Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2018
  • 2016

Author

  • Norbert Enzinger
2020

Microstructure investigation of duplex stainless steel welds using arc heat treatment technique

Putz, A., Hosseini, V. A., Westin, E. M. & Enzinger, N., 8 May 2020, In : Welding in the World. 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

Orłowska, M., Brynk, T., Hütter, A., Goliński, J., Enzinger, N., Olejnik, L. & Lewandowska, M., 10 Mar 2020, In : Materials Science and Engineering A. 777, 15 p., 139076.

Research output: Contribution to journalArticleResearchpeer-review

2018

Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels

Pouriamanesh, R., Dehghani, K., Vallant, R. & Enzinger, N., Nov 2018, In : Journal of Materials Engineering and Performance. 27, 11, p. 6058-6068 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding of Copper using Plasma Spraying for filler metal deposition

Stummer, M., Stütz, M., Aumayr, A. & Enzinger, N., 1 Nov 2018, In : Welding in the World. 62, 6, p. 1341-1350 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding of wear-resistant steels

Schneider, C., Ernst, W., Vallant, R. & Enzinger, N., 12 Jul 2018.

Research output: Contribution to conferencePosterResearch

Festigkeitsprüfung bei nicht ruhender Beanspruchung

Enzinger, N., 2018, Praxishandbuch Werkstoffprüfung: Methoden der zerstörenden und zerstörungsfreien Werkstoffprüfung. TÜV Austria Fachverlag, p. 75-80

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Hydrogen-induced plasticity in nanoporous palladium

Gößler, M., Steyskal, E-M., Stütz, M., Enzinger, N. & Würschum, R., 2018, In : Beilstein Journal of Nanotechnology . 9, p. 3013 3024 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of static strength on the fatigue resistance of welds

Steimbreger, C., Gubeljak, N., Enzinger, N., Ernst, W. & Chapetti, M., 25 May 2018, In : MATEC Web of Conferences. 165, 7 p., 13010.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Residual stresses in 18CrNiMo7-6 linear friction welded high strength steel chains

Garcia Nunes, D., Effertz, P., Quintino, L., Pires, I., Fuchs, F. & Enzinger, N., Jun 2018, In : The international journal of advanced manufacturing technology. 96, 9-12, p. 3703-3710 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Rotary friction welding of molybdenum components

Stütz, M., Pixner, F., Wagner, J., Reheis, N., Raiser, E., Kestler, H. & Enzinger, N., 7 Feb 2018, In : International Journal of Refractory Metals & Hard Materials. 73, p. 79-84 6 p., RMHM_4664.

Research output: Contribution to journalArticleResearchpeer-review

Surface treatment for effective bonding in the sports industry

Rabl, A., Stummer, M., Pfund, M., Pongau, A. I. & Enzinger, N., 1 Feb 2018, In : Materials Testing. 60, 2, p. 128-133 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-mechanical testing of TiO2 functional coatings using friction stir processing

Stummer, M., Enzinger, N. & Weiß, C., 2018, In : Materials Testing. 6, 9, p. 818-824

Research output: Contribution to journalArticleResearchpeer-review

Welding of S960MC with undermatching filler material

Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., Apr 2018, In : Welding in the World. 62, 4, p. 801-809 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Wire-based additive manufacturing using an electron beam as heat source

Fuchs, J., Schneider, C. & Enzinger, N., Mar 2018, In : Welding in the World. 62, 2, p. 267-275 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Haas, F., Enzinger, N. & Pfanner, S., 25 Nov 2016, Industrial perspectives in Additive Technologies. p. 157-162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Characterization of Electron Beam Welded Copper Using Plasma Spraying for Filler Metal Application

Stütz, M., Aumayr, A., Stummer, M., Voglreiter, C. M. & Enzinger, N., 30 Sep 2016.

Research output: Contribution to conferencePosterResearch

Considerations for Sound Parameter Studies in Electron Beam Welding of Thick Walled Components

Wiednig, C. A., Enzinger, N. & Beal, C., 11 Feb 2016, Cracking Phenomena in Welds IV. 1 ed. Berlin: Springer International Publishing AG , Vol. IV. p. 87-99 12 p. 10.1007/978-3-319-28434-7_5. (Cracking Phenomena in Welds).

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Development of the strongest welding consumables

Schnitzer, R., Haslberger, P., Schwarz, D., Ernst, W. & Enzinger, N., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar electron beam welds of nickel base alloy A625 with a 9% Cr-steel for high temperature applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 1 May 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

EBW of thick walled copper components using plasma spraying for filler metal application

Stummer, M., Stütz, M. & Enzinger, N., 4 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of RTE treatment on toughness of HSS weld metal

Cerjak, H-H., Enzinger, N., Caliskanoglu, O., Figner, G., Pudar, M., Mendez Martin, F. & Domankova, M., 10 Oct 2016, Proceedings 10th International Conference on Trends in Welding Research. Tokyo, p. 213-216 S11-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron Beam Welding of the softmartensitic steel 1.4317 (CA6NM)

Ghanimi, Y. & Enzinger, N., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron Beam Welding of TZM Sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 2 Jun 2016.

Research output: Contribution to conferencePosterResearch

Electron Beam Welding of TZM Sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 30 May 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Elektronenstrahlschweißen einer artfremden Verbindung (A625/CB2) für Anwendungen im Kraftwerksbau

Wiednig, C. A., Enzinger, N. & Beal, C., 2016, In : Schweiss- & Prüftechnik. 01-02/2016, p. 8-13

Research output: Contribution to journalArticleResearch

Open Access
File

Embrittlement of highstrength weld metal due to residual stress heat treatment

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 11 Jul 2016, (Accepted/In press). 6 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of weldability of titanium alloy Ti-6Al-4V and aluminum alloy 6061 dissimilar welds produced by electron beam welding

Havlic, P., Kouril, J., Foret, R., Enzinger, N. & Wiednig, C. A., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding

Havlik, P., Kouril, J., Foret, R., Dlouhy, I., Enzinger, N. & Wiednig, C. A., 2 Nov 2016, In : Materials Science Forum. 879, p. 714-719

Research output: Contribution to journalArticleResearchpeer-review

Experimental and numerical investigations on the punching failure of carbon fiber-reinforced plastics

Szlosarek, R., Karall, T., Enzinger, N., Hahne, C., Meyer, N. & Berger, A., Jul 2016, In : MP Materials Testing. 58, 7-8, p. 617-621 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Fracture angle search with Puck's 3D interfiber fracture criterion

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2016, In : Composites: Mechanics, Computations, Applications. 7, 4, p. 319-339

Research output: Contribution to journalArticleResearchpeer-review

Fracture angle search with Puck's 3D interfiber fracture criterion using the damped Newton's method

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2016, In : Composites: Mechanics, Computations, Applications. 7, 4, p. 319-339 21 p.

Research output: Contribution to journalArticleResearchpeer-review

Improving the Wetting Behaviour of Steel Substrates by Use of Atmospheric Pressure Plasma

Stummer, M., Stögmüller, P. & Enzinger, N., 12 Nov 2016, p. 482. 490 p.

Research output: Contribution to conferencePaperResearchpeer-review

Increasing of toughness of brittle type S690 HSS weld metal by application of reversible temper embrittlement (RTE)

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 25 Nov 2016, In : Welding in the World. p. 1-5

Research output: Contribution to journalArticleResearchpeer-review

Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains

Rath, G., Fuchs, F. & Enzinger, N., 2 Nov 2016, In : Materials Science Forum. 879, p. 508-513

Research output: Contribution to journalArticleResearchpeer-review

Influence of different welding processes on the mechanical properties of structural steel S960

Schneider, C., Enzinger, N., Vallant, R., Ernst, W., Staufer, H. & Schnitzer, R., 1 Jun 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

Spachinger, S. J., Ernst, W. & Enzinger, N., 11 Jul 2016, (Accepted/In press) p. 1117-1131.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

In-situ Characterization of Hydrogen Absorption in Nanoporous Palladium by Dilatometry and Resistometry

Steyskal, E-M., Wiednig, C. A., Enzinger, N. & Würschum, R., 2016.

Research output: Contribution to conferencePosterResearch

In situ characterization of hydrogen absorption in nanoporous palladium produced by dealloying

Steyskal, E-M., Wiednig, C. A., Enzinger, N. & Würschum, R., 2016, In : Beilstein Journal of Nanotechnology . 7, p. 1197-1201

Research output: Contribution to journalArticleResearchpeer-review

Mathematical Modelling of Weld Phenomena 11

Sommitsch, C., Enzinger, N. & Mayr, P., Dec 2016, 1. ed. Graz: Verlag der Technischen Universität Graz. 897 p.

Research output: Book/ReportBookResearchpeer-review

Numerical simulation of Pearlite formation during welding of rails

Weingrill, L. A., Nasiri, M. B. & Enzinger, N., 13 Oct 2016, p. 599. 602 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File

Numerische Simulation der Phasenumwandlungen bei Schienenschweißungen von perlitischem Stahl

Weingrill, L. A. & Enzinger, N., 9 Nov 2016, Schweißen und Wärmebehandlung: Simulationsforum 2016 Tagungsband. Hildebrand, D-I. J., Loose, D-I. T. & Reich, D-I. M. (eds.). Weimar: Verein zur Förderung der numerischen Analyse der Wärmebehandlungs- und Schweißprozesse e.V., p. 157 - 165 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Numerische Simulation der Phasenumwandlungen bei Schienenschweißungen von perlitischem Stahl

Weingrill, L. A. & Enzinger, N., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Open Access
File

Optimierung der Scherfestigkeit beim Widerstandsschweißen von Hartmetallzähnen an Stahltragkörpern

Hoflehner, C., 17 Feb 2016, Graz. 109 p.

Research output: ThesisMaster's ThesisResearch

Open Access
File