Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2011

Author

  • Christof Sommitsch
2011

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2014

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File
2013

Study of Creep damage in a 10.86% Cr Heat Resistant Steel using Synchrotron X-ray Microtomography

Gupta, C., Toda, H., Schlacher, C., Mayr, P., Sommitsch, C., Uesugi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Advanced Materials Research. 794, p. 476-483

Research output: Contribution to journalArticleResearchpeer-review

2015

Foreword

Sommitsch, C. & Hribernik, B., 1 Jan 2015, 8th European Stainless Steel and Duplex Stainless Steel Conference 2015. 1 p.

Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptResearch

2013

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Sommitsch, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O. & Zurek, J., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2013, In : Wear. 314, p. 28-35

Research output: Contribution to journalArticleResearchpeer-review

2015

CORROSION RESISTANCE OF LINEAR FRICTION WELDED CHAIN LINKS

Gsellmann, B., Huemer, W., Vallant, R. & Sommitsch, C., 2015.

Research output: Contribution to conferencePaperResearch

2016

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012001.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition

Vollmer, R. & Sommitsch, C., 16 Oct 2017, AIP Conference Proceeedings 1896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2014

STUDY OF CREEP DAMAGE IN CREEP EXPOSED MARTENSITIC HIGH CHROMIUM STEEL WELDMENTS

Schlacher, C., Beal, C., Sommitsch, C., Toda, H. & Mayr, P., 2014, International Conference on Advances in Materials Technology for Fossil Power Plants. ., p. 914-922

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

2015

Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : Steel research international. 85, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

2017

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2019

Thermomechanical Wear Testing of Metal Matrix Composite Cladding for Potential Application in Hot Rolling Mills

Domitner, J., Aigner, M., Stern, T., Paar, A., Sommitsch, C. & Elizondo, L., 2019, In : Steel research international. 10 p., 1900478.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2015

Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels

Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.

Research output: Contribution to conferencePosterResearch

2017

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

2018

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

2013

RULE-BASED EXPERT SYSTEM APPLICATION TO OPTIMIZING OF MULTISCALE MODEL OF HOT FORGING AND HEAT TREATMENT OF TI-6AL-4V

Maciol, P., Krumphals, A., Jędrusik, S., Macioł, A. & Sommitsch, C., 2013, V Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2013). ., p. 1237-1248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2014

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 11 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

2014

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Timoshenkov, A., Warczok, P., Albu, M., Jürgen, K., Ernst, K., Gruber, G. & Sommitsch, C., 2014, In : Steel research international. 85, 6, p. 954-967

Research output: Contribution to journalArticleResearchpeer-review

2015

Creep and damage investigations of MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 2015, (Accepted/In press) Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File
2016

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 15 Nov 2016, In : Wear. 366-367, p. 71-77 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 30 Aug 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2014

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 294-295

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Stojan, V., Coline, B., Christof, S., Farooq, M., Rolf, S. & Joanna, Z., 1 Jan 2014, p. 1163-1172. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

2018

GUEST EDITORIAL

Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., 1 Oct 2018, In : Journal of Materials Engineering and Performance. 27, 10, p. 4981-4982 2 p.

Research output: Contribution to journalEditorialResearchpeer-review

2019

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2016

Retardation of fatigue crack growth in high strength steel S690 using a modified stop-hole technique

Razavi, S. M. J., Ayatollahi, M. R., Sommitsch, C. & Moser, C., 23 Nov 2016, In : Engineering fracture mechanics. 169, 0013-7944, p. 226 - 237

Research output: Contribution to journalArticleResearchpeer-review

Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment

Belyaev, A. K., Polyanskiy, A. M., Polyanskiy, V. A., Sommitsch, C. & Yakovlev, Y. A., 2016, In : International Journal of Hydrogen Energy. 41 , 20, p. 8627-8634

Research output: Contribution to journalArticleResearchpeer-review

2017

Preface

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T., 1 Jan 2017, In : Materials Science Forum. 879

Research output: Contribution to journalEditorialResearch

2013
2015

Study on governing parameters of thermal history during underwater friction stir welding

Papahn, H., Bahemmat, P., Haghpanahi, M. & Sommitsch, C., 1 May 2015, In : International Journal of Advanced Manufacturing Technology. 78, 5-8, p. 1101-1111 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2019

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

2017
2019

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2011

Loss of ductility caused by AlN precipitates in Hadfield steel

Radis, R., Schlacher, C., Mayr, P., Enzinger, N., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Electron Beam Processing for the Production of Model Alloys

Spenger, T., Enzinger, N., Hofer, F., Simic, S., Sommitsch, C. & Wiednig, C. A., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 22, p. 127-132 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2020

Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures

Jabbari, A. H., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, In : International Journal of Fatigue. 139, 105803.

Research output: Contribution to journalArticleResearchpeer-review

2011

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2014

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, First International Conference on Structural Integrity.. ., p. 225-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review