Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Author

  • Christof Sommitsch
2016

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012001.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition

Vollmer, R. & Sommitsch, C., 16 Oct 2017, AIP Conference Proceeedings 1896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2019

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

2017

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Thermomechanical Wear Testing of Metal Matrix Composite Cladding for Potential Application in Hot Rolling Mills

Domitner, J., Aigner, M., Stern, T., Paar, A., Sommitsch, C. & Elizondo, L., 2019, In : Steel research international. 10 p., 1900478.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2017

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

2018

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

2019

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2016

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

2017

Pitting corrosion behaviour of stainless steel AISI 304 with different tinting colours

Godavarthy Anantha Venkata, R. K. P., Gsellmann, B., Vallant, R. & Sommitsch, C., 25 May 2017, ESSC & DUPLEX 2017: 9th European Stainless Steel Conference - Science & Market / 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, p. 1-9 9 p. 026

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File
2016

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 15 Nov 2016, In : Wear. 366-367, p. 71-77 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2018

GUEST EDITORIAL

Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., 1 Oct 2018, In : Journal of Materials Engineering and Performance. 27, 10, p. 4981-4982 2 p.

Research output: Contribution to journalEditorialResearchpeer-review

2019

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2016

Retardation of fatigue crack growth in high strength steel S690 using a modified stop-hole technique

Razavi, S. M. J., Ayatollahi, M. R., Sommitsch, C. & Moser, C., 23 Nov 2016, In : Engineering fracture mechanics. 169, 0013-7944, p. 226 - 237

Research output: Contribution to journalArticleResearchpeer-review

Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment

Belyaev, A. K., Polyanskiy, A. M., Polyanskiy, V. A., Sommitsch, C. & Yakovlev, Y. A., 2016, In : International Journal of Hydrogen Energy. 41 , 20, p. 8627-8634

Research output: Contribution to journalArticleResearchpeer-review

2017

Preface

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T., 1 Jan 2017, In : Materials Science Forum. 879

Research output: Contribution to journalEditorialResearch

2016

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2019

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
2016

Evolution of the substructure of a novel 12% Cr steel under creep conditions

Yadav, S. D., Kalácska, S., Dománková, M., Yubero, D. C., Resel, R., Groma, I., Beal, C., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 1 May 2016, In : Materials characterization. 115, p. 23-31 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2017, In : International journal of materials research = Zeitschrift für Metallkunde. 108, 9, p. 741-749 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2019

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Microstructurally Based Modelling of Creep Deformation of Martensitic Steels

Sonderegger, B., Krenmayr, B., Riedlsperger, F. K., Fercher, B., Niederl, B. & Sommitsch, C., Oct 2019, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials 2019: Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials. ASM International, p. 360-369 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Microstructure and creep behaviour of similar martensitic 9% chromium steel electron beam welds

Sommitsch, C., Beal, C., Schlacher, C., Pelzmann, T. & Sabitzer, C., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Vergleichende Charakterisierung mechanischer Kennwerte von Walzenwerkstoffen

Armin, P., Schneider, R., Han, Trickl, T., Brandner, M., Elizondo, L., Beal, C. & Sommitsch, C., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2019

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Modeling surface rolling contact fatigue crack initiation taking severe plastic shear deformation into account

Trummer, G., Marte, C., Dietmaier, P., Sommitsch, C. & Six, K., 17 Feb 2016, In : Wear. 352-353, p. 136 - 145

Research output: Contribution to journalArticleResearchpeer-review

2020

Preface - to the issue on BHM

Sommitsch, C., Hackl, G. & Hribernik, B., 14 Jan 2020, In : Berg- und hüttenmännische Monatshefte. 2020, 1, p. 1 2 p.

Research output: Contribution to journalEditorialResearch

2019

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

Investigation of the fibre type influence on the energy desnity of the induction heating process through a semi-analytic method

Forstner, T., Sommitsch, C. & Fischer, F., 2019, Procedia Manufacturing 37 : Science Direct, Elsevier. p. 286-293 37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Influence and evaluation of the lubrication on the cold formability of a second-generation TWIP steel

Boskovic, V., Sommitsch, C. & Preininger, M., Jun 2017.

Research output: Contribution to conferencePaperResearch

2019

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2019, European Conference on Heat Treatment ECHT 2019.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mathematical Modelling of Weld Phenomena 11

Sommitsch, C., Enzinger, N. & Mayr, P., Dec 2016, 1. ed. Graz: Verlag der Technischen Universität Graz. 897 p.

Research output: Book/ReportBookResearchpeer-review

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2019

Mathematical Modelling of Weld Phenomena 12

Sommitsch, C., Enzinger, N. & Mayr, P., 2019, Graz: Verlag der Technischen Universität Graz. 1074 p.

Research output: Book/ReportBookResearchpeer-review

Open Access
2017

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

2019
2018

Modeling of contact zones in air bending of sheet metals

Domitner, J., Eckhard, R., Schweinzer, D., Leumüller, H., Heller, B. & Sommitsch, C., 2018, In : Journal of Physics / Conference Series. 1063, p. 012141-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Induktionsschweißen von carbonfaserverstärktem Polyamid 66 im automobilen Karosseriebau

Forstner, T., Sommitsch, C. & Fischer, F., 28 Jun 2018, In : Zeitschrift Kunststofftechnik. 14, 4, p. 233-278

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2016

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 19 Dec 2016, In : IOP Conference Series / Materials Science and Engineering. 159, 2001, p. 1-8 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2019

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2016

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation and optimization of the bonding behavior between substrate and coating processed by laser cladding

Vollmer, R. & Sommitsch, C., 2016, In : Physics procedia .

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2018

Numerical simulation and experimental validation of self-piercing riveting (SPR) of 6xxx aluminium alloys for automotive applications

Hönsch, F., Domitner, J., Sommitsch, C., Götzinger, B. & Kölz, M., 2018, In : Journal of Physics / Conference Series. 1063, p. 012081-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access