Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Christof Sommitsch
2011

Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2011, In : Advanced Materials Research. 278, p. 168-173

Research output: Contribution to journalArticleResearchpeer-review

2012

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER ASSISTED SIDE MILLING OF Ti6Al4V ALLOY

Zamani, H., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2012, The Materials Science & Technology 2012 Conference and Exhibition proceedings. Pittsburgh Pennsylvania: Materials Science and Technology (MS&T) 2012, p. 1526-1533

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Effect of Melting on the Hot Ductility of Continuously Cast Steels

Caliskanoglu, O., Zamberger, S., Beal, C. & Sommitsch, C., 2015, The 6th International Congress on the Science and Technology of Steelmaking (ICS2015). Peking: China Machine Press, p. 512-515

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

2017

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

2016

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 19 Dec 2016, In : IOP Conference Series / Materials Science and Engineering. 159, 2001, p. 1-8 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2013

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2019

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2014

STUDY OF CREEP DAMAGE IN CREEP EXPOSED MARTENSITIC HIGH CHROMIUM STEEL WELDMENTS

Schlacher, C., Beal, C., Sommitsch, C., Toda, H. & Mayr, P., 2014, International Conference on Advances in Materials Technology for Fossil Power Plants. ., p. 914-922

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application

Ramskogler, C., Warchomicka, F. G., Sommitsch, C., Mostofi, S. & Weinberg, A., 2015, Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Microstructural evolution in 0.1%C5%Mn steel after intercritical annealing depending on temperature and cooling rate

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of the European Conference on Heat Treatment and 21st IFHTSE Congress. ., p. 301-308

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Modeling of grain growth in one and two phase materials by 2D cellular automata

Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., 1 Sep 2012, In : Journal of Computational and Theoretical Nanoscience. 9, 9, p. 1515-1524 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Evolution of beta grain size during beta phase processing of Ti-6A1-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 493-496 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Surface Modification of pure magnesium and magnesium alloy AZ91 by Friction Stir Processing

Hütter, A., Huemer, W., Ramskogler, C., Warchomicka, F. G., Lachehab, A., Vallant, R. & Sommitsch, C., 15 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 2012, (Accepted/In press) Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse. Tscheljabinsk: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Surface Modification of pure magnesium and magnesium alloy by Friction Stir Processing

Hütter, A., Huemer, W., Ramskogler, C., Warchomicka, F. G., Lachehab, A., Vallant, R. & Sommitsch, C., 2015, In : Key Engineering Materials . 651-653, p. 796-801

Research output: Contribution to journalArticleResearchpeer-review

2013

Study of Creep damage in a 10.86% Cr Heat Resistant Steel using Synchrotron X-ray Microtomography

Gupta, C., Toda, H., Schlacher, C., Mayr, P., Sommitsch, C., Uesugi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Advanced Materials Research. 794, p. 476-483

Research output: Contribution to journalArticleResearchpeer-review

2012

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 593-598

Research output: Contribution to journalArticleResearchpeer-review

2015

Effect of Pass Number, Rotational and Traverse Speed on Particle Distribution and Microstructure of AZ31/SiC Composite Produced by Friction Stir Processing

Jabbari, A. H., Sedighi, M., Vallant, R., Hütter, A. & Sommitsch, C., 2015, In : Key Engineering Materials . 651-653, p. 765-770

Research output: Contribution to journalArticleResearchpeer-review

2014

Failure modes for total ankle arthroplasty: a statistical analysis of the Norwegian Arthroplasty Register

Sadoghi, P., Roush, G., Kastner, N., Leithner, A., Sommitsch, C. & Goswami, T., 2014, In : Archives of Orthopaedic and Trauma Surgery. 134, p. 1361-1368

Research output: Contribution to journalArticleResearchpeer-review

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014, ASMET Forum für Metallurgie und Werkstofftechnik 2014. Leoben: ., p. 108-114

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

CORROSION RESISTANCE OF LINEAR FRICTION WELDED CHAIN LINKS

Gsellmann, B., Huemer, W., Vallant, R. & Sommitsch, C., 2015.

Research output: Contribution to conferencePaperResearch

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

Plesiutschnig, E., Vallant, R., Stöfan, G., Sommitsch, C., Mayr, M., Marn, A. & Heitmeir, F., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 214-225

Research output: Contribution to journalArticleResearchpeer-review

2012

Prediction of Hot Tearing in Permanent Mold Steel Casting Using a viscoplastic Model with Damage

Hadzic, S. & Sommitsch, C., 2012, Materials Science & Technology Conference and Exhibition. Pittsburgh Pennsylvania: ., p. 86-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Microstructural evolution of two low carbon steels with a medium manganese content

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of 2nd HMnS Conference. ., p. 351-354

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Microstructure and creep behaviour of similar martensitic 9% chromium steel electron beam welds

Sommitsch, C., Beal, C., Schlacher, C., Pelzmann, T. & Sabitzer, C., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

2017

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Hot deformation behavior of a 3rd generation advanced high strength steel with a Medium-Mn content

Steineder, K., Dikovits, M., Beal, C., Sommitsch, C., Krizan, D. & Schneider, R., 2015, In : Key Engineering Materials . 651-653, p. 120-125

Research output: Contribution to journalArticleResearchpeer-review

2016

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review

2017

ULTRA-FINE WIRE FABRICATING APPARATUS AND METHOD

Pourbashiri, M., Sedighi, M., Sommitsch, C., Pourbashiri, M., Sedighi, M. & Sommitsch, C., 7 Sep 2017, IPC No. B21C 1/ 04 A I, Patent No. US2017252788, Priority date 2 Mar 2016, Priority No. IR20161394301390

Research output: PatentResearch

2018

Untersuchung der mechanischen Materialeigenschaften in der Wärmeeinflusszone geschweißter EN AW-6063-Bleche

Silvayeh, Z., Götzinger, B., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Tagungsband der 10. Ranshofener Leichtmetalltage: Hochleistungsmetalle und Prozesse für den Leichtbau der Zukunft. Kraly, A., Chimani, C. & Uggowitzer, P. (eds.). p. 198-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of the intermetallic layer thickness in cold metal transfer welding of aluminum to steel

Silvayeh, Z., Götzinger, B., Karner, W., Hartmann, M. & Sommitsch, C., 22 Dec 2018, In : Materials. 12, 1, 35.

Research output: Contribution to journalArticleResearchpeer-review

Influence of the E-coating process on the mechanical properties of aluminum welds

Silvayeh, Z., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2019

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Numerical study on destructive testing of self-piercing rivet joints

Domitner, J., Woltsche, C., Hönsch, F. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2013

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In : Key Engineering Materials . 554-557, p. 2054-2061

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2017

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2019

Multi scale topography in titanium alloys by electron beam technique: influence on the tissue adhesion and bacterial contamination

Warchomicka, F. G., Ramskogler, C., Ferraris, S., Cochis, A., Rimondini, L., Weinberg, A., Spriano, S. & Sommitsch, C., 8 May 2019, p. 1. 1 p.

Research output: Contribution to conferencePosterResearch

2014

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Timoshenkov, A., Warczok, P., Albu, M., Jürgen, K., Ernst, K., Gruber, G. & Sommitsch, C., 2014, In : Steel research international. 85, 6, p. 954-967

Research output: Contribution to journalArticleResearchpeer-review

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

2019

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2018

Numerical simulation and experimental validation of self-piercing riveting (SPR) of 6xxx aluminium alloys for automotive applications

Hönsch, F., Domitner, J., Sommitsch, C., Götzinger, B. & Kölz, M., 2018, In : Journal of Physics / Conference Series. 1063, p. 012081-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
2014

Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 2014, In : International journal for multiscale computational engineering. 12, 1, p. 23-31

Research output: Contribution to journalArticleResearchpeer-review

2013

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Poletti, M. C., Wójcik, T. & Sommitsch, C., 2013, In : Metallurgical and materials transactions / A. 44, p. 1577-1586

Research output: Contribution to journalArticleResearchpeer-review

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, In : Materials Science Forum. 753, p. 353-356

Research output: Contribution to journalArticleResearchpeer-review

2015

Preface

Ofenheimer, A., Poletti, C., Schalk-Kitting, D. & Sommitsch, C., 2015, In : Key Engineering Materials . 651-653

Research output: Contribution to journalEditorialResearchpeer-review