Thomas-Peter Fries

Univ.-Prof. Dr.-Ing. habil.

20052020
If you made any changes in Pure these will be visible here soon.

Research Output 2005 2019

Filter
Conference contribution

A fictitious domain method with higher-order accurate integration in cut elements

Fries, T. P., Omerovic, S., Schöllhammer, D. & Stanford, J. W., 2018, Proceedings ECCM VI, ECFD VII. p. 3994-3405

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A higher-order accurate numerical integration for the XFEM and fictitious domain methods

Fries, T-P., 2015, Book of abstract. ., p. 95-96

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A higher-order conformal decomposition FEM for NURBS-based geometries

Stanford, J. W. & Fries, T. P., 2018, Proceedings ECCM VI, ECFD VII. p. 3406-3416

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access

An Alternative Isogeometric Boundary Element Formulation

Marussig, B., Zechner, J., Beer, G., Dünser, C. & Fries, T-P., 2014, Isogeometric Analysis and Applications (IGAA 2014). ., p. 30-30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automatic conformal decomposition of elements cut by NURBS

Steidl, J. W. & Fries, T. P., 2016, ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens , Vol. 2. p. 2591-2600 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

NURBS
Decomposition
Decompose
Fictitious Domain
Extended Finite Element Method

Boundary Element Analysis with Trimmed NURBS and a Generalized IGA Approach

Beer, G., Marussig, B., Zechner, J., Dünser, C. & Fries, T-P., 2014, Proceedings of the jointly organized WCCM XI, ECCM V, ECFD VI. Barcelona: ., p. 2445-2456

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Classical shell analysis in view of tangential differential calculus

Schöllhammer, D. & Fries, T. P., 2018, Proceedings ECCM VI, ECFD VII. p. 3646-3657

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Crack propagation by using crack opening displacements in 2D and 3D XFEM

Schätzer, M. & Fries, T-P., 2015, Book of abstracts. ., p. 62-63

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Heuristic pressure profiles in hydraulic fracturing

Schätzer, M. & Fries, T. P., 2018, Proceedings in Applied Mathematics and Mechanics, Special Issue. Wiley, Vol. 18,1 . p. e20180006 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Higher-order accurate integration of 3D geometries defined by level-sets

Fries, T-P., 2015, Book of abstracts. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Higher-order approximations of incompressible Navier-Stokes flows on curved manifolds

Fries, T. P., 2018, Proceedings of the 13th World Congress on Computational Mechanics (WCCM XIII), New York, USA.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Higher-order conformal decomposition finite element method

Omerovic, S. & Fries, T. P., 2016, Proceedings in Applied Mathematics and Mechanics. wiley:adr: Wiley-Blackwell, Vol. 16.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Higher-order surface FEM for incompr. Navier-Stokes flows on manifolds

Fries, T. P., 2018, Proceedings in Applied Mathematics and Mechanics, Special Issue. Wiley, Vol. 18,1. 2 p. e201800012

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Hydraulic fracturing with a simplified fluid model and XFEM

Schätzer, M. & Fries, T. P., 2016, Proceedings in Applied Mathematics and Mechanics. wiley:adr: Wiley-Blackwell, Vol. 16.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Integration of design and analysis through boundary integral equations

Marussig, B., Zechner, J., Beer, G. & Fries, T. P., 2016, ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens , Vol. 3. p. 6526-6538 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Boundary integral equations
Boundary Integral Equations
Computer aided design
Computer Aided Geometric Design
Computational efficiency

Isogeometric Boundary Element Analysis with Trimmed Geometries

Marussig, B., Zechner, J., Beer, G. & Fries, T-P., 2015, III International Conference on Isogeometric Analysis - IGA 2015. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE), p. 122-122

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Isogeometric Boundary Element Method with Hierarchical Matrices

Zechner, J., Marussig, B., Beer, G., Dünser, C. & Fries, T-P., 2014, Proceedings of the jointly organized WCCM XI, ECCM V, ECFD VI. Barcelona: ., p. 2457-2468

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Kirchhoff-Love shell theory based on Tangential Differential Calculus

Schöllhammer, D. & Fries, T. P., 2018, Proceedings in Applied Mathematics and Mechanics. Wiley

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Medical training simulators for bilateral sagittal split osteotomy and regional aneasthesia in virtual environments

Knott, T., Ullrich, S., Grottke, O., Fries, T., Gerressen, M., Deserno, T. M., Rossaint, R. & Kuhlen, T., 2010, Proceedings CURAC 2010. Vol. 1475. p. 137-140 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Virtual reality
Crack propagation
Visualization
Simulators
Tissue

The extended finite element method applied to 3D free-surface flows

Sauerland, H. & Fries, T. P., 2012, ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers. p. 2285-2293 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Extended Finite Element Method
Free Surface Flow
Finite element method
Discontinuity
Flow simulation

The XFEM for a simplified model in hydraulic fracturing

Schätzer, M. & Fries, T. P., 2016, ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens , Vol. 1. p. 1637-1646 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hydraulic fracturing
Hydraulics
Energy Release Rate
Energy release rate
Fracturing fluids

The XFEM with an Implicit-Explicit Crack Description for a Plane-Strain Hydraulic Fracture Problem

Weber, N. & Fries, T-P., 2013, Proceedings in Applied Mathematics and Mechanics. ., p. 83-84

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

XFEM for Deformation Theory of Plasticity

Omerovic, S. & Fries, T-P., 2015, Book of Abstracts. ., p. 251-251

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

XFEM-simulation of hydraulic fracturing in 3D with emphasis on stress intensity factors

Fries, T-P., Schätzer, M. & Weber, N., 2014, Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI). ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

XFEM vs. r-Refinement for Higher-Order Approximations in Elastoplasticity

Omerovic, S. & Fries, T-P., 2015, Conference Program and Book of Abstracts. ., p. 40-41

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review