Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters
2001

Standards for biomedical signal databases

Värri, A., Kemp, B., Penzel, T. & Schlögl, A., 2001, In : IEEE engineering in medicine and biology magazine. 20, 3, p. 33-37

Research output: Contribution to journalArticleResearchpeer-review

1978

Auswertung von Ultraschall-Echoverteilungen

Leitgeb, N. & Schuy, S., 31 May 1978.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2010

Efficiency Determination of Standard Asynchronous Machines from Start-Up Data

Bacher, J. P. & Waldhart, F., 2010, Proceedings of The XIX International Conference on Electrical Machines on CD. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Extraction of Speech-Relevant Information from Modulation Spectrograms

Markaki, M., Wohlmayr, M. & Stylianou, Y., 2007, Progress in Nonlinear Speech Processing. 1 ed. Berlin / Heidelberg: Springer, p. 78-88 (Lecture Notes in Computer Science).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

1998

Noninvasive functional imaging of cardiac de- and repolarization

Tilg, B., Wach, P., Modre, R., Fischer, G. & Lafer, G., 1998, Biomedizinische Technik, Gemeinsame Jahrestagung der Österreichischen Gesellschaft für Biomedizinische Technik und der Österreichischen Gesellschaft für Medizinische Physik. ., p. 135-137

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Towards multimodal error responses: a passive BCI for the detection of auditory errors

Zander, T., Klippel, D. M. & Scherer, R., 2011, Proceedings of the 13th international conference on multimodal interfaces (ICMI'11). New York: Association of Computing Machinery, p. 53-56

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Frame Change Ratio: A Measure to Model Short-time Stationarity of Speech

Ehsan, M. S. & Kubin, G., 2006, Proceedings of IEEE IIT 2006. Dubai: Institute of Electrical and Electronics Engineers, p. 19112006-21112006

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

The Ecuadorian Civilian Space Program: Near-future manned research missions in a low cost, entry level space program

Nader, R., Salazar, P. & Jaffer, G., 26 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2014

AR-based Hologram Detection on Security Documents using a Mobile Phone

Hartl, A. D., Arth, C. & Schmalstieg, D., 2014, International Symposium on Visual Computing. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Incremental Structural Modeling Based on Geometric and Statistical Analyses

Roberto, R., Paulo Lima, J., Uchiyama, H., Arth, C., Teichrieb, V., Taniguchi, R. & Schmalstieg, D., 2018, Proc. Winter Conference on Application of Computer Vision (WACV).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Geospatial Management and Utilization of Large-Scale Urban Visual Reconstructions

Arth, C., Ventura, J. D. & Schmalstieg, D., 2013, Proc. of the 4th Int. Conf. on Computing for Geospatial Research & Application (COM.Geo 2013). ., p. 64-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

A Robust Exact Differentiator Toolbox for Matlab/Simulink

Reichhartinger, M., Spurgeon, S., Forstinger, M. & Wipfler, M., 2017, 20th IFAC World Congress, Toulouse, France. p. 1747 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Mobile User Interfaces for Efficient Verification of Holograms

Hartl, A. D., Grubert, J., Reinbacher, C., Arth, C. & Schmalstieg, D., 2015, Virtual Reality Conference. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Particle Filter Approach to Outdoor Localization using Image-based Rendering

Poglitsch, C., Arth, C., Schmalstieg, D. & Ventura, J., 2015.

Research output: Contribution to conferencePosterResearch

2017

Measurements of ingress in upstream and downstream turbine wheel-spaces

Patinios, M., Scobie, J. A., Sangan, C. M. & Lock, G. D., 2017, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Steps towards GPU Accelerated Aggregation AMG

Emans, M., Liebman, M. & Basara, B., 25 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2001

Divide and compose: SCC refinement for language emptiness

Wang, C., Bloem, R. P., Hachtel, G. D., Ravi, K. & Somenzi, F., 2001, CONCUR 2001 - Concurrency Theory. Berlin: Springer, Vol. 2154. p. 456-471 (Lecture notes in computer science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Optimizations for LTL synthesis

Jobstmann, B. & Bloem, R. P., 2006, International Conference on Formal Methods in Computer-Aided Design. ., p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Methods of Forming Veneer Structures

Grabner, M., Wolf, A., Schwabl, E. & Schickhofer, G., 22 Aug 2016, WCTE 2016: World Conference on Timber Engineering. 10 p. 1027_a

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Exploiting Cooccurrence on Corpus and Document Level for Fair Crosslanguage Retrieval

Juffinger, A., Kern, R. & Granitzer, M., 2008, Working Notes for the CLEF 2008 Workshop. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

External and Intrinsic Plagiarism Detection using a Cross-Lingual Retrieval and Segmentation System Lab Report for PAN at CLEF 2010

Muhr, M., Kern, R., Zechner, M. & Granitzer, M., 2010, 2nd International Competition on Plagiarism Detection. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Model Selection Strategies for Author Disambiguation

Kern, R., Zechner, M. & Granitzer, M., 2011, Database and expert systems applications. ., p. 155-159

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Kunst und Kommerz

Lechner, A., 5 Aug 2007, Falter, p. 11-12.

Research output: Contribution to specialist publicationArticleResearch

2010

Procedural Modeling in Theory and Practice

Ullrich, T., Schinko, C. & Fellner, W-D., 2010, Proceeding of the 18th WSCG International Conference on Computer Graphics, Visualization and Computer Vision. ., p. 5-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Current-carrying characteristics of conductive microfiber rings for high frequencies and current amplitudes

Mütze, A. & Oh, H. W., 2008, Proceedings of the 43rd IEEE IAS Annual Conference. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Influence of electric discharge activity on bearing lubricating grease degradation

Romanenko, A., Mütze, A. & Ahola, J., 2015, IEEE Energy Conversion Congress and Exposition. ., p. 4851-4856

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Non-Linear Space-Dependency of Main and Differential Inductances of Permanent Magnet Electric Machines

Bacher, J. P. & Muetze, A., 19 Jun 2018, SPEEDAM 2018 – Proceedings. p. 286-291 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Computation of Induced Voltages and Currents in the Field Winding of Wound-Field Synchronous Machines under Transient Conditions

Bacher, J. P., Maier, M. & Mütze, A., 2014, Proceedings of the 2014 International Conference on Electrical Machines (ICEM). ., p. 86-92

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Simulation model of common-mode chokes for high-power applications

Sullivan, C. R. & Mütze, A., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 1810-1815

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Economic factors and incentives for ocean wave energy conversion

Vining, J. G. & Mütze, A., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 756-763

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Thermal vehicle integration of an integrated starter-generator

Paar, C. J. & Mütze, A., 2015, Proceedings of the 7th IEEE Transportation Electrification Conference and Exposition (ECCE). ., p. 106-111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Low-cost low-power test-bed for experimental investigation of common-mode chokes for high-power applications

Mütze, A. & Heng, B. S., 2007, 2007 IEEE International Electric Machines and Drives Conference. Institute of Electrical and Electronics Engineers, p. 1582-1586

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

A contribution to identification of convex structures for global optimization of permanent magnet machines

Mütze, A., 2005, Proceedings of the 40th IEEE IAS Annual Conference. ., p. 266-273

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2013, Proc. of the 8th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1289-1294

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Kolbe, H. & Mütze, A., 2014.

Research output: Contribution to conferencePosterResearch

2007

Application of static charge dissipation to mitigate electric discharge bearing currents

Mütze, A. & Oh, H. W., 2007, Proceedings of the IEEE 5th IEMDC. ., p. 1059-1066

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design aspects of conductive microfiber rings for shaft grounding purposes

Mütze, A. & Oh, H. W., 2007, Proceedings of the 42nd IEEE IAS Annual Conference. ., p. 229-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. & Mütze, A., 2016, Applied Power Electronics Conference and Exposition. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Generation of high frequency common mode currents in machines of inverter-based drive systems

Mütze, A. & Binder, A., 2005, Proceedings of the 11th EPE, paper no. 492. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Discussion of a new rocking buoy reaction based wave energy converter topology

Gemmell, R. & Mütze, A., 2010, XIX International Conference on Electrical Machines (ICEM). Piscataway, NJ: Institute of Electrical and Electronics Engineers, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePosterResearchpeer-review

2009

Analytic force calculation in brushless-DC motors II: mathematical details of the alternative approach

Starschich, E., Mütze, A. & Hameyer, K., 2009, Proceedings of the IEEE 6th IEMDC. ., p. 1208-1215

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Compilation of procedural models

Ullrich, T., Krispel, U. & Fellner, W-D., 2008, Proceedings of the 13th International Symposium on 3D Web Technology (Web3D 2008). Association of Computing Machinery, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Fast and Exact Plane Based Representation for Polygonal Meshes

Krispel, U., Ullrich, T. & Fellner, W-D., 2014, Proceedings of the International Conferences of CGVCVIP. IADIS Press, p. 189-196

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

The Potential of 3D Internet in the Cultural Heritage Domain

Santos, P., Peña Serna, S., Stork, A. & Fellner, W-D., 2014, 3D Research Challenges in Cultural Heritage. 1 ed. Berlin, Heidelberg, New York: Springer, p. 1-17

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2013

Grammar Checker Features for Author Identification and Author Profiling

Kern, R., 2013, CLEF 2013 Evaluation Labs and Workshop – Working Notes Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Comparison between Finite Element and Hybrid Finite Element Results to Test Data for the Vibration of a Production Car Body

Vlahopoulos, N., Sander, D. E., Sungmin, L., Böhler, E. & Zhang, G., 13 Jun 2019.

Research output: Contribution to conferencePaperResearchpeer-review

2014

Who will Trade with Whom? Predicting Buyer-Seller Interactions in Online Trading Platforms through Social Networks

Trattner, C., Parra, D., Eberhard, L. & Wen, X., 2014, Proceedings of the 24nd international World Wide Web Conferences Steering Committee.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review