Find Research Outputs

Search concepts
Selected filters
2011

Adaption of DGNB-Methodology to Austria - Lessons Learned from the first Certificates

Passer, A., Kreiner, H. & Smutny, R., 2011, Adaption of DGNB-Methodology to Austria - Lessons Learned from the first Certificates. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Applicability of environmental impact assessment indicators on the use of natural resources in the built environment.

Wallbaum, H., Passer, A., Bringezu, S. & Kono, J., 2015, World Resources Forum 2015. ., p. 1-20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

WASTE HEAT RECOVERY FOR COMMERCIAL VEHICLES: BASICS AND THE MAIN CHALLENGES

Lang, M. & Kirchberger, R., 31 May 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2019

SELECTION PROCEDURE OF HYDRAULIC VALVES FOR TRIBOLOGICAL RESEARCH

Lovrec, D. & Edler, J., 2019, Proceedings on Engineering Science : 16th International Conference on Tribology. University of Kragujevac, Vol. 1,1. p. 646-651

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2018

Apple skin of old apple varieties as terpene factory

Tauber, I., Innerhofer, G., Leitner, E. & Siegmund, B., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2017

Immunogold labelling of allergens at fine dust filter particles for SEM investigations

Nachtnebel, M., Achtsnit, T., Mertl, J., Ettenberger, G. & Rattenberger, J., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 168-169

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

Ermittlung von Sicherheitsfaktoren mit der FE-Methode durch Reduktion der Scherfestigkeitsparameter – Neue Erkenntnisse

Schweiger, H. & Tschuchnigg, F., 2015, BAW Mitteilungen Nr. 98 - Numerische Methoden in der Geotechnik. Karlsruhe: Bundesanstalt für Wasserbau, p. 7-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Examples for successful 3D finite element analysis in geotechnical engineering

Schweiger, H. & Tschuchnigg, F., 2013, Int.Conf. Geotec Hanoi 2013. Hanoi: Construction Publishing House, p. 703-712

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Hydro power plant Obervermuntwerk II - shotcrete phenomena in the power house cavern - decisions and remediation

Dich, C., Tschuchnigg, F. & Schweiger, H., Aug 2016, Eurock 2016 : Rock Mechanics and Rock Engineering: from the Past to the Future. 1 ed. Vol. 1. p. 553 560 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D Finite Element analysis of a complex hydropower project

Tschuchnigg, F., Schweiger, H. & Dich, C., May 2016, 13th International Conference entitled “Underground Construction Prague 2016”. p. 1 9 p. S5-OP3

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Student Project - Embankment and Footing Prediction

Tschuchnigg, F., Sep 2016, EMBANKMENT PREDICTION SYMPOSIUM. 1 ed. Vol. 1. p. 350-365 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

Comparison of different strength reduction techniques on slope stability calculations

Schneider-Muntau, B., Tschuchnigg, F., Medicus, G. & Fellin, W., May 2018, p. 102. 103 p.

Research output: Contribution to conferencePaperResearchpeer-review

2016

Measuring SIS100 magnets using advanced multipole descriptions

Schnizer, P., Mierau, A., Kaether, F., Weiss, H. G., Schnizer, B. & Fischer, E., 17 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Simulationsbasierte Potentialbewertung von Konzepten zur Senkung des Heiz- und Kühlenergiebedarfs in Schienenfahrzeugen

Luger, C., Kallinovsky, J. & Rieberer, R., 2016, Proc. Deutsche Kälte-Klima-Tagung 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Unified Timber Connections - Kurzbericht: Standardisierung von Verbindungssystemen im Holzbau

Koppelhuber, J. & Huter, P., 27 Sep 2016, . 26 p.

Research output: Book/ReportCommissioned reportResearch

STUDIE ZU GESCHÄFTSMODELLEN FÜR INNOVATIVE MODULBAUTEN AUS HOLZ: ARBEITSPAKET 1 von 3 Grundlagenrecherche/Kriterienkatalog

Koppelhuber, J., Bok, M., Heck, D. & Wall, J., 29 Sep 2016, (Submitted) . 213 p.

Research output: Book/ReportCommissioned reportResearchpeer-review

Fabrication of Cellulose Structures via Focused Electron Beam Induced Conversion: Approaching the Nanoscale

Ganner, T., Sattelkow, J., Rumpf, B., Eibinger, M., Reishofer, D., Winkler, R., Nidetzky, B., Spirk, S. & Plank, H., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Direct-Write Fabrication of Electric and Thermal High-Resolution Nanoprobes on Self-Sensing AFM Cantilever

Sattelkow, J., Plank, H., Xu, Z., Schwalb, C. H. & Fantner, G., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2017

New insights to the formation of modern dolomite in a terrestrial low-temperature environment

Zünterl, A., Baldermann, A., Boch, R. & Dietzel, M., 2017.

Research output: Contribution to conferenceAbstractResearchpeer-review

2016

Scale-up of HME Process from a Trilobed 16mm to a Bilobed 27mm Extruder; SPH Simulations and 1D Mechanistic Modelling

Matic, J., Laske, S., Paudel, A., Pfefferlé, F., Martinetti, J. L., Martel, S. & Khinast, J., 16 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

2018

Embankment prediction and back analysis by means of 2D and 3D finite element analyses

Tschuchnigg, F. & Schweiger, H., 2018, In : Computers and Geotechnics. 93, p. 104-114 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of failure criterion on slope stability analysis

Tschuchnigg, F., Schweiger, H. & Sallinger, M., Jun 2018, p. 1055. 1062 p.

Research output: Contribution to conferencePaperResearchpeer-review

2007

APPLICATION OF THE GROUND ANCHOR FACILITY IN PLAXIS 3D FOUNDATION

Tschuchnigg, F. & Schweiger, H., Mar 2007, Plaxis Bulletin, 21, p. 19-21 3 p.

Research output: Contribution to specialist publicationArticleResearch

2016

FEBID Based 3D Nano-Printing of Plasmonic Gold Structures: Beyond Current Limitations

Winkler, R., Schmidt, F., Haselmann, U., Lewis, B. B., Fowlkes, J. D., Rack, P., Kothleitner, G., Hofer, F. & Plank, H., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Requirements on Technologies for Future Mobility

Brunner, H. & Hirz, M., 13 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2018

Finite element analyses of slope stability problems using non-associated plasticity

Oberhollenzer, S., Tschuchnigg, F. & Schweiger, H., 2018, In : Journal of Rock Mechanics and Geotechnical Engineering . 10, p. 1091-1101 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2016

STUDIE ZU GESCHÄFTSMODELLEN FÜR INNOVATIVE MODULBAUTEN AUS HOLZ: ARBEITSPAKET 3 von 3 Geschäftsmodell-Prototyp und Handlungsempfehlungen

Koppelhuber, J., Bok, M., Heck, D. & Wall, J., 29 Sep 2016, . 58 p.

Research output: Book/ReportCommissioned reportResearchpeer-review

Industrialized Timber Building Systems For An Increased Market Share – A Holistic Approach Targeting Construction Management And Building Economics

Koppelhuber, J., Bauer, B. & Heck, D., 5 Sep 2016, proceedings 1877-7058 © 2017 The Authors. Published by Elsevier Ltd. Peer-review under responsibility of the organizing committee of SCESCM 2016. Sustainable Civil Engineering Structures and Construction Materials, SCESCM 2016. (procedia engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

STUDIE HOLZ-BETON-VERBUNDDECKEN XC®-FERTIGTEILE IM MEHRGESCHOSSIGEN WOHNBAU

Koppelhuber, J., 28 Apr 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2012

Optimized reaction conditions for the cross-metathesis of methyl oleate and oleylamine with ethyl acrylate

Abbas, M. & Slugovc, C., 2012, In : Monatshefte für Chemie = Chemical monthly. 143, p. 669-673

Research output: Contribution to journalArticleResearchpeer-review

2014

STDP Installs in Winner-Take-All Circuits an Online Approximation to Hidden Markov Model Learning

Kappel, D., Nessler, B. & Maass, W., 2014, In : PLoS computational biology. 10, e1003511;3, p. 1-22

Research output: Contribution to journalArticleResearchpeer-review

2017

Local stresses in webs of crane runway girders: Tests and numerical calculations

Kettler, M., Kampleitner, A., Novak, F., Mandl, A. & Unterweger, H., Dec 2017, In : Journal of Constructional Steel Research. 139, p. 188-201

Research output: Contribution to journalArticleResearchpeer-review

Practical Strongly Invisible and Strongly Accountable Sanitizable Signatures

Beck, M. T., Camenisch, J., Derler, D., Krenn, S., Pöhls, H. C., Samelin, K. & Slamanig, D., 2017, Information Security and Privacy - 22nd Australasian Conference, ACISP 2017, Auckland, New Zealand, July 3-5, 2017, Proceedings, Part I.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Morphology of polysaccharide blend fibers shaped from NaOH, N-methylmorpholine-N-oxide and 1-ethyl-3-methylimidazolium acetate

Wendler, F., Persin, Z., Stana-Kleinschek, K., Reischl, M., Ribitsch, V., Bohn, A., Fink, H. P. & Meister, F., 1 Oct 2011, In : Cellulose. 18, 5, p. 1165-1178 14 p.

Research output: Contribution to journalArticleResearchpeer-review

2010

Differences Between Cotton and Viscose Fibers Crosslinked with BTCA

Šauperl, O. & Stana Kleinschek, K., 1 Jan 2010, In : Textile research journal. 80, 4, p. 383-392 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2009

Electrokinetic properties of polypropylene-layered silicate Nanocomposite fibers

Smole, M. S., Stakne, K., Stana Kleinschek, K., Kurecic, M., Bele, M., Gregor-Svetec, D. & Ribitsch, V., 15 Jul 2009, In : Journal of applied polymer science. 113, 2, p. 1276-1281 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Statističko planiranje obrade viskoze sa sredstvima s niskim sadržajem formaldehida

Šauperl, O., Pušic, T., Strnad, S. & Stana Kleinschek, K., 1 Jun 2009, In : Tekstil. 58, 6, p. 254-270 17 p.

Research output: Contribution to journalArticleResearchpeer-review

2010

Improvement of the hemocompatibility of PET surfaces using different sulphated polysaccharides as coating materials

Fasl, H., Stana, J., Stropnik, D., Strnad, S., Stana Kleinschek, K. & Ribitsch, V., 8 Feb 2010, In : Biomacromolecules. 11, 2, p. 377-381 5 p.

Research output: Contribution to journalArticleResearchpeer-review

2008

Oscillating streaming potential measurement system for macroscopic surfaces

Reischl, M., Köstler, S., Kellner, G., Stana Kleinschek, K. & Ribitsch, V., 8 Dec 2008, In : Review of scientific instruments. 79, 11, 113902.

Research output: Contribution to journalArticleResearchpeer-review

2001

Disociacijsko - adsorpcijske značilnosti PA 6 vlaken z uporabo titracijskih metod

Fras Zemljič, L., Stana Kleinschek, K., Strnad, S. & Ribitsch, V., 1 Dec 2001, Tekstilec, 44, 11-12, p. 334-337 4 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

2005

Determination of the accessible carboxyl and amino end groups in structurally modified PA 6 using titration methods

Stana Kleinschek, K., Fras Zemljič, L., Strnad, S. & Ribitsch, V., 1 Jan 2005, In : Materials Research Innovations. 9, 1, p. 8-9 2 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

Surface-Sensitive Approach to Interpreting Supramolecular Rearrangements in Cellulose by Synchrotron Grazing Incidence Small-Angle X‑ray Scattering

Ehmann, H., Werzer, O., Pachmajer, S., Mohan, T., Amenitsch, H., Resel, R., Kornherr, A., Stana-Kleinschek, K., Kontturi, E. & Spirk, S., 2015, In : ACS Macro Letters . 4, p. 713-717

Research output: Contribution to journalArticleResearchpeer-review

Gold nanoparticles in the engineering of antimicrobial and anticoagulant surfaces

Ehmann, H., Breitwieser, D., Winter, S., Gspan, C., Koraimann, G., Maver, U., Sega, M., Köstler, S., Stana-Kleinschek, K., Ribitsch, V. & Spirk, S., 2015, In : Carbohydrate Polymers. 117, p. 34-42

Research output: Contribution to journalArticleResearchpeer-review

2007

Nanofilled polypropylene fibres

Smole, M. S. & Stana Kleinschek, K., 1 Jan 2007, Nanofibers and Nanotechnology in Textiles. Elsevier B.V., p. 281-298 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

2006

Characterization of cotton fibres modified by carboxylethyl cellulose

Fras Zemljič, L., Stenius, P., Laine, J., Stana Kleinschek, K. & Ribitsch, V., 2006, In : Lenzinger Berichte. 85, p. 68-76

Research output: Contribution to journalArticleResearchpeer-review

1996

Utjecaj organskih stabilizatora na kinetiku raspada vodikovog peroksida i efekte bijeljenja pamučne tkanine

Stana Kleinschek, K. & Golčer, M., 1 Jul 1996, In : Tekstil. 45, 7, p. 355-360 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2001

Surface characterisation of NH3 plasma treated polyamide 6 foils

Tušek, L., Nitschke, M., Werner, C., Stana Kleinschek, K. & Ribitsch, V., 30 Dec 2001, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 195, 1-3, p. 81-95 15 p.

Research output: Contribution to journalArticleResearchpeer-review