Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2017
  • 2016

Author

  • Christof Sommitsch
2020

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, In : Materials. 13, 14 p., 808.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2019

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CP-FE modelling and experimental investigation of gradient structured Al wires

Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, (Submitted) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

HOT DUCTILITY BEHAVIOR OF A CONTINUOUSLY CAST Ti-Nb MICROALLOYED STEEL

Hoflehner, C., Beal, C., Sommitsch, C., Six, J. & Ilie, S., 15 Nov 2019, METAL 2019: 28th International Conference on Metallurgy and Materials ; proceedings. Ostrava: TANGER Ltd., Ostrava, p. 84 - 89 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties

Skalon, M., Görtler, M., Meier, B., Arneitz, S., Urban, N., Mitsche, S., Huber, C., Franke, J. & Sommitsch, C., 29 Dec 2019, In : Materials. 13, 1, 14 p., 139.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Investigation of the fibre type influence on the energy desnity of the induction heating process through a semi-analytic method

Forstner, T., Sommitsch, C. & Fischer, F., 2019, Procedia Manufacturing 37 : Science Direct, Elsevier. p. 286-293 37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of the Oxidation Mechanism of Dopamine Functionalization in an AZ31 Magnesium Alloy for Biomedical Applications

Ghanbari, A., Warchomicka, F. G., Sommitsch, C. & Zamanian, A., 16 Sep 2019, In : Coatings. 9, 9, p. 1-13 13 p., 584.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Mathematical Modelling of Weld Phenomena 12

Sommitsch, C., Enzinger, N. & Mayr, P., 2019, Graz: Verlag der Technischen Universität Graz. 1074 p.

Research output: Book/ReportBookResearchpeer-review

Open Access

Microstructurally Based Modelling of Creep Deformation of Martensitic Steels

Sonderegger, B., Krenmayr, B., Riedlsperger, F. K., Fercher, B., Niederl, B. & Sommitsch, C., Oct 2019, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials 2019: Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials. ASM International, p. 360-369 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, (Submitted) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi scale topography in titanium alloys by electron beam technique: influence on the tissue adhesion and bacterial contamination

Warchomicka, F. G., Ramskogler, C., Ferraris, S., Cochis, A., Rimondini, L., Weinberg, A., Spriano, S. & Sommitsch, C., 8 May 2019, p. 1. 1 p.

Research output: Contribution to conferencePosterResearch

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

Strengthening mechanisms of Al wires processed by equal channel angular torsion drawing

Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 12 Nov 2019, In : Materials science and technology. 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Thermomechanical Wear Testing of Metal Matrix Composite Cladding for Potential Application in Hot Rolling Mills

Domitner, J., Aigner, M., Stern, T., Paar, A., Sommitsch, C. & Elizondo, L., 20 Nov 2019, In : Steel research international. 10 p., 1900478.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2017

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2017, In : International journal of materials research = Zeitschrift für Metallkunde. 108, 9, p. 741-749 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von Aluminiumblechen

Hönsch, F., 2017, 124 p.

Research output: ThesisMaster's ThesisResearch

File

Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique

Ayatollahi, M. R., Razavi, S. M. J., Sommitsch, C. & Moser, C., 2017, Materials Science Forum. Switzerland: Trans Tech Publications Ltd., Vol. 879. p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence and evaluation of the lubrication on the cold formability of a second-generation TWIP steel

Boskovic, V., Sommitsch, C. & Preininger, M., Jun 2017.

Research output: Contribution to conferencePaperResearch

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

Pitting corrosion behaviour of stainless steel AISI 304 with different tinting colours

Godavarthy Anantha Venkata, R. K. P., Gsellmann, B., Vallant, R. & Sommitsch, C., 25 May 2017, ESSC & DUPLEX 2017: 9th European Stainless Steel Conference - Science & Market / 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, p. 1-9 9 p. 026

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Preface

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T., 1 Jan 2017, In : Materials Science Forum. 879

Research output: Contribution to journalEditorialResearch

Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition

Vollmer, R. & Sommitsch, C., 16 Oct 2017, AIP Conference Proceeedings 1896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

ULTRA-FINE WIRE FABRICATING APPARATUS AND METHOD

Pourbashiri, M., Sedighi, M., Sommitsch, C., Pourbashiri, M., Sedighi, M. & Sommitsch, C., 7 Sep 2017, IPC No. B21C 1/ 04 A I, Patent No. US2017252788, Priority date 2 Mar 2016, Priority No. IR20161394301390

Research output: PatentResearch

2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review