Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Annette Mütze
2014

Computation of Induced Voltages and Currents in the Field Winding of Wound-Field Synchronous Machines under Transient Conditions

Bacher, J. P., Maier, M. & Mütze, A., 2014, Proceedings of the 2014 International Conference on Electrical Machines (ICEM). ., p. 86-92

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Thermal vehicle integration of an integrated starter-generator

Paar, C. J. & Mütze, A., 2015, Proceedings of the 7th IEEE Transportation Electrification Conference and Exposition (ECCE). ., p. 106-111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Impacts of Voltage Dips on the Behavior of Single Phase Induction Machines

Bacher, J. P. & Mütze, A., 2016, p. 452. 457 p.

Research output: Contribution to conferencePosterResearchpeer-review

2015

Influence of electric discharge activity on bearing lubricating grease degradation

Romanenko, A., Mütze, A. & Ahola, J., 2015, IEEE Energy Conversion Congress and Exposition. ., p. 4851-4856

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of PM free brushless AC machine based actuators for elevated temperature environments

Lang, K., Muetze, A., Bauer, R. & Rossegger, W., 2015, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 696-702 7 p. 7409135

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2013, Proc. of the 8th IEEE International Electric Machines and Drives Conf. (IEMDC). ., p. 1289-1294

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. & Mütze, A., 2016, Applied Power Electronics Conference and Exposition. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Design constraints of small single-phase permanent magnet brushless DC drives for a cooling application

Dunkl, S., Mütze, A. & Schöner, G., 2013, Proceedings of 5th IEEE Energy Conversion Conference and Exhibition. ., p. 4300-4305

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Thermal performance modeling of foil wound concentrated coils in electric machines

Rios, M. & Mütze, A., Sep 2016, p. 1-8.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Non-Linear Space-Dependency of Main and Differential Inductances of Permanent Magnet Electric Machines

Bacher, J. P. & Muetze, A., 19 Jun 2018, SPEEDAM 2018 – Proceedings. p. 286-291 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Kolbe, H. & Mütze, A., 2014.

Research output: Contribution to conferencePosterResearch

2012

Conceptual design of a direct helicopter energy storage system

Wood, P. & Mütze, A., 2012, IET International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Experimental determination of specific power losses and magnetostriction of electrical steel coils

Tanzer, T., Mütze, A. & Krischan, K., 2016, p. 1.

Research output: Contribution to conferencePosterResearch

Minimization of the Synrel’s Oscillating Torque by Calculation of the Appropriate Skew Angle

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., 2016, Proceedings : XXIV Symposium Electromagnetic Phenomena in Nonlinear Circuits: June 28 - July 1, 2016, Helsinki, Finland : EPNC 2016. Helsinki: Aalto University, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A two-step analytic design and optimization of small variable speed PMSMs for home appliances

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., Sep 2016. 10 p.

Research output: Contribution to conferencePosterResearchpeer-review

2017

Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers

Tanzer, T., Pregartner, H., Mütze, A. & Krischan, K., 21 May 2017, p. 1-6.

Research output: Contribution to conferencePosterResearchpeer-review

2014

On radio-frequency based detection of high-frequency circulating bearing current flow

Mütze, A., Niskanen, V. & Ahola, J., 2014, In : IEEE Transactions on Industry Applications. 50, 4, p. 2592-2601

Research output: Contribution to journalArticleResearchpeer-review

2016

Comparison of Induction and Synchronous Reluctance Machine Based Actuators for Elevated Temperature Environments

Lang, K., Mütze, A., Bauer, R. & Stefan, P., 2016, In : IEEE Transactions on Energy Conversion. 31, 3, p. 1012-1022

Research output: Contribution to journalArticleResearchpeer-review

Design of PM free AC machine based actuators for elevated temperature environments

Lang, K., Mütze, A., Bauer, R. & Rossegger, W., 2016, In : IEEE Transactions on Industry Applications. 52, 3, p. 2241-2252

Research output: Contribution to journalArticleResearchpeer-review

Thermal Real-Time Monitoring of a Gearbox Integrated IPM Machine for Hybrid-Electric Traction

Paar, C. J. & Mütze, A., 11 May 2016, In : IEEE Transactions on Transportation Electrification. 2, 3, p. 369-379

Research output: Contribution to journalArticleResearchpeer-review

2012

Measurement of stator core magnetic degradation during the manufacturing process

Clerc, A. J. & Mütze, A., 2012, In : IEEE Transactions on Industry Applications. 48, 4, p. 1344-1352

Research output: Contribution to journalArticleResearchpeer-review

2015

3-D FEM calculation of electromagnetic properties of single-phase induction machines

Bacher, J., Muetze, A. & Waldhart, F., 2015, In : IEEE Transactions on Energy Conversion. 30, 1, p. 142-149 8 p., 6894206.

Research output: Contribution to journalArticleResearchpeer-review

2013

On the role of the shaft end and the influence of frame size and load coupling on the RF emission characteristics of induction motors

Niskanen, V., Mütze, A. & Ahola, J., 2013, In : EPE journal. 23, 4, p. 42-50

Research output: Contribution to journalArticleResearchpeer-review

2011

Radio-frequency-based detection of electrical discharge machining bearing currents

Ahola, J., Särkimäki, V., Mütze, A. & Tamminen, J., 2011, In : IET electric power applications. 5, 4, p. 386-392

Research output: Contribution to journalArticleResearchpeer-review

2017

Minimization of a SynRel’s oscillating torque by calculation of the appropriate skew angle

Martinez Garcia Tenorio, J., Krischan, K. & Mütze, A., 2017, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 36, 3, p. 824-835 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of a soft-switching flyback converter with full secondary side based control

Connaughton, A., Talei, A. P., Leong, K., Krischan, K. & Mütze, A., 2017, In : IEEE Transactions on Industry Applications. 53, 6, p. 5587-5601

Research output: Contribution to journalArticleResearchpeer-review

A Power Supply Achieving Titanium Level Efficiency for a Wide Range of Input Voltages

Konrad, W., Deboy, G. J. & Mütze, A., Jan 2017, In : IEEE Transactions on Power Electronics. 1, 32, p. 117-127 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2016

New control concept for soft-switching Flyback converters with very high switching frequency

Connaughton, A., Krischan, K., Leong, K. K. & Mütze, A., 12 May 2016, Applied Power Electronics Conference and Exposition (APEC), 2016 IEEE. Institute of Electrical and Electronics Engineers, p. 355-361

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2018

Full-Size Converter Operation of Large Hydro Power Generators: Generator Design Aspects

Holzer, T. & Muetze, A., 6 Dec 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE). p. 7363-7368

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2012

Finite-element supported transmission-line models for calculating high-frequency effects in machine windings

De Gersem, H. & Mütze, A., 2012, In : IEEE Transactions on Magnetics. 48, 2, p. 787-790

Research output: Contribution to journalArticleResearchpeer-review

2015

Influence of Machine Integration on the Thermal Behavior of a PM Drive for Hybrid Electric Traction

Paar, C. J., Mütze, A. & Kolbe, H., 2015, In : IEEE Transactions on Industry Applications. 51, 5, p. 3914-3922

Research output: Contribution to journalArticleResearchpeer-review

2014

On inverter induced bearing currents, bearing maintenance scheduling, and prognosis

Mütze, A. & Strangas, E., 17 Nov 2014, Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014. Institute of Electrical and Electronics Engineers, p. 1915-1921 7 p. 6960445

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Normalization-based approach to electric motor BVR related capacitances computation

Ahola, J., Muetze, A., Niemela, M. & Romanenko, A., 18 Apr 2018, APEC 2018 - 33rd Annual IEEE Applied Power Electronics Conference and Exposition. Institute of Electrical and Electronics Engineers, Vol. 2018-March. p. 2868-2874 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermal Performance Modeling of Foil Conductor Concentrated Windings in Electric Machines

Rios, M., Venkataraman, G., Muetze, A. & Eickhoff, H. T., Oct 2018, In : IEEE Transactions on Industry Applications. 54, 5, p. 4104-4113

Research output: Contribution to journalArticleResearchpeer-review

2017

Electric machine utilization during the post-fault operation after inverter open circuit faults

Eickhoff, H., Strangas, E. G. & Mütze, A., 2017, Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Institute of Electrical and Electronics Engineers, p. 201-207 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Thermal performance modeling of foil wound concentrated coils in electric machines

Rios, M., Venkataramanan, G., Mütze, A. & Eickhoff, H., Sep 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE Xplore, p. 1-8 (IEEE Energy Conversion Congress and Exposition (ECCE)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Influences of CO2 and FKL-laser cutting as well as mechanical cutting on the magnetic properties of electric steel sheets determined by Epstein frame and stator lamination stack measurements

Bali, M. & Muetze, A., 11 Nov 2014, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers, p. 1443-1450 8 p. 6953562

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Consideration of steel degradation due to punching in finite element modeling of electric machines

Bali, M. S. J., De Gersem, H. & Mütze, A., 2012, Proceedings XXIIth Symposium EPNC Electromagnetic Phenomenon in Nonlinear Circuits. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Finite-element supported transmission-line models for calculating high-frequency effects in machine windings

De Gersem, H. & Mütze, A., 2011, Conference on the Computation of Electromagnetic Fields. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers

Leitner, S., Yazdanian, M., Mehrizi-Sani, A. & Mütze, A., 2017.

Research output: Contribution to conferencePosterResearch

2016

INTERNAL MODEL-BASED CONTROL STRATEGIES FOR VOLTAGE SOURCE CONVERTERS

Leitner, S., 2016

Research output: ThesisMaster's ThesisResearch

2014

Finite-element modelling of magnetic material degradation due to punching

Bali, M. S. J., De Gersem, H. & Mütze, A., 2014, In : IEEE Transactions on Magnetics. 50, 2, p. 7018404-4 Seiten

Research output: Contribution to journalArticleResearchpeer-review

2016

Effects of Electrostatic Discharges on Bearing Grease Dielectric Strength and Composition

Romanenko, A., Mütze, A. & Ahola, J., 2016, In : IEEE Transactions on Industry Applications. 52, 6, p. 4835-4842

Research output: Contribution to journalArticleResearchpeer-review

2017

Improved Switching Strategy for a Single-Phase Brushless Direct Current Motor and its Impact on Motor Efficiency

Grübler, H., Leitner, S., Muetze, A. & Schoener, G., 3 Aug 2017, 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017. Institute of Electrical and Electronics Engineers, 8002331

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Improved Switching Strategy for a Single-Phase Brushless Direct Current Motor and its Impact on Motor Efficiency

Grübler, H., Leitner, S., Mütze, A. & Schöner, G., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

2019

Cogging Torque Minimization and Performance of the Sub-Fractional HP BLDC Claw-Pole Motor

Leitner, S., Grübler, H. & Muetze, A., 18 Jun 2019, In : IEEE Transactions on Industry Applications. 2019, 5, p. 4653-4664 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2016

Simulating the change of magnetic properties of electrical steel sheets due to punching

Woehrnschimmel, R., Muetze, A., Ertl, S., Kapeller, H., Winter, O. & Horwatitsch, DI., 16 Feb 2016, Proceedings - 2015 IEEE International Electric Machines and Drives Conference, IEMDC 2015. Institute of Electrical and Electronics Engineers, p. 1324-1328 5 p. 7409233

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Foil conductor concentrated coil windings for modular permanent magnet AC machines

Rios, M., Venkataramanan, G. & Mütze, A., Oct 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE Xplore, p. 1191 - 1196 (IEEE Energy Conversion Congress and Exposition (ECCE)).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Control implementation for a wide voltage range high efficiency power supply utilizing low voltage MOSFETs

Konrad, W., Deboy, G. J. & Mütze, A., 20 Mar 2016.

Research output: Contribution to conferencePosterResearch