Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Author

  • Christof Sommitsch

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review

Application of thermo-calc TCFE7 to high-alloyed mottled cast iron

Paar, A., Elizondo, L., Brandner, M., Trickl, T., Sonderegger, B., Beal, C. & Sommitsch, C., 2016, In : Materials Science Forum. 879, p. 1431-1436 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of the intermetallic layer thickness in cold metal transfer welding of aluminum to steel

Silvayeh, Z., Götzinger, B., Karner, W., Hartmann, M. & Sommitsch, C., 22 Dec 2018, In : Materials. 12, 1, 35.

Research output: Contribution to journalArticleResearchpeer-review

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Characterization of localized corrosion of heat treated Er- and Zr-containing A356 alloys in 3.5 wt% NaCl aqueous solution

Colombo, M., Buzolin, R. H., Gariboldi, E., Vallant, R. & Sommitsch, C., 7 Jun 2018, In : Materials and corrosion. p. 1-13

Research output: Contribution to journalArticleResearchpeer-review

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CP-FE modelling and experimental investigation of gradient structured Al wires

Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2017, In : International journal of materials research = Zeitschrift für Metallkunde. 108, 9, p. 741-749 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Evaluation and optimization of the bonding behavior between substrate and coating processed by laser cladding

Vollmer, R. & Sommitsch, C., 2016, In : Physics procedia .

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Evolution of the substructure of a novel 12% Cr steel under creep conditions

Yadav, S. D., Kalácska, S., Dománková, M., Yubero, D. C., Resel, R., Groma, I., Beal, C., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 1 May 2016, In : Materials characterization. 115, p. 23-31 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Experimental investigations on single-sided CMT welding of hybrid aluminum-steel blanks

Silvayeh, Z., Vallant, R., Sommitsch, C., Götzinger, B. & Karner, W., 2016, Proceedings of the 10th International Conference on Trends in Welding Research. p. 32 - 35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von 6xxx Aluminiumblechen

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2018.

Research output: Contribution to conferencePosterResearch

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von Aluminiumblechen

Hönsch, F., 2017, 124 p.

Research output: ThesisMaster's ThesisResearch

File

Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique

Ayatollahi, M. R., Razavi, S. M. J., Sommitsch, C. & Moser, C., 2017, Materials Science Forum. Switzerland: Trans Tech Publications Ltd., Vol. 879. p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, (Submitted) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

From ICDP to (graphitized) HSS: Sophisiticated work roll grades for highest demands in rolling mills for flat products

Armin, P., Brandner, M., Trickl, T., Elizondo, L., Beal, C. & Sommitsch, C., 2016, 10th International Rolling Conference and the 7th European Rolling Conference . Buchmayr, B. (ed.). ASMET, Austrian Society for Metallurgy and Materials

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

GUEST EDITORIAL

Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., 1 Oct 2018, In : Journal of Materials Engineering and Performance. 27, 10, p. 4981-4982 2 p.

Research output: Contribution to journalEditorialResearchpeer-review

HOT DUCTILITY BEHAVIOR OF A CONTINUOUSLY CAST Ti-Nb MICROALLOYED STEEL

Hoflehner, C., Beal, C., Sommitsch, C., Six, J. & Ilie, S., 15 Nov 2019, METAL 2019: 28th International Conference on Metallurgy and Materials ; proceedings. Ostrava: TANGER Ltd., Ostrava, p. 84 - 89 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Induktionsschweißen von carbonfaserverstärktem Polyamid 66 im automobilen Karosseriebau

Forstner, T., Sommitsch, C. & Fischer, F., 28 Jun 2018, In : Zeitschrift Kunststofftechnik. 14, 4, p. 233-278

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence and evaluation of the lubrication on the cold formability of a second-generation TWIP steel

Boskovic, V., Sommitsch, C. & Preininger, M., Jun 2017.

Research output: Contribution to conferencePaperResearch

Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties

Skalon, M., Görtler, M., Meier, B., Arneitz, S., Urban, N., Mitsche, S., Huber, C., Franke, J. & Sommitsch, C., 29 Dec 2019, In : Materials. 13, 1, 14 p., 139.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of microstructural parameters of indefinite chill alloys on flexural strength and Young's modulus

Paar, A., Schneider, R. & Sommitsch, C., 2018, In : Materials Testing. 60, 3, p. 239-244

Research output: Contribution to journalArticleResearchpeer-review

Influence of the E-coating process on the mechanical properties of aluminum welds

Silvayeh, Z., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticleResearchpeer-review

Open Access