CD-Laboratory for Materials Modelling and Simulation

Friedl, Thomas (Co-Investigator (CoI))
Hadzic, Semin (Co-Investigator (CoI))
Timoshenkov, Alexander (Co-Investigator (CoI))
Herbitschek, Leander (Co-Investigator (CoI))
Kuduzovic, Asmir (Co-Investigator (CoI))
Penker, Herbert (Co-Investigator (CoI))
Krumphals, Friedrich (Co-Investigator (CoI))
Krumphals, Alfred (Co-Investigator (CoI))
Sommitsch, Christof (Principal Investigator (PI))

Institute of Materials Science, Joining and Forming (3030)

Project: Research project

11 (Old data) Lecture or Presentation
4 Conference paper
4 Article
2 Poster

21 results

2014
Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata
Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 2014, In: International Journal for Multiscale Computational Engineering. 12, 1, p. 23-31
Research output: Contribution to journal › Article › peer-review
2012

Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V
Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Proceedings of the 12th World Conference on Titanium. Beijing: Science Press, Vol. Volume I. p. 493-496
Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
Influence of Different Tempering Temperatures on Delayed Fracture Susceptibility of High Strength Quenched Steel
Kuduzovic, A., Sommitsch, C. & Kienreich, R., 2012, Materials Science & Technology Conference and Exhibition. Pittsburgh, Pennsylvania: ., p. 104-104
Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
Mikrostrukturmodellierung von Ti-6Al-4V während der thermomechanischen Behandlung mittels zellularem Automaten
Krumphals, A. & Sommitsch, C., 4 May 2012.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata
Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 15 Oct 2012.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata
Krumphals, A., Stockinger, M. & Sommitsch, C., 10 Sept 2012.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata
Krumphals, A., Sommitsch, C. & Stockinger, M., 2012, (Accepted/In press) 6th European Congress on Computational Methods in Applied Sciences and Engineering. .
Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
Modellierung der Kinetik von Korn- und Phasengrenzen im Zweiphasengebiet von Ti-6Al-4V zur Vorhersage der Kornvergröberung mittels zellularem Automaten
Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 16 Apr 2012.
Research output: Contribution to conference › (Old data) Lecture or Presentation
2011

Damage analysis of extrusion tools made from the austenitic hot work tool steel Böhler W750
Krumphals, F., Wlanis, T., Sievert, R., Wieser, V. & Sommitsch, C., 2011, In: Computational Materials Science. 50, p. 1250-1255
Research output: Contribution to journal › Article › peer-review

Open Access
File
Evolution of beta grain size during beta phase processing of Ti-6Al-4V
Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Mikrostrukturmodellierung in Ti-6Al-4V während der thermo-mechanischen Behandlung
Krumphals, A. & Sommitsch, C., 4 Nov 2011.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modeling of beta grain size during beta phase processing of Ti-6Al-4V
Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modellierung und Simulation am Institut für Werkstoffkunde
Sonderegger, B., Pein, C., Zamani, H., Wachtler, C., Dikovits, M., Poletti, M. C., Krumphals, A., Krumphals, F., Timoshenkov, A., Kuduzovic, A. & Hadzic, S., 5 May 2011.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten
Krumphals, A., Stockinger, M. & Sommitsch, C., 2011, XXX. Verformungskundliches Kolloquium. ., p. 31-36
Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten
Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Vorrichtung zur Prüfung der Anfälligkeit zur H-Versprödung / Device for testing the susceptibility to H-embrittlement
Kuduzovic, A., Sommitsch, C. & Kienreich, R., 2011.
Research output: Contribution to conference › Poster
2010

Microstructure modelling of Ti-6Al-4V during thermomechanical treatment
Krumphals, A. & Sommitsch, C., 8 Nov 2010.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment
Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.
Research output: Contribution to conference › Poster
Modelling of structure evolution and mechanical properties during thermo-mechanic processing of the α−β titanium alloy Ti-6Al-4V
Krumphals, A. & Sommitsch, C., 25 Nov 2010.
Research output: Contribution to conference › (Old data) Lecture or Presentation
Physically based microstructure modelling of AA6082 during hot extrusion
Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2010, In: Key Engineering Materials. 424, p. 27-34
Research output: Contribution to journal › Article › peer-review
2009

Modelling of microstructure evolution in hot work tool steels during service
Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In: Computer Methods in Materials Science . 9, p. 228-233
Research output: Contribution to journal › Article

CD-Laboratory for Materials Modelling and Simulation

Research output

Search results