Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Annette Mütze
2011

Radio-frequency-based detection of electrical discharge machining bearing currents

Ahola, J., Särkimäki, V., Mütze, A. & Tamminen, J., 2011, In : IET electric power applications. 5, 4, p. 386-392

Research output: Contribution to journalArticle

2016

Discussion of machine placement and integration on the thermal design of HEV IPM machines

Paar, C. J. & Mütze, A., 31 Jul 2016, Transportation Electrification Conference and Expo (ITEC), 2016 IEEE.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Supporting unbalanced grids with induction machine drives by inverters without intermittent energy storage

Krischan, K., Seebacher, R. & Mütze, A., 2011, Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Determination of Original Non-Degraded and Fully Degraded B-H-Curves from Measurements of Material Submitted to Punching

Bali, M. S. J. & Mütze, A., 2014, Proceedings of the Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 2-3-2-3

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Epstein frame measurement based determination of original non-degraded and fully degraded magnetic properties of material submitted to mechanical cutting

Bali, M. S. J., De Gersem, H. & Mütze, A., 2015, IEEE International Electric Machines & Drives Conference. ., p. 1184-1189

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Influences of CO2 and FKL-laser cutting as well as mechanical cutting on the magnetic properties of electric steel sheets determined by Epstein frame and stator lamination stack measurements

Bali, M. & Muetze, A., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 1443-1450 8 p. 6953562

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Measurement of stator core magnetic characteristics

Clerc, A. J. & Mütze, A., 2011, Proc. of the 7th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1433-1438

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. & Mütze, A., 2016, Applied Power Electronics Conference and Exposition. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Electric machine utilization during the post-fault operation after inverter open circuit faults

Eickhoff, H., Strangas, E. G. & Mütze, A., 2017, Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Institute of Electrical and Electronics Engineers, p. 201-207 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Design Constraints of Small Single-Phase Permanent Magnet Brushless DC Drives for Fan Applications

Dunkl, S., Muetze, A. & Schoener, G., 1 Jul 2015, In : IEEE Transactions on Industry Applications. 51, 4, p. 3178-3186 9 p., 07047873.

Research output: Contribution to journalArticle

2013

Development and evaluation of control and power hardware for a line side PWM current source inverter

Krischan, K., Wiltberger, W. & Mütze, A., 2013, Proceedings of the EPE'13 ECCE Europe, 15th European Conference on Power Electronics and Applications. ., p. P.1-P.10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

An analysis into bridgeless inverted buck-boost PFC with ZVS capabilities

Leong, K. K. & Mütze, A., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. J. & Mütze, A., 20 Mar 2016.

Research output: Contribution to conferencePoster

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePoster

2017
2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2014, Proceedings of the IEEE Energy Conversion Congress and Exhibition ECCE 2014. ., p. 3266-3271

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016. 10 p.

Research output: Contribution to conferencePoster

Enhanced and fast detection of open circuit faults in inverters for electric drives

Eickhoff, H., Seebacher, R., Mütze, A. & Strangas, E., 2016, Proceedings of 2016 IEEE Transportation Electrification Conference and Expo (ITEC) . Institute of Electrical and Electronics Engineers, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters

Niskanen, V., Mütze, A. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 5, p. 3438 3447 p.

Research output: Contribution to journalArticle

2015

Thermal Real-Time Monitoring of a Gearbox Integrated Electric Rear Axle Drive for Hybrid Electric Traction

Paar, C. J. & Mütze, A., 2015, Proceedings of the IEEE Transportation Electrification Conference and Expo 2015. ., p. TS4-2-1-TS4-2-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012
2015

Fault behavior calculation of high efficient single phase induction machines using 2-D transient FEM

Bacher, J. P., Grabner, C. & Mütze, A., 2015, Proceedings 20th Conference on the Computation of Electromagnetic Fields (COMPUMAG). ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Efficiency Enhancement of a Three Phase Soft Switching Inverter Under Light Load Conditions

Mahafzah, K. A. A. K., Krischan, K. & Mütze, A., Oct 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. p. 3378-3383 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
2018

Smooth Reference Modulation to Improve Dynamic Response in Electric Drive Systems

Yazdanian, M., Mehrizi-Sani, A., Seebacher, R., Krischan, K. & Muetze, A., Jul 2018, In : IEEE Transactions on Power Electronics. 33, 7, p. 6434-6443 10 p.

Research output: Contribution to journalArticle

2015

Determination of the influences of different lamination steel cutting techniques on the steel’s BH-curves determined by means of a remagraph

Bali, M. S. J. & Mütze, A., 2015, IEEE International Electric Machines & Drives Conference. ., p. 1190-1196

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of electric discharge activity on bearing lubricating grease degradation

Romanenko, A., Mütze, A. & Ahola, J., 2015, IEEE Energy Conversion Congress and Exposition. ., p. 4851-4856

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Full-Size Converter Operation of Large Hydro Power Generators: Generator Design Aspects

Holzer, T. & Muetze, A., 6 Dec 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE). p. 7363-7368

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017
2018

Magnetostriction of Electrical Steel and Its Relation to the No-Load Noise of Power Transformers

Tanzer, T., Pregartner, H., Riedenbauer, M., Labinsky, R., Witlatschil, M., Muetze, A. & Krischan, K., 1 Sep 2018, In : IEEE Transactions on Industry Applications. 54, 5, p. 4306-4314 9 p., 8367848.

Research output: Contribution to journalArticle

2014

Inverter device nonlinearity characterization technique for use in a motor drive system

Babel, A., Mütze, A., Seebacher, R., Krischan, K. & Strangas, E., 2014, IEEE Applied Power Electronics Conference and Exposition. ., p. 2767-2774

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Comparison of Induction and Synchronous Reluctance Machine Based Actuators for Elevated Temperature Environments

Lang, K., Mütze, A., Bauer, R. & Stefan, P., 2016, In : IEEE Transactions on Energy Conversion. 31, 3, p. 1012-1022

Research output: Contribution to journalArticle

2018
2016

Minimization of the Synrel’s Oscillating Torque by Calculation of the Appropriate Skew Angle

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., 2016, Proceedings : XXIV Symposium Electromagnetic Phenomena in Nonlinear Circuits: June 28 - July 1, 2016, Helsinki, Finland : EPNC 2016. Helsinki: Aalto University, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe). p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePoster

2016

Thermal performance modeling of foil wound concentrated coils in electric machines

Rios, M. & Mütze, A., Sep 2016, p. 1-8.

Research output: Contribution to conferencePoster

2019

Angle Modulated Switching Strategy for Fractional Horsepower BLDC Motors for Improved Electromagnetic Compatibility

Krall, F., Grübler, H. & Muetze, A., 2 Sep 2019, 21st European Conference on Power Electronics and Applications (EPE'19 ECCE Europe). IEEE Xplore

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of Manufacturing Imperfections and Design Parameters on Radial Magnetic Forces in the BLDC Claw-Pole Motor

Leitner, S., Grübler, H. & Muetze, A., 13 May 2019, 2019 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE Xplore, p. 2167-2173

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Christian Doppler Laboratory for Brushless Drives for Pump and Fan Applications

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePoster

2018

Low-Cost Sub-Fractional Horsepower Brushless Direct Current Claw-Pole Machine Topology for Fan Applications

Leitner, S., Grübler, H. & Muetze, A., 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE Xplore, p. 1242 - 1248

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cogging Torque Minimization on a Mass-Produced Sub-Fractional Horsepower Brushless Direct Current Claw-Pole Motor

Leitner, S., Grübler, H. & Muetze, A., 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE Xplore, p. 6083 - 6089

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

Rheometer-Based Cogging Torque Measurement for Sub-Fractional HP Permanent Magnet Motors

Leitner, S., Krenn, G., Grübler, H. & Muetze, A., 19 Jun 2019, 2019 IEEE International Transportation and Electrification Conference and Expo (ITEC). IEEE Xplore, p. 1 -7

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hidden Noise Surfacing

Muetze, A., Hofmann, S. & Leitner, S., Oct 2019, Transportation Electrification eNewsletter, 2019, Oktober.

Research output: Contribution to specialist publicationFeatured article

2013

A power supply reaching titanium level efficiency for a wide range of input voltages

Konrad, W., Rainer, C., Deboy, G. & Mütze, A., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 3398-3405

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multi-domain modelling of a small single-phase brushless DC fan motor drive

Dunkl, S., Muetze, A. & Schoener, G., 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 1310-1315 6 p. 6556328

Research output: Chapter in Book/Report/Conference proceedingConference contribution