Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Christof Sommitsch
2015

Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss

Hadžić, S., Hanus, R. & Sommitsch, C., 23 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or Presentation

2012

Grain growth during annealing: experiments and modelling

Candic, M., Tian, B. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 611-616

Research output: Contribution to journalArticle

2013

Study of Creep damage in a 10.86% Cr Heat Resistant Steel using Synchrotron X-ray Microtomography

Gupta, C., Toda, H., Schlacher, C., Mayr, P., Sommitsch, C., Uesugi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Advanced Materials Research. 794, p. 476-483

Research output: Contribution to journalArticle

2012

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2012, Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 344-351

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 12 May 2014.

Research output: Contribution to conference(Old data) Lecture or Presentation

2011

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

2015

Improvement of the corrosion behaviour of AZ91 via friction stir processing

Huemer, W., Hahn, C., Hütter, A., Valiant, R. & Sommitsch, C., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 1156-1165 10 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on governing parameters of thermal history during underwater friction stir welding

Papahn, H., Bahemmat, P., Haghpanahi, M. & Sommitsch, C., 1 May 2015, In : International Journal of Advanced Manufacturing Technology. 78, 5-8, p. 1101-1111 11 p.

Research output: Contribution to journalArticle

2013

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 5 May 2013.

Research output: Contribution to conference(Old data) Lecture or Presentation

2012

Numerical and experimental investigation of laser assisted side milling of Ti6A14v alloy

Zamani, H., Hermani, J. P., Sonderegger, B. & Sommitsch, C., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1526-1533 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaper

2019

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017
Open Access
2014

Failure modes for total ankle arthroplasty: a statistical analysis of the Norwegian Arthroplasty Register

Sadoghi, P., Roush, G., Kastner, N., Leithner, A., Sommitsch, C. & Goswami, T., 2014, In : Archives of Orthopaedic and Trauma Surgery. 134, p. 1361-1368

Research output: Contribution to journalArticle

Investigation of the Al3(Sc,Zr) precipitation behavior of a novel AlMgScZr alloy

Tändl, J., Palm, F., Anders, K., Poletti, M. C. & Sommitsch, C., 25 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or Presentation

2019
2014

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels

Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.

Research output: Contribution to conferencePoster

2015

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or Presentation

2012

A simple FE approach to study microstructural influences in power-law creep

Pein, C. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 73-76

Research output: Contribution to journalArticle

2016
Open Access
2019

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Prodinger, D., Poletti, M. C., Sommitsch, C., Huber, D. & Stockinger, M., 2014, In : Key Engineering Materials . 611-612, p. 99-105

Research output: Contribution to journalArticle

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePoster

2015

Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding

Gao, Z., Wang, P., Cheng, D., Niu, J. & Sommitsch, C., 2015, In : Engineering Review. Vol. 35, Issue 3, p. 283-289

Research output: Contribution to journalArticle

File
2014

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 15 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or Presentation

2011

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

2012

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 24 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or Presentation

2014

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Stojan, V., Coline, B., Christof, S., Farooq, M., Rolf, S. & Joanna, Z., 1 Jan 2014, p. 1163-1172. 10 p.

Research output: Contribution to conferencePaper

2011

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.

Research output: Contribution to conference(Old data) Lecture or Presentation

2018

Influence of the E-coating process on the mechanical properties of aluminum welds

Silvayeh, Z., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticle

2014

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014, ASMET Forum für Metallurgie und Werkstofftechnik 2014. Leoben: ., p. 108-114

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticle

Open Access
File
2015

Foreword

Sommitsch, C. & Hribernik, B., 1 Jan 2015, 8th European Stainless Steel and Duplex Stainless Steel Conference 2015. 1 p.

Research output: Chapter in Book/Report/Conference proceedingForeword/postscript

2012

In-situ-Aufschmelz-Methode zur Bestimmung der Hochtemperatureigenschaften von Stählen

Djuric, D., Höller, C., Oberroither, M., Sonderegger, B. & Sommitsch, C., 2012, In : MP Materials Testing. 54, 2, p. 75-79

Research output: Contribution to journalArticle

2019

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePoster

Open Access
File
2019

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticle

Open Access
File
2016

Microstructure and creep behaviour of similar martensitic 9% chromium steel electron beam welds

Sommitsch, C., Beal, C., Schlacher, C., Pelzmann, T. & Sabitzer, C., 2016.

Research output: Contribution to conference(Old data) Lecture or Presentation

2012

Analysis of low-stress creep testing data and its implication on the life-time prediction for 9-12% Cr steels

Mayr, P., Schlacher, C., Mendez Martin, F., Radis, R. & Sommitsch, C., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., Vol. 12. p. C24-C25 (Creep and Fracture of Engineering Materials and Structures).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

ULTRA-FINE WIRE FABRICATING APPARATUS AND METHOD

Pourbashiri, M., Sedighi, M., Sommitsch, C., Pourbashiri, M., Sedighi, M. & Sommitsch, C., 7 Sep 2017, IPC No. B21C 1/ 04 A I, Patent No. US2017252788, Priority date 2 Mar 2016, Priority No. IR20161394301390

Research output: Patent

2013

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or Presentation

Investigation of pre-existing pores in creep loaded 9Cr steel

Yadav, S. D., Rosc, J., Sartory, B., Brunner, R., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Hoboken, NJ, USA: John Wiley & Sons, Inc, p. 85-90 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Stockinger, M. & Sommitsch, C., 2011, XXX. Verformungskundliches Kolloquium. ., p. 31-36

Research output: Chapter in Book/Report/Conference proceedingConference contribution