Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2013
  • 2012
  • 2011

Author

  • Christof Sommitsch
2013

Physical Simulation of the Hot Ductility of In-situ Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 16 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 12 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss

Hadžić, S., Hanus, R. & Sommitsch, C., 23 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 5 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E., Sommitsch, C., Zeiler, G. & Paul, S., 2015, 38. Vortragsveranstaltung Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. Düsseldorf: Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2012

Impacts on the mechanical properties of aluminum base material due to pin welding

Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding

Gao, Z., Wang, P., Cheng, D., Niu, J. & Sommitsch, C., 2015, In : Engineering Review. Vol. 35, Issue 3, p. 283-289

Research output: Contribution to journalArticleResearchpeer-review

File
2011

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2019

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2020

Numerical simulation of hybrid joining processes: self-piercing riveting combined with adhesive bonding

Potgorschek, L., Domitner, J., Hönsch, F., Sommitsch, C. & Kaufmann, S., 2020, In : Procedia Manufacturing. 47, p. 413-418

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2013

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 22 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

Numerical Simulation of the Microstructure Evolution in Friction Stir Spot Welding of AA6082 and Physical Model Validation by Means of Hot Torsion

Krumphals, F., Poletti, M. C., Gao, Z., Enzinger, N. & Sommitsch, C., 2 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

Microstructure and creep behaviour of similar martensitic 9% chromium steel electron beam welds

Sommitsch, C., Beal, C., Schlacher, C., Pelzmann, T. & Sabitzer, C., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

2011

Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In : The International journal of multiphysics. Spec. Edit, p. 209-217

Research output: Contribution to journalArticleResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2011, In : Advanced Materials Research. 278, p. 168-173

Research output: Contribution to journalArticleResearchpeer-review

2019

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2011

On the Theory of Microstructure Changes in Metals: Hardening, Recovery, Grain Boundary Motion, and Recrystallization

Mitter, W. & Sommitsch, C., 2011, 1 ed. Graz: Verlag der Technischen Universität Graz. (Advanced Materials Science)

Research output: Book/ReportBookResearch

2012

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER ASSISTED SIDE MILLING OF Ti6Al4V ALLOY

Zamani, H., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2012, The Materials Science & Technology 2012 Conference and Exhibition proceedings. Pittsburgh Pennsylvania: Materials Science and Technology (MS&T) 2012, p. 1526-1533

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of low-stress creep testing data and its implication on the life-time prediction for 9-12% Cr steels

Mayr, P., Schlacher, C., Mendez Martin, F., Radis, R. & Sommitsch, C., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., Vol. 12. p. C24-C25 (Creep and Fracture of Engineering Materials and Structures).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Preface

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T., 1 Jan 2017, In : Materials Science Forum. 879

Research output: Contribution to journalEditorialResearch

2011

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

Influence of deformation on phase transformation and precipitation

Kozeschnik, E., Timoshenkov, A., Piotr, W., Albu, M., Klarner, J., Gruber, G. & Sommitsch, C., 8 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Damage analysis of a cracked low-pressure steam turbine blade

Plesiutschnig, E., Vallant, R., Enzinger, N. & Sommitsch, C., 28 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2018

On the Damage Behavior of a 0.1C6Mn Medium-Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2018, In : Steel research international. 89, 9, 1700378.

Research output: Contribution to journalArticleResearchpeer-review

GUEST EDITORIAL

Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., 1 Oct 2018, In : Journal of Materials Engineering and Performance. 27, 10, p. 4981-4982 2 p.

Research output: Contribution to journalEditorialResearchpeer-review

2019

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2016, In : Materials Science Forum. 879, p. 1847-1852

Research output: Contribution to journalArticleResearchpeer-review

2013

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Sommitsch, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O. & Zurek, J., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

Cavitation studies in materials: New insights from modern techniques in 2D/3D/4D characterisation

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 1 Mar 2015, In : Materials Science and Technology (United Kingdom). 31, 5, p. 513-515 3 p.

Research output: Contribution to journalEditorialResearchpeer-review

2017

ULTRA-FINE WIRE FABRICATING APPARATUS AND METHOD

Pourbashiri, M., Sedighi, M., Sommitsch, C., Pourbashiri, M., Sedighi, M. & Sommitsch, C., 7 Sep 2017, IPC No. B21C 1/ 04 A I, Patent No. US2017252788, Priority date 2 Mar 2016, Priority No. IR20161394301390

Research output: PatentResearch

2020

Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures

Jabbari, A. H., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, In : International Journal of Fatigue. 139, 105803.

Research output: Contribution to journalArticleResearchpeer-review

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, In : Materials. 13, 14 p., 808.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2016

From ICDP to (graphitized) HSS: Sophisiticated work roll grades for highest demands in rolling mills for flat products

Armin, P., Brandner, M., Trickl, T., Elizondo, L., Beal, C. & Sommitsch, C., 2016, 10th International Rolling Conference and the 7th European Rolling Conference . Buchmayr, B. (ed.). ASMET, Austrian Society for Metallurgy and Materials

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Impact of Mg, Cu and Si distribution on the microhardness of Al dendrites after casting, homogenization and continuous cooling of G-AlSi7MgCu0.5

Krumphals, F., Mittermayr, F., Gumpl Philipp, N. V., Stauder, B., Sommitsch, C. & Radis, R., 4 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

Mathematical Modelling of Weld Phenomena 10

Sommitsch, C. (ed.) & Enzinger, N. (ed.), 2013, 1 ed. .

Research output: Book/ReportBookResearch

2012

Zelluläre Automaten als Werkzeug zur Abbildung komplexer Systeme – Rekristallisation

Timoshenkov, A., Sommitsch, C. & Klarner, J., 12 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2019

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

2016

In Situ Phase Investigations of X20Cr13 High Cr Steel

Mitsche, S., Plesiutschnig, E. & Sommitsch, C., 2016.

Research output: Contribution to conferencePosterResearch

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2018

Modeling of contact zones in air bending of sheet metals

Domitner, J., Eckhard, R., Schweinzer, D., Leumüller, H., Heller, B. & Sommitsch, C., 2018, In : Journal of Physics / Conference Series. 1063, p. 012141-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2011

Microstructure development in hot deformed AA6082

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 2011, In : Materials science and engineering / A. 528, p. 2423-2430

Research output: Contribution to journalArticleResearchpeer-review