@inproceedings{800fbb3eccd04aad9799e73ae4187756,
title = "3D Printed Electromagnetic Absorber Built with Conductive Carbon-filled Filament",
abstract = "This article presents a method for manufacturing a frequency selective surface (FSS) using the 3D printing technology, including material characterization, design, fabrication, and evaluation. The FSS design is based on a three-layer structure. The first layer is a 3D printed lossy material, the second layer is an air gap, and the third layer is a ground plane. By changing the geometrical parameters of the 3D printed layer, it is possible to tune the frequency of the absorption band of the FSS. ",
keywords = "3D printing, conductive lossy material, frequency selective surface, radiated emissions",
author = "Rui Mi and Wei Zhang and Kaustav Ghosh and Sameer Walunj and Qian Liu and Jacques Rollin and Philippe Sochoux and David Pommerenke and Victor Khilkevich",
note = "Funding Information: ACKNOWLEDGMENT This paper is based upon work supported partially by the National Science Foundation under Grant No. IIP-1916535. Publisher Copyright: {\textcopyright} 2021 IEEE.; 2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe : EMC/SI/PI/EMC Europe 2021, EMC/SI/PI/EMC Europe 2021 ; Conference date: 26-07-2021 Through 20-08-2021",
year = "2021",
month = jul,
day = "26",
doi = "10.1109/EMC/SI/PI/EMCEurope52599.2021.9559309",
language = "English",
series = "2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021",
publisher = "Institute of Electrical and Electronics Engineers",
pages = "266--271",
booktitle = "2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021",
address = "United States",
}