Find Research Outputs

Search results

• 2023

  Mechanical performance and failure behavior of screw-bonded joints of aluminum sheets and cross-laminated birch veneer plates

  Domitner, J., Silvayeh, Z., Predan, J., Graf, E., Krenke, T. & Gubeljak, N., Apr 2023, In: Engineering Failure Analysis. 146, 8 p., 107074.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Medha: Microcoded Hardware Accelerator for computing on Encrypted Data

  Mert, A. C., Aikata, A., Kwon, S., Shiin, Y., Yoo, D., Lee, Y. & Sinha Roy, S., 2023, (Accepted/In press) In: IACR Transactions on Cryptographic Hardware and Embedded Systems. 2023, 1, 38 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

• Medical Devices and In Vitro Diagnostics: Requirements in Europe

  Baumgartner, C. (ed.), Harer, J. (ed.) & Schröttner, J. (ed.), 2023, (In preparation) 1 ed. Cham: Springer Nature Switzerland AG. (Reference Series in Biomedical Engineering)

  Research output: Book/Report › Anthology › peer-review

• Message Passing-Based 9-D Cooperative Localization and Navigation with Embedded Particle Flow

  Wielandner, L., Leitinger, E., Meyer, F. & Witrisal, K., 3 Jan 2023.

  Research output: Working paper › Preprint

  File

• Meta-Modelling of a Li-Ion Battery for Real-Time Prediction based on Proper Generalized Decomposition

  Schmid, A., Ellersdorfer, C., Raffler, M., Feist, F., Pasquale, A., Champaney, V., Guévelou, S., Ziane, M. & Chinesta, F., 2 Feb 2023.

  Research output: Contribution to conference › Poster

• Metasurfaces for Filter Miniaturization and Out-of-Band Rejection Improvement

  Arsanjani, A., Bartlett, C., Robins, L., Teschl, R., Bösch, W. & Höft, M., 2 Jan 2023, (Accepted/In press) In: IEEE Microwave and Wireless Technology Letters. PP, 99, p. 1-4 4 p., 10004850.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Micro-Computed Tomography (µCT) as a Tool for High-Resolution 3D Imaging and Analysis of Intraocular Lenses: Feasibility and Proof of the Methodology to Evaluate YAG Pits

  Borkenstein, A., Borkenstein, E-M., Machado Charry, F. E., Fitzek, H. M., Rattenberger, J., Schennach, R. & Kothleitner, G., Feb 2023, In: Ophthalmology and Therapy. 12, 1, p. 447-457 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Microstructure characterisation of multi-principal element alloys welds produced by electron beam welding

  Buzolin, R. H., Richter, T., Pixner, F., Rhode, M., Schroepfer, D. & Enzinger, N., Jan 2023, In: Materials & Design. 225, 111609.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Mikroperforierte Schallabsorber für die Anwendung in strömungsakustischen Problemstellungen

  Czwielong, F., Floss, S., Maurerlehner, P., Toth, F., Kaltenbacher, M., Becker, S. & Schoder, S., 2023, In: Akustik Journal. 2023, 1, p. 22-33

  Research output: Contribution to journal › Article › peer-review

• Minimal Solvers for Relative Pose Estimation of Multi-Camera Systems using Affine Correspondences

  Guan, B., Zhao, J., Barath, D. & Fraundorfer, F., 2023, In: International Journal of Computer Vision. 131, 1, p. 324-345 22 p.

  Research output: Contribution to journal › Article › peer-review

• Mixed-Reality in der Ingenieurgeologie – von der Datenaufnahme bis zum immersiven 3D-Hologramm

  Kaspar, M. & Kieffer, D. S., 2023, (Accepted/In press) In: Bauingenieur. 2023, 4

  Research output: Contribution to journal › Article › peer-review

• Modeling of an Urban Ropeway integrated in a crowded Transit System

  Hofer, K., Haberl, M. & Fellendorf, M., 8 Jan 2023.

  Research output: Contribution to conference › Poster › peer-review

• Modernisierung der Antriebskonzepte für Nebenfahrzeuge

  Landgraf, M., Knabl, D. C., Barrena Cárdenas, V. & Kratochvil, G., 2023, 350 p.

  Research output: Book/Report › Commissioned report

• MonteBoxFinder: Detecting and Filtering Primitives to Fit a Noisy Point Cloud

  Ramamonjisoa, M., Stekovic, S. & Lepetit, V., Oct 2023, MonteBoxFinder: Detecting and Filtering Primitives to Fit a Noisy Point Cloud.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Morphological parameters affecting false lumen thrombosis following type B aortic dissection: a systematic study based on simulations of idealized models

  Jafarinia, A., Melito, G. M., Müller, T. S., Rolf-Pissarczyk, M., Holzapfel, G., Brenn, G., Ellermann, K. & Hochrainer, T., 11 Jan 2023, In: Biomechanics and Modeling in Mechanobiology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Non-Data-Aided SNR Estimation for Bandlimited Optical Intensity Channels

  Gappmair, W., Jan 2023, In: Sensors . 23, 13 p., 802.

  Research output: Contribution to journal › Article › peer-review

• Novel green technology for wastewater treatment: Geo-material/geopolymer applications for heavy metal removal from aquatic media

  Grba, N., Baldermann, A. & Dietzel, M., Feb 2023, In: International journal of sediment research. 38, 1, p. 33-48 16 p.

  Research output: Contribution to journal › Article › peer-review

• Numerical modelling and experimental testing of a thermal storage system with non-spherical macro-encapsulated phase change material modules

  Heinz, A. & Moser, C., Feb 2023, In: Journal of Energy Storage. 58, 58, 106427.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Numerical procedure for prechamber transfer from a single-cylinder engine to a rapid compression machine

  Soni, R., Posch, S., Gößnitzer, C., Pirker, G. & Wimmer, A., 2023, (Accepted/In press) In: International Journal of Engine Research.

  Research output: Contribution to journal › Article › peer-review

• Numerical results for an unconditionally stable space-time finite element method for the wave equation

  Löscher, R. F., Steinbach, O. & Zank, M., 4 Mar 2023, (Accepted/In press) Domain Decomposition Methods in Science and Engineering XXVI.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Numerical Studies on Soil Structure Interaction of Integral Railway Bridges with Different Backfills

  Stastny, A. & Tschuchnigg, F., 2023, Challenges and Innovations in Geomechanics - Proceedings of the 16th International Conference of IACMAG - Volume 3. Barla, M., Insana, A., Di Donna, A. & Sterpi, D. (eds.). Cham: Springer, Vol. 3. p. 338-345 8 p. (Lecture Notes in Civil Engineering; vol. 288 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Observation of Dirac Charge Density Waves in Bi2Te2Se

  Ruckhofer, A., Benedek, G., Bremholm, M., Ernst, W. E. & Tamtögl, A., 24 Jan 2023, In: Nanomaterials. 13, 3, 476.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• On the fully additive manufacturing of PC/AlSi10Mg hybrid structures

  Oliveira, G. H. M., Belei Feliciano, C. A., Sales de Carvalho, W., Canto, L. B. & Amancio-Filho, S. T., Jan 2023, In: Materials Letters. 330, 133378.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• On the number variance of zeta zeros and a conjecture of Berry

  Lugar, M. M., Milinovich, M. B. & Quesada-Herrera, E., 25 Jan 2023, In: Mathematika. 69, 2, p. 303-348 46 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

• On the significance of accelerator enriched layers in wet-mix shotcrete

  Sakoparnig, M., Galan, I., Kusterle, W., Lindlar, B., Koraimann, G., Angerer, T., Steindl, F. R., Briendl, L., Jehle, S., Flotzinger, J., Juhart, J. & Mittermayr, F., Jan 2023, In: Tunnelling and Underground Space Technology. 131, 104764.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• On the Use of Embedded Beam Formulations for the Numerical Analysis of Deep Foundations

  Granitzer, A-N. & Tschuchnigg, F., 2023, Challenges and Innovations in Geomechanics: Proceedings of the 16th International Conference of IACMAG . Barla, M., Insana, A., Di Donna, A. & Sterpi, D. (eds.). Cham: Springer Nature Switzerland AG, Vol. 3. p. 307-314 8 p. ( Lecture Notes in Civil Engineering ; vol. 288).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Optimal robust exact differentiation via linear adaptive techniques

  Seeber, R. & Haimovich, H., Feb 2023, In: Automatica. 148, 13 p., 110725.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimized selection of component models for photovoltaic and energy storage system simulations

  Schweighofer, B., Buchroithner, A., Felsberger, R. & Wegleiter, H., 1 Jan 2023, In: Solar Energy. 249, p. 559-568 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimizing the geothermal potential of tunnel water by separating colder sectional discharges - Case study Brenner Base Tunnel

  Geisler, T., Wolf, M., Götzl, G., Burger, U., Cordes, T., Voit, K., Straka, W., Nyeki, E., Haslinger, E., Auer, R., Lauermann, M., Pol, O., Obradovic, M., Pröll, T. & Marcher, T., Feb 2023, In: Renewable Energy. 203, p. 529-541 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Organic Acid to Nitrile: a chemoenzymatic three-step route

  Winkler, M., Horvat, M., Schiefer, A., Weilch, V., Rudroff, F., Patek, M. & Martínková, L., 10 Jan 2023, In: Advanced Synthesis and Catalysis. 365, 1, p. 37-42 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Paulownia (Paulownia elongataS.Y.Hu)–importance for forestry and a generalscreening of technological and material properties

  Huber, C., Moog, D., Pramreiter, M., Stadlmann, A., Baumann, G., Praxmarer, G., Gutmann, R., Eisler, H. & Müller, U., 4 Feb 2023, In: Wood Material Science and Engineering. 13 p.

  Research output: Contribution to journal › Article › peer-review

• PEO/Polymer hybrid coatings on magnesium alloy to improve biodegradation and biocompatibility properties

  Ghanbari, A., Bordbar-Khiabani, A., Warchomicka, F., Sommitsch, C., Yarmand, B. & Zamanian, A., Feb 2023, In: Surfaces and Interfaces. 36, 102495.

  Research output: Contribution to journal › Article › peer-review

• Personalized dermal patches – Inkjet printing of prednisolone nanosuspensions for individualized treatment of skin diseases

  Fligge, M., Letofsky-Papst, I., Bäumers, M., Zimmer, A. & Breitkreutz, J., 2023, In: International Journal of Pharmaceutics. 630, 10 p., 122382.

  Research output: Contribution to journal › Article

• Phyllosphere-associated microbiota in built environment: Do they have the potential to antagonize human pathogens?

  Wicaksono, W. A., Reisenhofer-Graber, T., Erschen, S., Kusstatscher, P., Berg, C., Krause, R., Cernava, T. & Berg, G., Jan 2023, In: Journal of Advanced Research. 43, p. 109-121 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Planar Panels and Planar Supporting Beams in Architectural Structures

  Jiang, C., Wang, C., Tellier, X., Wallner, J. & Pottmann, H., Apr 2023, In: ACM Transactions on Graphics. 42, p. 1-17 19.

  Research output: Contribution to journal › Article › peer-review

• Poissonian correlations of higher orders

  Hauke, M. & Zafeiropoulos, A., Feb 2023, In: Journal of Number Theory. 243, p. 202-240 39 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Posse und Volksstück: Ansätze, Wegemarken und Problemfelder einer ungeschriebenen Gattungspoetik

  Milkovits, D., 2023, (In preparation)

  Research output: Thesis › Master's Thesis

• Powder bed dynamics of a single-tablet-scale vibratory mixing process

  Kottlan, A., Glasser, B. J. & Khinast, J. G., 15 Jan 2023, In: Powder Technology. 414, 118029.

  Research output: Contribution to journal › Article › peer-review

• Power Transformers under DC/GIC Bias

  Albert, D., 11 Jan 2023, Verlag der Technischen Universität Graz. 315 p.

  Research output: Book/Report › Book › peer-review

• Practical Timing Side-Channel Attacks on Memory Compression

  Schwarzl, M., Borrello, P., Saileshwar, G., Müller, H., Schwarz, M. & Gruss, D., 2023, (Submitted) 43th IEEE Symposium on Security and Privacay: IEEE S&P 2023.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  File

• Prediction in functional regression with discretely observed and noisy covariates

  Hörmann, S. & Jammoul, F., Feb 2023, In: Computational Statistics & Data Analysis. 178, 107600.

  Research output: Contribution to journal › Article

  Open Access

  File

• Prediction of Geological Conditions Ahead of the Tunnel Face: Comparing the Accuracy of Machine Learning Models Trained on Real and Synthetic Data

  Sapronova, A., Unterlaß, P. J., Dickmann, T., Hecht-Méndez, J. & Marcher, T., 2023, Trends on Construction in the Digital Era - Proceedings of ISIC 2022. Gomes Correia, A., Azenha, M., Cruz, P. J. S., Novais, P. & Pereira, P. (eds.). Springer, Cham, p. 76-86 11 p. 6. (Lecture Notes in Civil Engineering; vol. 306 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• Predictions of the P1 approximation for radiative heat transfer in heterogeneous granular media

  Mačak, J., Goniva, C. & Radl, S., 1 Feb 2023, In: Particuology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Production and characterization of bio-oil from fluidized bed pyrolysis of olive stones, pinewood, and torrefied feedstock

  Trubetskaya, A., von Berg, L., Johnson, R., Moore, S., Leahy, J. J., Han, Y., Lange, H. & Anca-Couce, A., Jan 2023, In: Journal of analytical and applied pyrolysis. 2023, 169, 105841.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Propagation of Linear Uncertainties through Multiline Thru-Reflect-Line Calibration

  Hatab, Z., Gadringer, M. E. & Bösch, W., 22 Jan 2023.

  Research output: Working paper › Preprint

  File

• Recent advancements in high performance Polymer Electrolyte Fuel Cell electrode fabrication – novel materials and manufacturing processes

  Grandi, M., Rohde, S., Liu, D-J., Gollas, B. & Hacker, V., 20 Jan 2023, (Accepted/In press) In: Journal of Power Sources.

  Research output: Contribution to journal › Review article › peer-review

• REPAIR: REnormalizing Permuted Activations for Interpolation Repair

  Jordan, K., Sedghi, H., Saukh, O., Entezari, R. & Neyshabur, B., 20 Jan 2023, International Conference On Representation Learning.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

• Restoring Vision in Adverse Weather Conditions With Patch-Based Denoising Diffusion Models

  Özdenizci, O. & Legenstein, R., 2023, In: IEEE Transactions on Pattern Analysis and Machine Intelligence. p. 1-12

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Review on field-induced phase transitions in lead-free NaNbO₃-based antiferroelectric perovskite oxides for energy storage

  Zhang, M. H., Fulanović, L., Zhao, C. & Koruza, J., Jan 2023, In: Journal of Materiomics. 9, 1, p. 1-18 18 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• Safety Assessment of High Dynamic Pre-Loaded Lithium Ion Pouch Cells

  Ellersdorfer, C., Höschele, P., Heider, E., Kovachev, G. & Gstrein, G., 19 Jan 2023, In: Batteries.

  Research output: Contribution to journal › Article › peer-review