Find Research Outputs

Search in all content

Filters for Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Christof Sommitsch
2012

Modeling of grain growth in one and two phase materials by 2D cellular automata

Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., 1 Sep 2012, In : Journal of Computational and Theoretical Nanoscience. 9, 9, p. 1515-1524 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2019

Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties

Skalon, M., Görtler, M., Meier, B., Arneitz, S., Urban, N., Mitsche, S., Huber, C., Franke, J. & Sommitsch, C., 29 Dec 2019, In : Materials. 13, 1, 14 p., 139.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2014

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2014

Friction welding and friction stir welding – an overview

Enzinger, N., Gao, Z., Hütter, A., Mucic, K., Pakkanen, J. A. & Sommitsch, C., 24 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Friction Stir Welding of dissimilar material combinations

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 6 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2014

Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

Lemmerer, D., Kicin, M., Spachinger, S., Wagner, J., Enzinger, N. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 298-299

Research output: Contribution to journalArticleResearchpeer-review

2011

Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In : Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In : The International journal of multiphysics. Spec. Edit, p. 209-217

Research output: Contribution to journalArticleResearchpeer-review

2014

Dissimilar Electron Beam Welding of Nickel Base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, In : Procedia engineering . 86, p. 184-194

Research output: Contribution to journalArticleResearchpeer-review

2020

Stability of a Melt Pool during 3D-Printingof an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, In : Materials. 13, 3, 14 p., 808.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2019

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2018

Characterization of localized corrosion of heat treated Er- and Zr-containing A356 alloys in 3.5 wt% NaCl aqueous solution

Colombo, M., Buzolin, R. H., Gariboldi, E., Vallant, R. & Sommitsch, C., 7 Jun 2018, In : Materials and corrosion. p. 1-13

Research output: Contribution to journalArticleResearchpeer-review

2015

Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : HTM - journal of heat treatment and materials. 70, 1, p. 19-25

Research output: Contribution to journalArticleResearch

2016

The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2016, In : Materials Science Forum. 879, p. 1847-1852

Research output: Contribution to journalArticleResearchpeer-review

2019

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

2012

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 2012, Internationaler Fachkongress der Schweiß- und Verbindungstechnik JOIN-EX. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Study of creep cavitation behavior in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques

Gupta, C., Toda, H., Schlacher, C., Adachi, Y., Mayr, P., Sommitsch, C., Usegi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Materials science and engineering / A. A564, p. 525-538

Research output: Contribution to journalArticleResearchpeer-review

2016

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 22, p. 127-132 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Application of thermo-calc TCFE7 to high-alloyed mottled cast iron

Paar, A., Elizondo, L., Brandner, M., Trickl, T., Sonderegger, B., Beal, C. & Sommitsch, C., 2016, In : Materials Science Forum. 879, p. 1431-1436 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2012

Influence of temperature and strain rate on dynamic softening processes in AllvacR 718PlusTM

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2012, In : Materials Science Forum. 706-709, p. 2440-2445

Research output: Contribution to journalArticleResearchpeer-review

2013

Physical and Numerical Simulations of the Microstructure Evolution in AA6082 During Friction Stir Processing by Means of Hot Torsion and FEM

Krumphals, F., Gao, Z., Zamani, H., Mitsche, S., Enzinger, N. & Sommitsch, C., 2013, In : Materials Science Forum. 762, p. 590-595

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Corrigendum to "Microstructure development in hot deformed AA6082" [Mater. Sci. Eng. A 528 (2011) 2423-2430]

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 1 Mar 2013, In : Materials science and engineering / A. 564, p. 288 1 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

Yadav, S. D., Sonderegger, B., Sartory, B., Sommitsch, C. & Poletti, M. C., 2015, In : Materials science and technology. 31, 5, p. 554-564

Research output: Contribution to journalArticleResearchpeer-review

2013

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Poletti, M. C., Wójcik, T. & Sommitsch, C., 2013, In : Metallurgical and materials transactions / A. 44, p. 1577-1586

Research output: Contribution to journalArticleResearchpeer-review

2014

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

2012

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012, MMM 2012 -6th International Conference on Multiscale Materials Modeling. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung der Kinetik von Korn- und Phasengrenzen im Zweiphasengebiet von Ti-6Al-4V zur Vorhersage der Kornvergröberung mittels zellularem Automaten

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 16 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

Mikrostrukturmodellierung von Ti-6Al-4V während der thermomechanischen Behandlung mittels zellularem Automaten

Krumphals, A. & Sommitsch, C., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

Damage analysis of extrusion tools made from the austenitic hot work tool steel Böhler W750

Krumphals, F., Wlanis, T., Sievert, R., Wieser, V. & Sommitsch, C., 2011, In : Computational materials science. 50, p. 1250-1255

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2014

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2019

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Influence of the E-coating process on the mechanical properties of aluminum welds

Silvayeh, Z., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2020

Numerical simulation of hybrid joining processes: self-piercing riveting combined with adhesive bonding

Potgorschek, L., Domitner, J., Hönsch, F., Sommitsch, C. & Kaufmann, S., 2020, In : Procedia Manufacturing. 47, p. 413-418

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2015

Hot deformation behavior of a 3rd generation advanced high strength steel with a Medium-Mn content

Steineder, K., Dikovits, M., Beal, C., Sommitsch, C., Krizan, D. & Schneider, R., 2015, In : Key Engineering Materials . 651-653, p. 120-125

Research output: Contribution to journalArticleResearchpeer-review

2013

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In : Key Engineering Materials . 554-557, p. 2054-2061

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2011

Modeling of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2020

Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures

Jabbari, A. H., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, In : International Journal of Fatigue. 139, 105803.

Research output: Contribution to journalArticleResearchpeer-review

2012

Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

Radis, R., Schlacher, C., Kozeschnik, E., Mayr, P., Enzinger, N., Schröttner, H. & Sommitsch, C., 2012, In : Metallurgical and materials transactions / A. 43, 4, p. 1132-1139

Research output: Contribution to journalArticleResearchpeer-review

2016

Processing and Material Properties of Hot Work Tool Steels Manufactured by Selective Laser Melting.

Giedenbacher, J., Huskic, A., Wallner, S. & Sommitsch, C., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial Perspective in Additive Technologies. Linz, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2017

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

2012

Zerstörende und zerstörungsfreie Prüfung der Kriechschädigung eines 9% Cr Stahles (Projekt "Hot Pipes")

Pein, C. & Sommitsch, C., 2012, Jahrestagung 2012 Zerstörungsfreie Materialprüfung, Kurzfassungen der Vorträge und Posterbeiträge. ., p. 48-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review