Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Author

  • Norbert Enzinger
(Old data) Lecture or Presentation

Development of the strongest welding consumables

Schnitzer, R., Haslberger, P., Schwarz, D., Ernst, W. & Enzinger, N., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBW of thick walled copper components using plasma spraying for filler metal application

Stummer, M., Stütz, M. & Enzinger, N., 4 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of the softmartensitic steel 1.4317 (CA6NM)

Ghanimi, Y. & Enzinger, N., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of TZM Sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 30 May 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Embrittlement of highstrength weld metal due to residual stress heat treatment

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 11 Jul 2016, (Accepted/In press). 6 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of weldability of titanium alloy Ti-6Al-4V and aluminum alloy 6061 dissimilar welds produced by electron beam welding

Havlic, P., Kouril, J., Foret, R., Enzinger, N. & Wiednig, C. A., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

Spachinger, S. J., Ernst, W. & Enzinger, N., 11 Jul 2016, (Accepted/In press) p. 1117-1131.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Numerische Simulation der Phasenumwandlungen bei Schienenschweißungen von perlitischem Stahl

Weingrill, L. A. & Enzinger, N., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Open Access
File

Rotary Friction Welding of Large Molybdenum Tubes

Stütz, M., Wagner, J., Reheis, N., Kestler, H., Raiser, E. & Enzinger, N., 11 Oct 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Temperature field evolution during flash-butt welding of railway rails

Weingrill, L. A., Krutzler, J. & Enzinger, N., 2 Jun 2016. 26 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Validated thermo-metallurgically coupled numerical simulation of narrow gap multi-layer GMAW of high strength pearlitic rails

Weingrill, L. A., Nasiri, M. B. & Enzinger, N., 28 Jun 2017.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Weldability of S960MC: A comparison of different welding processes

Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., 11 Jul 2016. 16 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Article

3D Modelling of Flash Formation in Linear Friction Welded 30CrNiMo8 Steel Chain

Effertz, P., Fuchs, F. & Enzinger, N., 21 Oct 2017, In : Metals. 7, 10, 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

An analytical solution for temperature distribution in fillet arc welding based on an adaptive function

Nasiri, M. B. & Enzinger, N., 8 Mar 2019, In : Welding in the world. 63, 2, p. 409-419 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Basic alloy development of low-transformationtemperature fillers for AISI 410 martensitic stainless steel

Hosseini, S. A., Gheisari, K., Moshayedi, H., Warchomicka, F. G. & Enzinger, N., 22 Oct 2019, In : Science and technology of welding and joining. 2019, 8 p.

Research output: Contribution to journalArticleResearchpeer-review

CMT additive manufacturing of a high strength steel alloy for application in crane construction

Plangger, J., Schabhüttl, P., Vuherer, T. & Enzinger, N., 1 Jun 2019, In : Metals. 9, 6, 14 p., 650.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 2017, In : Welding in the world. 61, 1, p. 11-19

Research output: Contribution to journalArticleResearchpeer-review

Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels

Pouriamanesh, R., Dehghani, K., Vallant, R. & Enzinger, N., Nov 2018, In : Journal of Materials Engineering and Performance. 27, 11, p. 6058-6068 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding of Copper using Plasma Spraying for filler metal deposition

Stummer, M., Stütz, M., Aumayr, A. & Enzinger, N., 1 Nov 2018, In : Welding in the world. 62, 6, p. 1341-1350 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Elektronenstrahlschweißen einer artfremden Verbindung (A625/CB2) für Anwendungen im Kraftwerksbau

Wiednig, C. A., Enzinger, N. & Beal, C., 2016, In : Schweiss- & Prüftechnik. 01-02/2016, p. 8-13

Research output: Contribution to journalArticleResearch

Open Access
File

Elektronenstrahl-Schweißungen eines martensitischen Chromstahls mit lokalem Legieren

Rabl, A., Pixner, F., Duarte, B., Beal, C. & Enzinger, N., Mar 2019, In : Schweiss- & Prüftechnik. 72, 3/4, p. 54-60

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding

Havlik, P., Kouril, J., Foret, R., Dlouhy, I., Enzinger, N. & Wiednig, C. A., 2 Nov 2016, In : Materials Science Forum. 879, p. 714-719

Research output: Contribution to journalArticleResearchpeer-review

Experimental and numerical investigations on the punching failure of carbon fiber-reinforced plastics

Szlosarek, R., Karall, T., Enzinger, N., Hahne, C., Meyer, N. & Berger, A., Jul 2016, In : MP Materials Testing. 58, 7-8, p. 617-621 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Fatigue crack growth in full-scale railway axles – Influence of secondary stresses and load sequence effects

Rieger, M., Moser, C., Brunnhofer, P., Simunek, D., Weber, F. J., Deisl, A., Gänser, H. P., Pippan, R. & Enzinger, N., 1 Jan 2019, In : International Journal of Fatigue. 11 p., 105360.

Research output: Contribution to journalArticleResearchpeer-review

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Fracture angle search with Puck's 3D interfiber fracture criterion

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2016, In : Composites: Mechanics, Computations, Applications. 7, 4, p. 319-339

Research output: Contribution to journalArticleResearchpeer-review

Fracture angle search with Puck's 3D interfiber fracture criterion using the damped Newton's method

Szlosarek, R., Karall, T., Hahne, C., Berger, A. & Enzinger, N., 2016, In : Composites: Mechanics, Computations, Applications. 7, 4, p. 319-339 21 p.

Research output: Contribution to journalArticleResearchpeer-review

Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection

Weingrill, L. A., Schwald, M., Faustmann, C., Frühstück, D. & Enzinger, N., Jan 2019, In : MATEC Web of Conferences. 269, 8 p., 02001.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Hydrogen-induced plasticity in nanoporous palladium

Gößler, M., Steyskal, E-M., Stütz, M., Enzinger, N. & Würschum, R., 2018, In : Beilstein Journal of Nanotechnology . 9, p. 3013 3024 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

Rabl, A., Pixner, F., Duarte, B., Blatesic, D., Beal, C. & Enzinger, N., 8 Mar 2019, In : Welding in the world. 63, 2, p. 575-582 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Increasing of toughness of brittle type S690 HSS weld metal by application of reversible temper embrittlement (RTE)

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 25 Nov 2016, In : Welding in the world. p. 1-5

Research output: Contribution to journalArticleResearchpeer-review

Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains

Rath, G., Fuchs, F. & Enzinger, N., 2 Nov 2016, In : Materials Science Forum. 879, p. 508-513

Research output: Contribution to journalArticleResearchpeer-review

Influence of static strength on the fatigue resistance of welds

Steimbreger, C., Gubeljak, N., Enzinger, N., Ernst, W. & Chapetti, M., 25 May 2018, In : MATEC Web of Conferences. 165, 7 p., 13010.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of the focus wobbling technique on the integrity and the properties of electron beam welded MarBN steel

Rabl, A., Pixner, F., Blatesic, D., Béal, C. & Enzinger, N., 6 Jan 2019, In : Welding in the world. 63, 3, p. 715-724

Research output: Contribution to journalArticleResearchpeer-review

Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

Spachinger, S. J., Ernst, W. & Enzinger, N., 30 May 2017, In : Welding in the world. 61, 6, p. 1117-1131

Research output: Contribution to journalArticleResearchpeer-review

In situ characterization of hydrogen absorption in nanoporous palladium produced by dealloying

Steyskal, E-M., Wiednig, C. A., Enzinger, N. & Würschum, R., 2016, In : Beilstein Journal of Nanotechnology . 7, p. 1197-1201

Research output: Contribution to journalArticleResearchpeer-review

Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding

Prikhodko, S. V., Savvakin, D. G., Markovsky, P. E., Stasiuk, O. O., Enzinger, N., Deley, F., Flipo, B., Shirzadi, A., Davies, H. M., Davies, P. D., Penny, J., Bozhilov, K. & Ivasishin, O. M., 2019, In : Microscopy and microanalysis. 25, S2, p. 812-813

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Methods for the measurement of ferrite content in multipass duplex stainless steel welds

Putz, A., Althuber, M., Zelić, A., Westin, E. M., Willidal, T. & Enzinger, N., 1 Jun 2019, In : Welding in the world. 63, 4, p. 1075-1086 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure development of molybdenum during rotary friction welding

Stütz, M., Buzolin, R. H., Pixner, F., Poletti, M. C. & Enzinger, N., 2019, In : Materials characterization. 151, p. 506-518 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials

Sorger, G. L., Oliveira, J. P., Inácio, P. L., Enzinger, N., Vilaça, P., Miranda, R. M. & Santos, T. G., 1 Mar 2019, In : Journal of Materials Science and Technology. 35, 3, p. 360-368 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Powerful analytical solution to heat flow problem in welding

Nasiri, M. B. & Enzinger, N., 1 Jan 2019, In : International Journal of Thermal Sciences . 135, p. 601-612 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Residual stresses in 18CrNiMo7-6 linear friction welded high strength steel chains

Garcia Nunes, D., Effertz, P., Quintino, L., Pires, I., Fuchs, F. & Enzinger, N., Jun 2018, In : The international journal of advanced manufacturing technology. 96, 9-12, p. 3703-3710 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Rotary friction welding of molybdenum components

Stütz, M., Pixner, F., Wagner, J., Reheis, N., Raiser, E., Kestler, H. & Enzinger, N., 7 Feb 2018, In : International Journal of Refractory Metals & Hard Materials. 73, p. 79-84 6 p., RMHM_4664.

Research output: Contribution to journalArticleResearchpeer-review

Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

Orłowska, M., Brynk, T., Hütter, A., Goliński, J., Enzinger, N., Olejnik, L. & Lewandowska, M., 10 Mar 2020, In : Materials Science and Engineering A. 777, 15 p., 139076.

Research output: Contribution to journalArticleResearchpeer-review

Surface treatment for effective bonding in the sports industry

Rabl, A., Stummer, M., Pfund, M., Pongau, A. I. & Enzinger, N., 1 Feb 2018, In : Materials Testing. 60, 2, p. 128-133 6 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of process parameters in linear friction welded 30CrNiMo8 small cross-section: a modelling approach

Effertz, P., Fuchs, F. & Enzinger, N., 2019, In : Science and technology of welding and joining. 24, 2, p. 121-129 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-mechanical testing of TiO2 functional coatings using friction stir processing

Stummer, M., Enzinger, N. & Weiß, C., 2018, In : Materials Testing. 6, 9, p. 818-824

Research output: Contribution to journalArticleResearchpeer-review