Find Research Outputs

Search results

• 2019

  (Sprayed) concrete production in life cycle assessments: a systematic literature review

  Ruschi, M., Passer, A. & Mittermayr, F., 13 Aug 2019, In : The International Journal of Life Cycle Assessment. 20 p.

  Research output: Contribution to journal › Article

  Open Access

• (Ufer-)Lose Gedanken zum Thema Brücke

  Verhovsek, S., 11 Feb 2019

  Research output: Non-print form › Website / Web publication

• 100 Jahre Frauenstudium: Streiflichter auf Pionierinnen der Architektur an der Technischen Universität Graz

  Reismann, B., Aug 2019, In : Steirische Berichte. 2019, 3, p. 12-13 2 p.

  Research output: Contribution to journal › Article

• 12 Jahre urbaner Holzbau

  Kaden, W. T., Dec 2019, Waldgesellschaft Dresden 2019: Bericht zur 69. Tagung des Deutschen Forstvereins e.V.. Göttingen: ID Wald GmbH, p. 20

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 15th International Workshop on Variable Structure Systems and Sliding Mode Control (VSS18) [Conference Reports]

  Steinberger, M., Horn, M. & Fridman, L., 1 Feb 2019, In : IEEE Control Systems Magazine. 39, 1, p. 79-80 2 p., 8616917.

  Research output: Contribution to journal › Article

• 17. EMV-Fachtagung

  Winkler, G. (ed.), 2019, Wien: Österreichischer Verband für Elektrotechnik. (OVE-Schriftenreihe; vol. 98)

  Research output: Book/Report › Anthology

• 17. Grazer Baubetriebs- und Bauwirtschaftssymposium: Reduktion von Bauablaufstörungen und systematischer Umgang mit Mehrkostenforderungen - baubetriebliche, bauwirtschaftliche und rechtliche Aspekte

  Hofstadler, C. (ed.), Heck, D. (ed.) & Kummer, M. (ed.), Apr 2019, Graz: Verlag der Technischen Universität Graz. 302 p.

  Research output: Book/Report › Anthology

• 1D simulation-based development of a safety concept for the investigation of a high-pressure gas-diesel injector on a single-cylinder research engine

  Dimitrov, D., Aßmus, K., Redtenbacher, C. & Schubert-Zallinger, C., 17 Jun 2019, Proceedings trans & MOTAUTO 2019. 4 p. (trans & MOTAUTO).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 1-d simulation Model of a progressive Flow control for hydrostatic bearings

  Edler, J. & Lovrec, D., 2019, In : International Journal of Simulation Modelling. 18, 2, p. 267-278 12 p.

  Research output: Contribution to journal › Article

  Open Access

  • Hydrostatic bearings
  • Hydrostatics
  • Bearings (structural)
  • Flow Control
  • Flow control

• 33 Interviews zur Architektur

  Riewe, R., 2019, 33 Interviews zur Architektur.

  Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution

• 3D Bloch-Siegert EPI B₁₊-mapping

  Lesch, A. J., Aigner, C. S., Spann, S. M., Schlögl, M. & Stollberger, R., 2019, p. 0926.

  Research output: Contribution to conference › Abstract

• 3D-Druck von Natriumacetat-Trihydrat: Auszüge aus der Dissertation

  Brillinger, M., 2019, Saarbrücken: Südwestdeutscher Verlag für Hochschulschriften. 87 p.

  Research output: Book/Report › Book

• 3D-Druck von Natriumacetat-Trihydrat: produktiv, einfach, ressourcenschonend

  Brillinger, M., Fuchs, C., Haas, F. & Pichlkastner, C., 12 Sep 2019.

  Research output: Contribution to conference › Poster

• 3D Fluid Flow Estimation with Integrated Particle Reconstruction

  Lasinger, K., Vogel, C., Pock, T. & Schindler, K., 1 Jan 2019, Pattern Recognition - 40th German Conference, GCPR 2018, Proceedings. Fritz, M., Bruhn, A. & Brox, T. (eds.). Springer-Verlag Italia, p. 315-332 18 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11269 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fluid Flow
  • Flow of fluids
  • Motion estimation
  • Fluids
  • Motion

• 3D Model-Based Parameter Quantification on Resource Constrained Hardware using Double-Buffering

  Maier, O. & Stollberger, R., 2019.

  Research output: Contribution to conference › Abstract

  • Hardware
  • Data storage equipment
  • Graphics processing unit

• 3D Nanoprinting Using Electron and Ion Beams

  Fowlkes, J. D., Mutunga, E., Winkler, R., Sattelkow, J., Pakeltis, G., Rack, P., Belianinov, A., Ovchinnikova, O. S. & Plank, H., 2019, MRS Fall Meeting 2019. p. 2020

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D nanoprinting via focused electron beams

  Winkler, R., Fowlkes, J. D., Rack, P. & Plank, H., 8 May 2019, In : Journal of Applied Physics. 125, p. 210901 13 p.

  Research output: Contribution to journal › Article

• 3D Nano-Thermistor for AFM Based Thermal Nanoprobing

  Sattelkow, J., Fröch, J., Winkler, R., Schwalb, C., Hummel, S. & Plank, H., Apr 2019, Workshop Handbook: Program & Abstract. p. 58

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Pose Estimation from Color Images without Manual Annotations

  Rad, M., Oberweger, M. & Lepetit, V., 2019, Proceedings of the joint OAGM & ARW Workshop 2019 . Pichler, A., Roth, P. M., Slabatnig, R. & Stübl, G. (eds.). Graz: Verlag der Technischen Universität Graz, 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Color
  • Robotics

• 3D-Printing of High-κ Thiol-Ene Resins with Spiro-Orthoesters as Anti-Shrinkage Additive

  Marx, P., Romano, A., Roppolo, I., Chemelli, A., Mühlbacher, I., Kern, W., Chaudhary, S., Andritsch, T., Sangermano, M. & Wiesbrock, F., 1 Dec 2019, In : Macromolecular Materials and Engineering. 304, 12, 10 p., 1900515.

  Research output: Contribution to journal › Article

  • Ethylene Glycol
  • Ethylene glycol
  • Sulfhydryl Compounds
  • Printing
  • Ethers

• 3-Hydroxytyrosol: A whole cell mediated Bioreduction using a type IV Carboxylate Reductase

  Horvat, M. & Winkler, M., 9 Jul 2019.

  Research output: Contribution to conference › Poster

• 4-D Printing of NiTi Shape Memory Alloys

  Paiotti Marcondes Guimaraes, R., Pixner, F., Trimmel, G. & Amancio-Filho, S. T., 26 Sep 2019.

  Research output: Contribution to conference › Poster

  Open Access

  File

  • Shape memory effect
  • Printing
  • Titanium
  • Nickel
  • 3D printers

• 5. Internationale Tagung für Qualitätsmanagement und Qualitätsentwicklung im Hochschulbereich: Qualitäts- und Wissensmanagement an Hochschulen – zwei Perspektiven?

  Berner, M. (ed.), Vogl, S. (ed.) & Wagner, D. (ed.), 2019, 1 ed. Graz: Technische Universtität Graz. 181 p.

  Research output: Book/Report › Anthology

  Open Access

• 5 years' experience using distributed fiber optic sensing along ductile driven piles

  Monsberger, C., Winkler, M., Woschitz, H., Lienhart, W. & Hayden, M., 2019, 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure: Transferring Research into Practice. Vol. 2. p. 1065-1070

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A 300 μm Organotypic Bone Slice Culture Model for Temporal Investigation of Endochondral Osteogenesis

  Srinivasaiah, S., Musumeci, G., Mohan, T., Castrogiovanni, P., Absenger-Novak, M., Zefferer, U., Mostofi, S., Bonyadi Rad, E., Grün, N. G., Weinberg, A. M. & Schafer, U., 1 Apr 2019, In : Tissue Engineering / C. 25, 4, p. 197-212 16 p.

  Research output: Contribution to journal › Article

  • Osteogenesis
  • Bone
  • Bone Development
  • Bone and Bones
  • Diaphyses

• A Belief Propagation Algorithm for Multipath-Based SLAM

  Leitinger, E., Meyer, F., Hlawatsch, F., Witrisal, K., Tufvesson, F. & Win, M. Z., 1 Nov 2019, In : IEEE transactions on wireless communications. 18, 11, 18 p.

  Research output: Contribution to journal › Article

  • Simultaneous Localization and Mapping
  • Belief Propagation
  • Multipath
  • Anchors
  • Factor Graph

• A Benzobis(thiazole)-Based Copolymer for Highly Efficient Non-Fullerene Polymer Solar Cells

  Wen, S., Li, Y., Rath, T., Li, Y., Wu, Y., Bao, X., Han, L., Ehmann, H., Trimmel, G., Zhang, Y. & Yang, R., 12 Feb 2019, In : Chemistry of Materials. 31, 3, p. 919-926 8 p.

  Research output: Contribution to journal › Article

  • Thiazoles
  • Polymers
  • Copolymers
  • Solar radiation
  • Conversion efficiency

• Ab initio prediction of a two-dimensional variant of the iridate IrO2

  Smolyanyuk, A., Aichhorn, M., Mazin, I. I. & Boeri, L., 9 Dec 2019, In : Physical Review / B. 100, 235114.

  Research output: Contribution to journal › Article

  Open Access

  File

• About Different Load Configurations for Mixed-Mode Load-Pull Measurements

  Veit, D., Gadringer, M. E. & Leitgeb, E., 13 May 2019. 4 p.

  Research output: Contribution to conference › Paper

  • Tuning
  • Tuners

• A Case Study based Digitalization Training for Learning Factories

  Hulla, M. U., Hammer, M., Karre, H. D. & Ramsauer, C., Apr 2019, Research. Experience. Education. 9th Conference on Learning Factories 2019 . Niederlande: Elsevier B.V., Vol. 31. p. 169-174 5 p. (Procedia Manufacturing; vol. 31).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Accelerated occlusion computation

  Schmalstieg, D., Steinberger, M. & Voglreiter, P., 2019

  Research output: Patent

• Accelerating parameter estimation in Doyle-Fuller-Newman Model for lithium-ion batteries

  Reddy, S. R., Scharrer, M. K. & Watzenig, D., 2019, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2019

  Research output: Contribution to journal › Article

• Accesing the Internal Morphology of nano-Granular FEBID Materials in 3D Space by Electron Tomography

  Trummer, C., Winkler, R., Plank, H., Kothleitner, G. & Haberfehlner, G., Apr 2019, Workshop Handbook: Program & Abstract. p. 60

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Accessing the Internal Morphology of Nano-GranularFEBID Materials in 3D Space by Electron Tomography

  Trummer, C., Winkler, R., Plank, H., Kothleitner, G. & Haberfehlner, G., Apr 2019.

  Research output: Contribution to conference › Poster

  Open Access

  File

• A cell-free in vitro reduction of carboxylate to aldehyde

  Schwarz, A., Strohmeier, G., Eiteljörg, I., Kohrt, J., Howard, R. & Winkler, M., Nov 2019.

  Research output: Contribution to conference › Poster

• A cfd-method for the analysis and optimization of the fixed bed conversion in biomass grate furnaces

  Singer, M., Mehrabian, R., Gruber, T., Anca-Couce, A. & Scharler, R., 1 Jan 2019, European Biomass Conference and Exhibition Proceedings. Vol. 27. p. 688-693 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • furnaces
  • combustion
  • Biomass
  • Furnaces
  • Sensitivity analysis

• Achieving Robust and Reliable Wireless Communications in Hostile In-Car Environments

  Kraus, D., Diwold, K., Leitgeb, E. & Priller, P., Oct 2019, IoT 2019: Proceedings of the 9th International Conference on the Internet of Things 2019. Association of Computing Machinery, a30. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Railroad cars
  • Communication
  • Antennas
  • Bluetooth
  • Telecommunication links

• Acid Extraction from Liquid Phase Pyrolysis Oil Using Cyanex®923 and Subsequent Solvent Regeneration

  Painer, D., Treusch, K., Schwaiger, N., Weiß, T., Pucher, P. & Siebenhofer, M., 12 Sep 2019, In : Chemie - Ingenieur - Technik. 91, 11, p. 1582 1588 p.

  Research output: Contribution to journal › Article

• A Class-D Amplifier with Digital PWM and Digital Loop-Filter using a Mixed-Signal Feedback Loop

  Auer, M. & Karaca, T. D., Nov 2019, ESSCIRC 2019 - IEEE 45th European Solid State Circuits Conference (ESSCIRC). Institute of Electrical and Electronics Engineers, p. 153-156 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Pulse width modulation
  • Feedback
  • Digital to analog conversion
  • Topology
  • Harmonic distortion

• A Client/Server Based Online Environment for Manual Segmentation of Medical Images

  Wild, D., Weber, M. & Egger, J., 2019, The 23rd Central European Seminar on Computer Graphics (CESCG). p. 1-8

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Servers
  • Medical image processing
  • Web browsers
  • Medical imaging
  • Fault tolerance

• A Client/Server based Online Environment for the Calculation of Medical Segmentation Scores

  Weber, M., Wild, D., Wallner, J. & Egger, J., 2019, 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). p. 3463-3467 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Image segmentation
  • Servers
  • Medical imaging
  • Radiology
  • Tumors

• A co-expression system to shift the equilibrium of transamination reactions toward the synthesis of enantiomerically pure amines

  Telzerow, A., Hobisch, M., Müller, M., Schürmann, M., Schwab, H. & Steiner, K., 1 Jul 2019, In : Molecular Catalysis. 471, p. 38-43 6 p.

  Research output: Contribution to journal › Article

  • dehydrogenases
  • Amines
  • amines
  • Transaminases
  • Glucose 1-Dehydrogenase

• A combined method to model grain crushing with DEM

  Lin, J., Bauer, E. & Wu, W., 1 Jan 2019, In : Geoscience Frontiers.

  Research output: Contribution to journal › Article

  Open Access

  • crushing
  • digital elevation model
  • biaxial test
  • discrete element method
  • simulation

• A Comparative Study of Misapplied Crypto in Android and iOS Applications

  Feichtner, J., 2019, Proceedings of the 16th International Joint Conference on e-Business and Telecommunications - Volume 2: SECRYPT. Portugal: SciTePress, p. 96-108 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

  • Application programs
  • Application programming interfaces (API)
  • Cryptography
  • iOS (operating system)
  • Android (operating system)

• A comparative survey of power converter topologies for full-size converter operation of medium-voltage hydropower generators

  Holzer, T. & Muetze, A., Oct 2019, In : e&i - Elektrotechnik und Informationstechnik. 136, 6, p. 263–270

  Research output: Contribution to journal › Article

  • Power converters
  • Pumped storage power plants
  • Topology
  • Electric potential
  • Semiconductor switches

• A comparison of low carbon investment needs between China and Europe in stringent climate policy scenarios

  Zhou, W., McCollum, D. L., Fricko, O., Gidden, M., Huppmann, D., Krey, V. & Riahi, K., 13 May 2019, In : Environmental Research Letters. 14, 5, 054017.

  Research output: Contribution to journal › Article

  Open Access

  • Climate
  • environmental policy
  • China
  • Carbon
  • carbon

• A Complete Workflow for Automatic Forward Kinematics Model Extraction of Robotic Total Stations Using the Denavit-Hartenberg Convention

  Klug, C. H., Schmalstieg, D., Gloor, T. & Arth, C., 15 Aug 2019, In : Journal of Intelligent and Robotic Systems. 19 p.

  Research output: Contribution to journal › Article

  Open Access

  • Kinematics
  • Robotics
  • Simulators
  • Hardware
  • Calibration

• A Comprehensive FXR Signaling Atlas Derived from Pooled ChIP-seq Data

  Jungwirth, E., Panzitt, K., Marschall, H-U., Wagner, M. & Thallinger, G. G., 2019, In : Studies in Health Technology and Informatics. 260, p. 105-112 8 p.

  Research output: Contribution to journal › Article

  Open Access

  • Atlases
  • Transcription factors
  • Binding sites
  • Gene expression
  • Liver

• A concept for aortic dissection with fluid‐structure‐crack interaction

  Schussnig, R. & Fries, T. P., 2 Sep 2019, Proceedings in Applied Mathematics and Mechanics. 1 ed. Wiley, Vol. 19. 2 p. e201900100

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Dissection
  • Incompressible flow
  • Blood
  • Tissue
  • Fluids

• A Conceptual Modeling Framework for Evaluating the Performance of Predictive Maintenance for Modern, Real-World Production Systems using Potentials and Risks of Industry 4.0

  Gutschi, C., Furian, N., Pan, J. & Vössner, S., Nov 2019, 2019 4th International Conference on System Reliability and Safety, ICSRS 2019. Rome, Italy: Institute of Electrical and Electronics Engineers, p. 267-274 8 p. 8987658. (2019 4th International Conference on System Reliability and Safety, ICSRS 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Industry
  • Testbeds
  • Throughput
  • Availability
  • Conceptual modeling