FWF - Motion Correction - Mathematical methods for motion-aware medical imaging

Project: Research project

Description

The proposed project is settled on the interface of basic and application-driven mathematical and medical engineering research and aims at laying foundations for the transfer of novel mathematical methods for motion-aware tomographic imaging into commercial applications. Tomographic devices, in particular magnetic resonance imaging (MRI), constitute essential diagnostic tools of modern medicine. They allow for the non-invasive visualization of organs and tissue inside the
body, delivering valuable information, e.g., for early-stage diagnosis as well as treatment planning.
The key ingredient that makes tomography possible is the reconstruction of an image of the interior by just measuring indirectly outside this object. This task poses a mathematical problem whose solution is realized in each tomographic device.
The research in this project addresses one of the major current challenges for present tomographic devices: The fast and efficient reconstruction of dynamics and patient motion. Currently, physical speed limits in the acquisition of data often prevent such motion-aware imaging. In particular, for MRI, patient movement during acquisition such as breathing causes severe artifacts in the reconstructions, making the repetition of measurements necessary. More importantly, there are
many situations where one aims at imaging dynamics for diagnostic purposes, such as pumping and blood-flow motion of the heart. Due to these dynamics being faster than the measurement device, their imaging is presently only possible accepting serious limitations such a long breathholds, high scan times and patient discomfort. As physical limits are involved, technological progress is meeting its limits and further improvements can only be achieved with more
sophisticated image reconstruction techniques. To this aim, mathematical basic research is indispensable, bearing great potential to significantly extend current possibilities in medical
imaging. In this respect, with progress in the mathematical theory of optimal transport, new techniques recently emerged that show promise for application in motion-aware medical imaging.
It is the goal of this project to carry out the necessary steps for bringing these newly-emerged mathematical techniques to concrete application in motion-aware MRI, building on the previous work and experience of the participating research groups. It centers around a novel framework for jointly estimating motion and image content that bears the potential to overcome many practical limitations of existing methods as well as to open new horizons for diagnostic imaging. In a joint
effort of the mathematical and medical engineering project partners, the proposed approach shall be developed up to a level where it can be readily applied in clinical practice and potentially utilized
in clinical research studies. Its eventual realization in tomographic devices and clinical routine, however, can not be achieved without cooperation partners from industry. The project shall therefore in particular lay the basis for such corporate partnerships in medical-engineering and
tomographic-imaging-related business areas.
StatusActive
Effective start/end date1/12/1731/03/20