Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2016

Author

  • Johannes Khinast
2018

Mechanical strength of microspheres produced by drying of acoustically levitated suspension droplets

Kreimer, M., Aigner, I., Sacher, S., Krumme, M., Mannschott, T., van der Wel, P., Kaptein, A., Schröttner, H., Brenn, G. & Khinast, J., 2018, In : Powder Technology. 325, p. 247-260

Research output: Contribution to journalArticle

2018

RTD-based Material Tracking in a Fully-Continuous Dry Granulation Tableting Line

Martinetz, M., Kartunnen, A-P., Sacher, S., Wahl, P., Ketolainen, J., Khinast, J. & Korhonnen, O., 5 Jun 2018.

Research output: Contribution to conferencePaper

Open Access
2019

Heat transfer of dry granular materials in a bladed mixer: Effect of thermal properties and agitation rate

Hartmanshenn, C., Khinast, J. G., Papageorgiou, C. D., Mitchell, C., Quon, J. & Glasser, B. J., 27 Nov 2019, In : AIChE Journal.

Research output: Contribution to journalArticle

2016

The Effect of Powder and Process Parameters on the Powder Bed Uniformity of a low-dose Capsule Filling Process

Stranzinger, S., Faulhammer, E., Srčič, S., Dreu, R., Calzolari, V., Biserni, S., Paudel, A. & Khinast, J., 7 Jul 2016.

Research output: Contribution to conference(Old data) Lecture or Presentation

Optimization of a Micro-Feeding Unit in a Continuous Pharmaceutical Process Line

Hörmann, T., Tausendschön, J., Schmid, T., Koscher, G. & Khinast, J., 21 Apr 2016.

Research output: Contribution to conferencePoster

2019

Shedding light on coatings: Real-time monitoring of coating quality at industrial scale

Sacher, S., Wahl, P., Weissensteiner, M., Wolfgang, M., Pokhilchuk, Y., Looser, B., Thies, J., Raffa, A. & Khinast, J. G., 20 Jul 2019, In : International Journal of Pharmaceutics. 566, p. 57-66

Research output: Contribution to journalArticle

2016

NANEX: Process design and optimization

Baumgartner, R., Matic, J., Schrank, S., Laske, S., Khinast, J. & Roblegg, E., 14 Apr 2016, In : International Journal of Pharmaceutics. 506, p. 35-45 10 p.

Research output: Contribution to journalArticle

2018

Numerical investigation of a coarse-grain discrete element method in solid mixing in a spouted bed

Takabatake, K., Mori, Y., Khinast, J. G. & Sakai, M., 15 Aug 2018, In : Chemical Engineering Journal. 346, p. 416-426 11 p.

Research output: Contribution to journalArticle

2016

Real-Time Monitoring and Ejection of out-of-Spec Tablets Via NIR Chemical Imaging

Wolfgang, M., Wahl, P., Hauseder, G., Sacher, S., Kerschhaggl, M. & Khinast, J., 14 Nov 2016.

Research output: Contribution to conferencePoster

2019

Deriving control parameter settings from process models to control capsule fillers integrated into continuous manufacturing

Wagner, B., Cheong, S. F., Brinz, T. & Khinast, J., 2 Sep 2019, In : Drug Development and Industrial Pharmacy. 45, 9, p. 1523-1536

Research output: Contribution to journalArticle

2016

Effect of Bubble-Particle Interaction Models on Flow Predictions in Three-Phase Bubble Columns

Gruber, M. C., Radl, S. & Khinast, J., 26 Feb 2016, In : Chemical Engineering Science. 146, p. 226–243

Research output: Contribution to journalArticle

Open Access
2019

Drying of supported catalysts for high metal concentrations: A reduced parameter model

Noorithaya, A. V., Bishop, C., Sarkar, P., Khinast, J. G. & Glasser, B. J., 12 Oct 2019, In : Chemical Engineering Science. 206, p. 361-374 14 p.

Research output: Contribution to journalArticle

Particle-level residence time data in a twin-screw feeder

Toson, P. & Khinast, J. G., Dec 2019, In : Data in Brief . 27, 104672

Research output: Contribution to journalArticle

2018
2019

Prediction of the anisotropic mechanical properties of compacted powders

Loidolt, P., Ulz, M. H. & Khinast, J., 2019, In : Powder Technology. 345, p. 589-600 12 p.

Research output: Contribution to journalArticle

2018

The Effect of Liquid Bridge Model Details on the Dynamics of Wet Fluidized Beds

Wu, M., Khinast, J. & Radl, S., Feb 2018, In : AIChE Journal. 64, p. 437-456 10.1002/aic.15947.

Research output: Contribution to journalArticle

2016

Light in Powder - Penetration and Information

Scheibelhofer, O., Wahl, P., Larchevêque, B. & Khinast, J., 21 Mar 2016.

Research output: Contribution to conferencePoster

2019

Using online content uniformity measurements for rapid automated process development exemplified via an X-ray system

Wagner, B., Brinz, T. & Khinast, J., 3 Jul 2019, In : Pharmaceutical development and technology. 24, 6, p. 775-787

Research output: Contribution to journalArticle

2018

Control of three different continuous pharmaceutical manufacturing processes: Use of soft sensors

Rehrl, J., Kartunnen, A-P., Nicolaï, N., Hörmann, T., Horn, M., Korhonnen, O., Nopens, I., de Beer, T. & Khinast, J., 30 May 2018, In : International Journal of Pharmaceutics. 543, 1-2, p. 60-72

Research output: Contribution to journalArticle

2016

Multi-methodological investigation of the variability of the microstructure of HPMC hard capsules

Faulhammer, E., Khinast, J., Paudel, A., Wahl, V. & Markl, D., 25 Sep 2016, In : International Journal of Pharmaceutics. 511, 2, p. 840-854 14 p.

Research output: Contribution to journalArticle

2018

Understanding the motion of hard shell capsules in dry powder inhalers

Benque, B. & Khinast, J., 5 Nov 2018.

Research output: Contribution to conferencePoster

2016

Local gas holdup simulation and validation of industrial-scale aerated bioreactors

Witz, C., Treffer, D. F., Hardiman, T. & Khinast, J., 2 Oct 2016, In : Chemical Engineering Science. 152, p. 636-648 13 p.

Research output: Contribution to journalArticle

2019

Computational Fluid Dynamics-Discrete Element Method Modeling of an Industrial-Scale Wurster Coater

Boehling, P., Khinast, J. G., Jajcevic, D., Davies, C., Carmody, A., Doshi, P., Ende, M. T. A. & Sarkar, A., Jan 2019, In : Journal of Pharmaceutical Sciences . 108, 1, p. 538-550

Research output: Contribution to journalArticle

2020

LBM for two-phase (bio-)reactors

Eibl, P., Rustige, S., Witz, C. & Khinast, J., 30 May 2020, (Accepted/In press) Advances in Chemical Engineering. 67 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2018

Using Perusall to Enhance Student Learning of Particle Technology at Graz University of Technology

Lepek, D., Radl, S. & Khinast, J., 24 Apr 2018.

Research output: Contribution to conferencePoster

Capsule filling process‐induced tribo‐charging behaviour of HPMC and gelatin capsules with different external lubricants

Wutscher, T., Zellnitz, S., Kobler, M., Buttini, F., Andrade, L., Daza, V., Mercandelli, A., Biserni, S., Probst, S. E., Khinast, J. & Paudel, A., 1 Apr 2020, In : Journal of Aerosol Medicine and Pulmonary Drug Delivery . 33, 2, p. A7-A7 17.

Research output: Contribution to journalAbstract

2019

Model-based approach to the design of pharmaceutical roller-compaction processes

Toson, P., Lopes, D. G., Paus, R., Kumar, A., Geens, J., Stibale, S., Quodbach, J., Kleinebudde, P., Hsiao, W-K. & Khinast, J., Dec 2019, In : International Journal of Pharmaceutics: X. 1, 100005.

Research output: Contribution to journalArticle

Open Access

Tribo-Charging Behaviour of Inhalable Mannitol Blendswith Salbutamol Sulphate

Zellnitz, S., Pinto, J., Brunsteiner, M., Schröttner, H., Khinast, J. & Paudel, A., 2019, In : Pharmaceutical research. 36, 6, p. 80 11 p., 36:80.

Research output: Contribution to journalArticle

2018

Study of a low-dose capsule filling process by dynamic and static tests for advanced process understanding

Paudel, A., Stranzinger, S., Faulhammer, E., Scheibelhofer, O., Calzolari, V., Biserni, S. & Khinast, J., 5 Apr 2018, In : International Journal of Pharmaceutics. 540, 1-2, p. 22-30 8 p.

Research output: Contribution to journalArticle

2016
2019
Open Access
2016

NIR-Hyperspectral Imaging and Raman Chemical Mapping of Multilayer-Tablets

Poms, J., Scheibelhofer, O., Sacher, S. & Khinast, J., 30 Mar 2016.

Research output: Contribution to conferencePoster

2019

Performance Characterization of Static Mixers in Precipitating Environments

Kreimer, M., Zettl, M., Aigner, I., Mannschott, T., van der Wel, P., Khinast, J. G. & Krumme, M., Jul 2019, In : Organic Process Research & Devlopment. 23, 7, p. 1308-1320

Research output: Contribution to journalArticle

Predicting capsule fill weight from in-situ powder density measurements using terahertz reflection technology

Stranzinger, S., Faulhammer, E., Li, J., Dong, R., Zeitler, J. A., Biserni, S., Calzolari, V., Khinast, J. G. & Markl, D., 1 Dec 2019, In : International Journal of Pharmaceutics: X. 1, 100004.

Research output: Contribution to journalArticle

Open Access
2016

Speed change experiments in a rotary tablet press

Martinetz, M., Aigner, I., Rehrl, J., Sacher, S. & Khinast, J., 3 Oct 2016.

Research output: Contribution to conferencePoster

2019

Industrial scale simulations of tablet coating using gpu based dem: A validation study

Kureck, H. G., Govender, N., Siegmann, E., Böhling, P., Radeke, C. & Khinast, J., 20 Jul 2019, In : Chemical Engineering Science. p. 462-480 19 p.

Research output: Contribution to journalArticle

2016

Feasibility study for turret speed operating points in a rotary tablet press

Martinetz, M., Aigner, I., Rehrl, J., Scheibelhofer, O., Laske, S. & Khinast, J., Mar 2016.

Research output: Contribution to conference(Old data) Lecture or Presentation

Printing medicines as orodispersible dosage forms: Effect of substrate on the printed micro-structure

Planchette, C., Pichler, H., Wimmer-Teubenbacher, M., Gruber, M., Gruber-Wölfler, H., Mohr, S., Tetyczka, C., Hsiao, W. K., Paudel, A., Roblegg, E. & Khinast, J., 2016, In : International Journal of Pharmaceutics. p. 518-527

Research output: Contribution to journalArticle

Sensitivity analysis of a pharmaceutical tablet production process from the control engineering perspective

Rehrl, J., Gruber, A. F., Khinast, J. & Horn, M., 30 Nov 2016, In : International Journal of Pharmaceutics. 517, 1-2, p. 373-382 10 p.

Research output: Contribution to journalArticle

Application of Model-Predictive Control to a Feeding Blending Unit

Rehrl, J., Kruisz, J., Sacher, S., Horn, M. & Khinast, J., 14 Nov 2016.

Research output: Contribution to conferencePoster

Decoupling of a low-dose dosator capsule filling process in dynamic and static mode tests

Stranzinger, S., Faulhammer, E., Srčič, S., Calzolari, V., Biserni, S., Paudel, A. & Khinast, J., 31 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or Presentation

2018
2016

Particle-Based Modelling of Free-Surface Flow and Distributive Mixing in Modular Co-Rotating Twin-Screw Extruders

Matic, J., Eitzlmayr, A., Kondor, I., Koscher, G. & Khinast, J., 21 Apr 2016.

Research output: Contribution to conference(Old data) Lecture or Presentation

The Plug & Play Reactor: A Highly Flexible Device for Heterogeneous Reactions in Continuous Flow

Lichtenegger, G. J., Turšič, V., Kitzler, H., Obermaier, K., Khinast, J. & Gruber-Wölfler, H., 27 Jul 2016, In : Chemie - Ingenieur - Technik. 88, 10

Research output: Contribution to journalArticle