for a line side PWM current source inverter

Krischan, K., Wiltberger, W. & Mütze, A., 2013, Proceedings of the EPE'13 ECCE Europe, 15th European Conference on Power Electronics and Applications. ., p. P.1-P.10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

An analysis into bridgeless inverted buck-boost PFC with ZVS capabilities

Leong, K. K. & Mütze, A., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Electric machine utilization during the post-fault operation after inverter open circuit faults

Eickhoff, H., Strangas, E. G. & Mütze, A., 2017, Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Institute of Electrical and Electronics Engineers, p. 201-207 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Design Constraints of Small Single-Phase Permanent Magnet Brushless DC Drives for Fan Applications

Dunkl, S., Muetze, A. & Schoener, G., 1 Jul 2015, In : IEEE Transactions on Industry Applications. 51, 4, p. 3178-3186 9 p., 07047873.

Research output: Contribution to journalArticle

Epstein frame measurement based determination of original non-degraded and fully degraded magnetic properties of material submitted to mechanical cutting

Bali, M. S. J., De Gersem, H. & Mütze, A., 2015, IEEE International Electric Machines & Drives Conference. ., p. 1184-1189

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Radio-frequency-based detection of electrical discharge machining bearing currents

Ahola, J., Särkimäki, V., Mütze, A. & Tamminen, J., 2011, In : IET electric power applications. 5, 4, p. 386-392

Research output: Contribution to journalArticle

2014

Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters

Niskanen, V., Mütze, A. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 5, p. 3438 3447 p.

Research output: Contribution to journalArticle

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Measurement of stator core magnetic characteristics

Clerc, A. J. & Mütze, A., 2011, Proc. of the 7th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1433-1438

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Supporting unbalanced grids with induction machine drives by inverters without intermittent energy storage

Krischan, K., Seebacher, R. & Mütze, A., 2011, Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Thermal Real-Time Monitoring of a Gearbox Integrated Electric Rear Axle Drive for Hybrid Electric Traction

Paar, C. J. & Mütze, A., 2015, Proceedings of the IEEE Transportation Electrification Conference and Expo 2015. ., p. TS4-2-1-TS4-2-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePoster

2018
2013

A power supply reaching titanium level efficiency for a wide range of input voltages

Konrad, W., Rainer, C., Deboy, G. & Mütze, A., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 3398-3405

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2020
Open Access

Christian Doppler Laboratory for Brushless Drives for Pump and Fan Applications

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePoster

Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers

Leitner, S., Yazdanian, M., Mehrizi-Sani, A. & Mütze, A., 2017.

Research output: Contribution to conferencePoster

2018

Loss-Surface-Based Iron Loss Prediction for Fractional Horsepower Electric Motor Design

Gruebler, H., Krall, F., Leitner, S. & Muetze, A., 30 Oct 2018, 2018 20th European Conference on Power Electronics and Applications, EPE 2018 ECCE Europe. Institute of Electrical and Electronics Engineers, 8515633

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

Cogging Torque Minimization and Performance of the Sub-Fractional HP BLDC Claw-Pole Motor

Leitner, S., Grübler, H. & Muetze, A., 18 Jun 2019, In : IEEE Transactions on Industry Applications. 2019, vol. 55, no. 5, p. 4653-4664 12 p.

Research output: Contribution to journalArticle

Open Access

Innovative Low-Cost Sub-Fractional HP BLDC Claw-Pole Machine Design for Fan Applications

Leitner, S., Grübler, H. & Muetze, A., 9 Jan 2019, In : IEEE Transactions on Industry Applications. 2019, vol. 55, no. 3, p. 2558-2568 11 p., 8606100.

Research output: Contribution to journalArticle

Hidden Noise Surfacing

Muetze, A., Hofmann, S. & Leitner, S., Oct 2019, Transportation Electrification eNewsletter, 2019, Oktober.

Research output: Contribution to specialist publicationFeatured article

2017

Foil conductor concentrated coil windings for modular permanent magnet AC machines

Rios, M., Venkataramanan, G. & Mütze, A., Oct 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE Xplore, p. 1191 - 1196 (IEEE Energy Conversion Congress and Exposition (ECCE)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Efficiency Determination of Inverter-Fed Induction Machines and the Impacts of the Inverter Supply

Bacher, J. P., Strauss, S. & Muetze, A., 19 Jun 2018, SPEEDAM 2018 – Proceedings. p. 902-907 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Study of incipient bearing damage monitoring in variable speed drive systems

Romanenko, A., Ahola, J., Mütze, A. & Niskanen, V., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Finite-element supported transmission-line models for calculating high-frequency effects in machine windings

De Gersem, H. & Mütze, A., 2011, Conference on the Computation of Electromagnetic Fields. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2015, In : IEEE Transactions on Industry Applications. 51, 5, p. 3914-3922

Research output: Contribution to journalArticle

2012

Studies of the contribution of alternating electromagnetic fields toward material fatigue in 100Cr6

Holweger, W., Wolf, M., Walther, F., Trojahn, W., Mütze, A., Kunzmann, J., Schreiber, J., Mayer, J. & Reichelt, M., 2012, In : Industrial lubrication and tribology. 64, 5, p. 247-252

Research output: Contribution to journalArticle

2015

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2015, In : IEEE Transactions on Industry Applications. 51, 4, p. 3178-3186

Research output: Contribution to journalArticle

2018

Normalization-based approach to electric motor BVR related capacitances computation

Ahola, J., Muetze, A., Niemela, M. & Romanenko, A., 18 Apr 2018, APEC 2018 - 33rd Annual IEEE Applied Power Electronics Conference and Exposition. Institute of Electrical and Electronics Engineers, Vol. 2018-March. p. 2868-2874 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Consideration of steel degradation due to punching in finite element modeling of electric machines

Bali, M. S. J., De Gersem, H. & Mütze, A., 2012, Proceedings XXIIth Symposium EPNC Electromagnetic Phenomenon in Nonlinear Circuits. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Design of PM free brushless AC machine based actuators for elevated temperature environments

Lang, K., Muetze, A., Bauer, R. & Rossegger, W., 2015, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 696-702 7 p. 7409135

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3-D FEM calculation of electromagnetic properties of single-phase induction machines

Bacher, J., Muetze, A. & Waldhart, F., 2015, In : IEEE Transactions on Energy Conversion. 30, 1, p. 142-149 8 p., 6894206.

Research output: Contribution to journalArticle

2011

Influence of motor operating parameters on discharge bearing current activity

Mütze, A., Tamminen, J. & Ahola, J., 2011, In : IEEE Transactions on Industry Applications. 47, 4, p. 1767-1777

Research output: Contribution to journalArticle