Find Research Outputs

Search results

• 2019

  Identification of different positron trapping sites during artificial aging of a commercial light weight alloy

  Resch, L., Klinser, G., Sprengel, W. & Würschum, R., 27 Dec 2019, The 18th International Conference on Positron Annihilation (ICPA-18): AIP Conference Proceedings . Vol. 2182. p. 050012-1 - 050012-4 4 p. (AIP Conference Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • positrons
  • trapping
  • traps
  • precipitates
  • solutes

• Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework

  Zupan, D. & Deutschmann, B., 1 Jul 2019, SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings. Institute of Electrical and Electronics Engineers, p. 201-204 4 p. 8795218

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Post-processing
  • Interference
  • radio frequency interference
  • Processing
  • Python

• Identification of Faulty Operating Conditions in PEMFCs using EIS and Total Harmonic Distortion Analysis

  Mayer, K. & Hacker, V., 2 Jun 2019, Program of the 11th International Symposium on Electrochemical Impedance Spectroscopy. Vivier, V. (ed.).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Identification of Faulty Operating Conditions in PEMFCs using EIS and Total Harmonic Distortion Analysis

  Mayer, K. & Hacker, V., 4 Jun 2019.

  Research output: Contribution to conference › Poster

• Identification of Informative Time Frames for System Identification Purposes - A Time-Varying Order of Excitation Assessment Approach

  Genser, S., Stettinger, G. & Viehweger, M., 5 May 2019.

  Research output: Contribution to conference › Paper

• Identification of performance limitations of sensing technologies for automated driving

  Martin, H., Winkler, B., Grubmüller, S. & Watzenig, D., 8 Nov 2019.

  Research output: Contribution to conference › Paper

• Identifying and engineering the ideal microbial terpenoid production host

  Moser, S. & Pichler, H., 20 Jul 2019, In : Applied Microbiology and Biotechnology. 103, 14, p. 5501-5516 16 p.

  Research output: Contribution to journal › Review article

  Open Access

  • Terpenes
  • Cell Engineering
  • Biofuels
  • Saccharomyces cerevisiae
  • Carbon

• IEA EBC Annex 72 - Assessing life cycle related environmental impacts caused by buildings – targets and tasks

  Frischknecht, R., Birgisdottir, H., Chae, C-U., Lützkendorf, T. & Passer, A., Sep 2019, In : IOP Conference Series: Earth and Environmental Science. 323, 10 p., 012042.

  Research output: Contribution to journal › Article

  Open Access

  • environmental impact
  • life cycle
  • greenhouse gas
  • European Commission
  • environmental assessment

• IEA SHC TASK 51- AtlasKompakt: Solare Energie in der Stadtplanung

  Jakutyte-Walangitang, D., Berger, K., Gratzl-Michlmair, M., Mach, T., Malderle, M. & Rainer, E., Jan 2019, Bundesministerium für Verkehr, Innovation und Technologie . 87 p. (Berichte aus der Energie- und Umweltforschung)

  Research output: Book/Report › Commissioned report

• Ignition Concepts for Large-Bore Gas Engines – A Comparison of Spark, Laser and Diesel Pilot Ignition

  Zelenka, J., Pirker, G., Kiesling, C., Eder, L., Winter, H., Meyer, G. & Wimmer, A., 10 Jun 2019, p. 1-17. 17 p.

  Research output: Contribution to conference › Paper

  Open Access

  File

• Image-based center of mass estimation of the human body via 3D shape and kinematic structure

  Kaichi, T., Mori, S., Saito, H., Takahashi, K., Mikami, D., Isogawa, M. & Kusachi, Y., 2019, In : Sports Engineering. 22, 9 p., 17.

  Research output: Contribution to journal › Article

  • Studios
  • Kinematics
  • Cameras
  • Trajectories
  • Hardware

• Image Morphing in Deep Feature Spaces: Theory and Applications

  Effland, A., Kobler, E., Pock, T., Rajkovic, M. & Rumpf, M., 2019, In : arXiv.org e-Print archive.

  Research output: Contribution to journal › Article

  • Splines
  • Semantics
  • Experiments

• Image of O₂ dynamics released by oak wood submerged in model wine with nanoparticle sensors

  Prat-García, S., Martínez-Martínez, V., del Alamo-Sanza, M., Müller, B. J., Mayr, T. & Nevares, I., 2019, In : Sensors and Actuators, B: Chemical. 284, p. 337-345 9 p.

  Research output: Contribution to journal › Article

  • wines
  • Wine
  • Wood
  • Oxygen
  • Nanoparticles

• Immobilization of Polyiodide Redox Species in Porous Carbon for Battery-Like Electrodes in Eco-Friendly Hybrid Electrochemical Capacitors

  Abbas, Q., Fitzek, H. M., Schröttner, H., Dsoke, S. & Gollas, B., 3 Oct 2019, In : Nanomaterials. 9, 10, 1413.

  Research output: Contribution to journal › Article

  Open Access

  • Capacitors
  • Carbon
  • Iodides
  • Electrodes
  • Electrolytes

• Immunogold labeling of allergens on fine dust filters for SEM investigation.

  Rattenberger, J., Nachtnebel, M., Führer, B., Kirchnawy, C., Kaufmann, L., Hartl, C., Schröttner, H. & Ettenberger-Bornberg, G., 2019, Abstract MC 2019. p. 781 LS6.P001

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Immunogold labeling of allergens on fine dust filters for SEM investigation.

  Rattenberger, J., Nachtnebel, M., Führer, B., Kirchnawy, C., Kaufmann, L., Hartl, C., Schröttner, H. & Ettenberger-Bornberg, G., 2019.

  Research output: Contribution to conference › Poster

• Impact of drug particle shape on permeability and cellular uptake in the lung

  Zellnitz, S., Zellnitz, L., Müller, M. T., Meindl, C., Schröttner, H. & Fröhlich, E., 1 Nov 2019, In : European Journal of Pharmaceutical Sciences. 139, 105065.

  Research output: Contribution to journal › Article

  • Albuterol
  • Permeability
  • Budesonide
  • Macrophages
  • Lung

• Impact of Electron-Beam Heating during 3D Nanoprinting

  Mutunga, E., Winkler, R., Sattelkow, J., Rack, P., Plank, H. & Fowlkes, J. D., 2019, In : ACS Nano. 13, 5, p. 5198-5213 16 p.

  Research output: Contribution to journal › Article

  • Nanowires
  • Electron beams
  • electron beams
  • nanowires
  • Heating

• Impact of Foliar Grapevine Application of Inactive Dry Yeast on Aroma Profile of Chambourcin Wine

  Leis, D., Mayfield, S., Threlfall, R. & Leitner, E., 25 Jun 2019.

  Research output: Contribution to conference › Poster

• Impact of growth factors on wound healing in polysaccharide blend thin films

  Maver, U., Gradišnik, L., Smrke, D. M., Stana Kleinschek, K. & Maver, T., 30 Sep 2019, In : Applied Surface Science. 489, p. 485-493 9 p.

  Research output: Contribution to journal › Article

  • wound healing
  • polysaccharides
  • Polysaccharides
  • Intercellular Signaling Peptides and Proteins
  • Thin films

• Impact of insufficient ventilation during post-harvest ripening on the flavour of mangoes (Mangifera indica)

  Lehner, T. & Siegmund, B., 2019.

  Research output: Contribution to conference › Poster

• IMPACT OF OXYGEN VACANCIES ON ELEC-TRONIC PROPERTIES OF ANATASE THIN FILMS

  Knez, D., Dražić, G., Chaluvadi, S. K., Origani, P. & Ciancio, R., 2019.

  Research output: Contribution to conference › Abstract

  Open Access

• IMPACT OF RELATIVE HUMIDITY AND POWDER FILLING LEVEL ON THE ELECTROSTATIC CHARGING BEHAVIOUR OF DIFFERENT CAPSULE TYPES

  Wutscher, T., Zellnitz, S., Kobler, M., Buttini, F., Andrade, L., Daza, V., Mercandelli, A., Biserni, S., Ecenarro Probst, S., Khinast, J. & Paudel, A., 1 Apr 2019, In : Journal of Aerosol Medicine and Pulmonary Drug Delivery . 32, 2, p. A9-A10

  Research output: Contribution to journal › Abstract

• Impact of Surface Defects on the Charge Transfer at Inorganic/Organic Interfaces

  Wruss, E., Hörmann, L. & Hofmann, O. T., 28 Mar 2019, In : The Journal of Physical Chemistry / C. 123, 12, p. 7118-7124 7 p.

  Research output: Contribution to journal › Article

  • Surface defects
  • surface defects
  • Charge transfer
  • charge transfer
  • Defects

• Impact of the Ink Formulation and Coating Speed on the Polymorphism and Morphology of a Solution-Sheared Thin Film of a Blended Organic Semiconductor

  Tamayo, A., Riera-Galindo, S., Jones, A. O. F., Resel, R. & Mas-Torrent, M., 1 Nov 2019, In : Advanced Materials Interfaces . 6, 22, 1900950.

  Research output: Contribution to journal › Article

  • Semiconducting organic compounds
  • Polymorphism
  • Ink
  • Thin films
  • Coatings

• Impact of thermal transport parameters on the operating temperature of OLEDs

  Krikun, G. & Zojer, K., 28 Feb 2019, In : Journal of Applied Physics. 125, 10 p., 085501.

  Research output: Contribution to journal › Article

  • operating temperature
  • light emitting diodes
  • heat
  • thermal conductivity
  • heat transfer

• Impact of varying high- and low-pressure turbine purge flows on a turbine center frame and low-pressure turbine system

  Sterzinger, P. Z., Zerobin, S., Merli, F., Wiesinger, L., Peters, A., Maini, G., Dellacasagrande, M., Heitmeir, F. & Göttlich, E., 1 Jan 2019, Turbomachinery. American Society of Mechanical Engineers(ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Turbines
  • Ducts
  • Inlet flow
  • Secondary flow
  • Flow rate

• Impedance matched electrical capacitance tomography system: front-end design and system analysis

  Flatscher, M., Neumayer, M. & Bretterklieber, T., 12 Aug 2019, In : Measurement science & technology. 30, 10, 12 p., 104002.

  Research output: Contribution to journal › Article

  Open Access

  • Electrical Capacitance Tomography
  • design analysis
  • systems analysis
  • Systems Analysis
  • Impedance

• Implementation of Multi-objective Particle Swarm Optimization in Distribution Network for High-efficiency Allocation and Sizing of SAPFs

  Yang, Z., Zhuo, F., Tao, R., Zhang, Z., Yi, H., Wang, M. & Zhu, C., 1 Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers, 8922399. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Distribution Network
  • Electric power distribution
  • Multi-objective Optimization
  • Particle swarm optimization (PSO)
  • Particle Swarm Optimization

• Implementation of Sustainable Business Models in Technology-Dominant Innovation Projects: Embedding Sustainable Business Models in Business Processes

  Url, P. & Vorraber, W., Jul 2019, Proceedings of the 4th International Conference on New Business Models: New Business Models for Sustainable Entrepreneurship, Innovation, and Transformation. Lüdeke-Freund, F. & Froese, T. (eds.). Berlin, Germany, p. 826-830 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Innovation
  • Sustainable business
  • Business process
  • Business model
  • Sustainability

• Implementation of Sustainable Development Goals in construction industry - a systemic consideration of synergies and trade-offs

  Wieser, A. A., Scherz, M., Maier, S., Passer, A. & Kreiner, H., 2019, SBE19 Graz - Sustainable Built Environment D-A-CH Conference 2019: Transition Towards a Net Zero Carbon Built Environment. Verlag der Technischen Universität Graz, p. 198

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Implementierung eines Cyber-physischen Systems in der Intralogistik: IoT in der Fördertechnik

  Mörth, O., Emmanouilidis, C., Hafner, N. & Schadler, M., 22 May 2019, p. 207-211. 1 p.

  Research output: Contribution to conference › Poster

  Open Access

• Implementing contractor know-how in early phases of complex infrastructure projects

  Paar, L., Ninaus, C. & Heck, D., 1 Jan 2019, ISEC 2019 - 10th International Structural Engineering and Construction Conference. Ozevin, D., Ataei, H., Modares, M., Gurgun, A. P., Yazdani, S. & Singh, A. (eds.). ISEC Press, (ISEC 2019 - 10th International Structural Engineering and Construction Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Contractors
  • Construction industry
  • Project management
  • Industry

• Implementing homogenous behavioral groups for bicycle transportation in macroscopic transportation models

  van Dulmen, A., Hebenstreit, C. & Fellendorf, M., 2019, In : Transportation Research Procedia. 41, p. 292 294 p.

  Research output: Contribution to journal › Conference article

• Implementing sustainable sourcing in construction: Results of a current analysis of the Austrian market

  Wall, J. & Hofstadler, C., 5 Sep 2019, In : IOP Conference Series: Earth and Environmental Science. 323, 1, 012169.

  Research output: Contribution to journal › Conference article

  Open Access

  • market
  • sustainability
  • construction industry
  • planning process
  • European Union

• Importance of medical data preprocessing in predictive modeling and risk factor discovery for the frailty syndrome

  Hassler, A. P., Menasalvas, E., García-García, F. J., Rodríguez-Mañas, L. & Holzinger, A., 18 Feb 2019, In : BMC Medical Informatics and Decision Making. 19, 1, 33.

  Research output: Contribution to journal › Article

  Open Access

  • Clinical Decision Support Systems
  • Data Mining
  • Health
  • Life Expectancy
  • Hospitalization

• Improved Charge Separation and Photovoltaic Performance of BiI3 Absorber Layers by Use of an In Situ Formed BiSI Interlayer

  Yoo, B., Ding, D., Marin-Beloqui, J. M., Lanzetta, L., Bu, X., Rath, T. & Haque, S. A., 28 Oct 2019, In : ACS Applied Energy Materials. 2, 10, p. 7056-7061

  Research output: Contribution to journal › Article

• Improved coupling strategy to cover curved FE-facets in the non-conforming mesh method

  Wallinger, G. & Biro, O., 5 Mar 2019, In : IEEE Transactions on Magnetics.

  Research output: Contribution to journal › Article

• Improved remaining fatigue life of an orthotropic bridge deck - combination of analyses, tests and measurements

  Unterweger, H., Sep 2019, Nordic Steel Construction Conference 2019 - Proceedings. Kopenhagen, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Improved Topological Approximations by Digitization

  Choudhary, A., Kerber, M. & Raghvendra, S., 2019, Proceedings of the Thirtieth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA 2019, San Diego, California, USA, January 6-9, 2019. Philadelphia: SIAM - Society of Industrial and Applied Mathematics, p. 2675-2688

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Digitization
  • Approximation
  • Approximation Scheme
  • Euclidean space
  • Sample point

• Improvement of Lane Keeping Assistance ADAS Function utilizing a Kalman Filter Prediction of Delayed Position States

  Solmaz, S., Nestlinger, G. & Stettinger, G., 8 Nov 2019.

  Research output: Contribution to conference › Paper

• Improvements in Environmental Scanning Electron Microscopy –Universal Pressure Scanning Electron Microscopy (UPSEM)

  Rattenberger, J., Fitzek, H. M., Schröttner, H. & Hofer, F., 2019, Proceedings-14th Multinational Congress on Microscopy, Belgrad-Serbia, Sept. 15-20 2019. p. 104-106

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Improving CAD/CAM Process Chains in Forging Industries in the Era of Digitalization Based on a Case Study

  Brillinger, M., Martinez, J. C. & Schmid, J., 17 Aug 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19). 7 p. Paper No. ICMIE 121

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Computer aided manufacturing
  • Forging
  • Computer aided design
  • Decision making
  • Industry

• Improving Pellet Quality in a Pharmaceutical Hot Melt Extrusion Process via PID Control and LOLIMOT-Based MPC

  Rehrl, J., Kirchengast, M., Celikovic, S., Sacher, S., Kruisz, J., Khinast, J. & Horn, M., 2019, In : Journal of pharmaceutical innovation. 12 p.

  Research output: Contribution to journal › Article

  Open Access

  • Particle Size
  • Linear Models
  • Pharmaceutical Preparations
  • Temperature

• Improving temporal resolution of 3D Arterial Spin Labeling perfusion imaging by combining CAIPIRINHA encoding and spatio-temporal TGV reconstruction

  Spann, S. M., Shao, X., Wang, D. JJ., Aigner, C. S., Schlögl, M., Bredies, K. & Stollberger, R., 2019, Proc. Intl. Soc. Mag. Reson. Med. 27.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

  Rabl, A., Pixner, F., Duarte, B., Blatesic, D., Beal, C. & Enzinger, N., 8 Mar 2019, In : Welding in the World. 63, 2, p. 575-582 8 p.

  Research output: Contribution to journal › Article

  Open Access

  • Martensitic steel
  • Steel
  • Alloying
  • Electron beams
  • Creep

• Improving the Representation of Flow in Complex Terrainby Regional-Local Scale Model Coupling

  Uhrner, U., Werhahn, J., Reifeltshammer, R. J. & Forkel, R., 12 Mar 2019.

  Research output: Contribution to conference › Paper

• Improving the Timeliness of Bluetooth Low Energy in Noisy RF Environments

  Spörk, M., Boano, C. A. & Römer, K. U., 25 Feb 2019.

  Research output: Contribution to conference › Paper

• Impurity effects at hydrophobic surfaces

  Uematsu, Y., Bonthuis, D. J. & Netz, R. R., 1 Feb 2019, In : Current Opinion in Electrochemistry. 13, p. 166-173 8 p.

  Research output: Contribution to journal › Review article

  • Impurities
  • Electrolytes
  • Surface tension
  • Anionic surfactants
  • Ions

• Incorporation of heavy metals (Co, Cu, Zn) in synthetic calciumaluminium-silicate-hydrate (C-A-S-H) gel structures: environmentalimplications for metal ion transport in aqueous media

  Preisegger, V., Baldermann, A., Landler, A., Steindl, F. R., Letofsky-Papst, I., Simic, S., Eichinger, S. & Dietzel, M., 2019.

  Research output: Contribution to conference › Poster