Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Annette Mütze
2011

A method for electrically isolated voltage measurement in PWM inverters

Vorauer, M., Krischan, K. & Mütze, A., 2011, International Conference on Electrical Drives and Power Electronics. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite-element supported transmission-line models for calculating high-frequency effects in machine windings

De Gersem, H. & Mütze, A., 2011, Conference on the Computation of Electromagnetic Fields. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of motor operating parameters on discharge bearing current activity

Mütze, A., Tamminen, J. & Ahola, J., 2011, In : IEEE Transactions on Industry Applications. 47, 4, p. 1767-1777

Research output: Contribution to journalArticle

Limitations of established vehicle modeling approaches for the conceptual design of hybrid electric special-purpose vehicles

Kolbe, H. & Mütze, A., 2011, IEEE Vehicle Power and Propulsion Conference. ., p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Limitations of established vehicle modelling approaches for the conceptual design of hybrid special-purpose vehicles

Kolbe, H. & Muetze, A., 2011, 2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011. 6043079

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Measurement of stator core magnetic characteristics

Clerc, A. J. & Mütze, A., 2011, Proc. of the 7th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1433-1438

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On the role of the shaft end in the radio-frequency emission of discharge bearing currents in induction motors

Ahola, J., Niskanen, V. & Mütze, A., 2011, Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance Comparison of Voltage-Source Inverters for Use with Distributed Energy Systems

Jaritz, M., Krischan, K. & Mütze, A., 2011, International Conference on Electrical Drives and Power Electronics. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radio-frequency-based detection of electrical discharge machining bearing currents

Ahola, J., Särkimäki, V., Mütze, A. & Tamminen, J., 2011, In : IET electric power applications. 5, 4, p. 386-392

Research output: Contribution to journalArticle

Simplified design of common-mode chokes for reduction of motor ground currents in inverter drives

Mütze, A. & Sullivan, C. R., 2011, In : IEEE Transactions on Industry Applications. 47, 6, p. 2570-2577

Research output: Contribution to journalArticle

Supporting unbalanced grids with induction machine drives by inverters without intermittent energy storage

Krischan, K., Seebacher, R. & Mütze, A., 2011, Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Consideration of steel degradation due to punching in finite element modeling of electric machines

Bali, M. S. J., De Gersem, H. & Mütze, A., 2012, Proceedings XXIIth Symposium EPNC Electromagnetic Phenomenon in Nonlinear Circuits. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Measurement of stator core magnetic degradation during the manufacturing process

Clerc, A. J. & Mütze, A., 2012, In : IEEE Transactions on Industry Applications. 48, 4, p. 1344-1352

Research output: Contribution to journalArticle

Studies of the contribution of alternating electromagnetic fields toward material fatigue in 100Cr6

Holweger, W., Wolf, M., Walther, F., Trojahn, W., Mütze, A., Kunzmann, J., Schreiber, J., Mayer, J. & Reichelt, M., 2012, In : Industrial lubrication and tribology. 64, 5, p. 247-252

Research output: Contribution to journalArticle

2013

A power supply reaching titanium level efficiency for a wide range of input voltages

Konrad, W., Rainer, C., Deboy, G. & Mütze, A., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 3398-3405

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Component selection tool to maximize overall energy conversion efficiency in a pumping system

Tamminen, J., Kosonen, A., Ahonen, T., Ahola, J., Immonen, P., Muetze, A. & Tolvanen, J., 2013, 2013 15th European Conference on Power Electronics and Applications, EPE 2013. ., 6631839

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development and evaluation of control and power hardware for a line side PWM current source inverter

Krischan, K., Wiltberger, W. & Mütze, A., 2013, Proceedings of the EPE'13 ECCE Europe, 15th European Conference on Power Electronics and Applications. ., p. P.1-P.10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multi-domain modeling of a small single-phase brushless DC fan motor drive

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proc. of the 8th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1310-1315

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multi-domain modelling of a small single-phase brushless DC fan motor drive

Dunkl, S., Muetze, A. & Schoener, G., 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 1310-1315 6 p. 6556328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2013, Proc. of the 8th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1289-1294

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On the role of the shaft end and the influence of frame size and load coupling on the RF emission characteristics of induction motors

Niskanen, V., Mütze, A. & Ahola, J., 2013, In : EPE journal. 23, 4, p. 42-50

Research output: Contribution to journalArticle

Self-excitation and stability at speed transients of self-excited single-phase reluctance generators

Abu-Elhaija, W. S. & Mütze, A., 2013, In : IEEE transactions on sustainable energy. 4, 1, p. 136-144

Research output: Contribution to journalArticle

Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters

Niskanen, V., Mütze, A. & Ahola, J., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4460-4467

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

An analysis into bridgeless inverted buck-boost PFC with ZVS capabilities

Leong, K. K. & Mütze, A., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A simple SiC JFET based AC variable current limiter

Konrad, W., Leong, K. K., Krischan, K. & Mütze, A., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computation of Induced Voltages and Currents in the Field Winding of Wound-Field Synchronous Machines under Transient Conditions

Bacher, J. P., Maier, M. & Mütze, A., 2014, Proceedings of the 2014 International Conference on Electrical Machines (ICEM). ., p. 86-92

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition monitoring and failure prognosis of IGBT inverters based on on-line characterization

Babel, A., Muetze, A., Seebacher, R., Krischan, K. & Strangas, E. G., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 3059-3066 8 p. 6953816

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of Original Non-Degraded and Fully Degraded B-H-Curves from Measurements of Material Submitted to Punching

Bali, M. S. J. & Mütze, A., 2014, Proceedings of the Sixteenth Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 2-3-2-3

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite-element modelling of magnetic material degradation due to punching

Bali, M. S. J., De Gersem, H. & Mütze, A., 2014, In : IEEE Transactions on Magnetics. 50, 2, p. 7018404-4 Seiten

Research output: Contribution to journalArticle

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2014, Proceedings of the IEEE Energy Conversion Congress and Exhibition ECCE 2014. ., p. 3266-3271

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Kolbe, H. & Mütze, A., 2014.

Research output: Contribution to conferencePoster

Influences of CO2 and FKL-laser cutting as well as mechanical cutting on the magnetic properties of electric steel sheets determined by Epstein frame and stator lamination stack measurements

Bali, M. & Muetze, A., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 1443-1450 8 p. 6953562

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Inverter device nonlinearity characterization technique for use in a motor drive system

Babel, A., Mütze, A., Seebacher, R., Krischan, K. & Strangas, E., 2014, IEEE Applied Power Electronics Conference and Exposition. ., p. 2767-2774

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On inverter induced bearing currents, bearing maintenance scheduling, and prognosis

Mütze, A. & Strangas, E., 17 Nov 2014, Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014. Institute of Electrical and Electronics Engineers, p. 1915-1921 7 p. 6960445

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 4, p. 2592-2601

Research output: Contribution to journalArticle

Study of incipient bearing damage monitoring in variable speed drive systems

Romanenko, A., Ahola, J., Mütze, A. & Niskanen, V., 2014, Proc. 16th European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on bearing impedance properties at several hundred kilohertz for different electric machine operating parameters

Niskanen, V., Mütze, A. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 5, p. 3438 3447 p.

Research output: Contribution to journalArticle

2015

3D-FEM calculation of electromagnetic properties of single-phase induction machines

Bacher, J. P., Waldhart, F. & Mütze, A., 2015, In : IEEE Transactions on Energy Conversion. 30, 1, p. 142-149

Research output: Contribution to journalArticle

3-D FEM calculation of electromagnetic properties of single-phase induction machines

Bacher, J., Muetze, A. & Waldhart, F., 2015, In : IEEE Transactions on Energy Conversion. 30, 1, p. 142-149 8 p., 6894206.

Research output: Contribution to journalArticle

A single stage 54V to 1.8V multi-phase cascaded buck voltage regulator module

Leong, K. K., Deboy, G., Krischan, K. & Muetze, A., 8 May 2015, APEC 2015 - 30th Annual IEEE Applied Power Electronics Conference and Exposition. May ed. Institute of Electrical and Electronics Engineers, Vol. 2015-May. p. 1966-1973 8 p. 7104617

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of induction and synchronous reluctance machine based actuators for elevated temperature environments

Lang, K., Mütze, A., Bauer, R. & Pircher, S., 2015, Proceedings 17th European Conference on Power Electronics and Applications (EPE). ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2015, In : IEEE Transactions on Industry Applications. 51, 4, p. 3178-3186

Research output: Contribution to journalArticle

Design Constraints of Small Single-Phase Permanent Magnet Brushless DC Drives for Fan Applications

Dunkl, S., Muetze, A. & Schoener, G., 1 Jul 2015, In : IEEE Transactions on Industry Applications. 51, 4, p. 3178-3186 9 p., 07047873.

Research output: Contribution to journalArticle