Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

Filter
Conference contribution
2019

Broad Ion Beam Cross Section Preparation on Nitrocarburisedand Oxidised Steel Samples to Correlate Microstructure andTribological Behaviour

Rattenberger, J., Mitsche, S., Fitzek, H. M., Velkavrh, I., Diem, A. & Schröttner, H., 2019, Proceedings-14th Multinational Congress on Microscopy, Belgrad-Serbia, Sept. 15-20 2019. p. 37-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

In situ EBSD Investigations of Al-Mg-Si-Alloy during heating

Mitsche, S., Grasserbauer, J. & Pölt, P., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 106-108

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Investigation of domains in Pr2NiO4+delta by transmission electron microscopy

Gspan, C., Bucher, E., Egger, A., Schrödl, N., Berger, C., Dienstleder, M., Mitsche, S., Sitte, W. & Grogger, W., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 622-625

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

High spatial and energy resolution x-ray analysis of thin specimens by scanning electron microscopy

Mitsche, S., Haberfehlner, G., Dienstleder, M. & Pölt, P., 2015, Modern development and applications in microbeam analysis. ., p. 373-373

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Combined EDS and WDS analysis of thin specimens with high spatial and energy resolution in the scanning electron microscope

Mitsche, S. & Pölt, P., 2014, Microscopy for Global Challenges. ., p. IT-4-P3166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Hot deformation studies of creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 2013, Magnesium; Aluminium; Titanium Science and Technology. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

In situ mechanical polarization of polycristalline BaTiO3 in the ESEM with subsequent EBSD investigations

Reichmann, A., Reichmann, K., Mitsche, S., Zankel, A. & Pölt, P., 2013, Instrumentation and Methods; Materials Science. ., p. 377-378

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2012

Investigation of Micro-Crack propagation tn the Nickel based alloy 80A during hot forming by 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012, Electron Probe Microanalysis of Materials Today. ., p. 358-358

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Porous silicon and Ni-nanostructures , a very versatile, but still poorly characterized

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2012, Physical Sciences: Applications. ., p. 489-490

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Critical issues with creep-exposed ferritic-martensitic welded joints for thermal power plants

Mayr, P., Schlacher, C. & Mitsche, S., 2011, International Conference of the IIW. ., p. 417-425

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Temperature and strain rate on the softening process in Allvac718PLUS

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, International Conference on Processing & Manufacturing of Advanced Materials. ., p. 543-543

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Improved creep and oxidation behavior of a martensitic 9Cr steel by the controlled addition of boron and nitrogen

Mayr, P., Holzer, I., Mendez Martin, F., Albu, M., Mitsche, S., González, V. & Agüero, A., 2010, (Accepted/In press) Liège Conference on Materials for Advanced Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Nanoanalytical characterization of organic photodiode by electron microscopy and atomic force microscopy

Fladischer, S., Neuhold, A., Mitsche, S., Matsko, N., Kraker, E., Haase, A., Lamprecht, B., Resel, R. & Grogger, W., 2010, International Conference on Organic Electronics. ., p. 235-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Organic Multylayer Photodiode: Interface Roughness and Electron Density Profile in a Stacked Device Structure

Neuhold, A., Fladischer, S., Mitsche, S., Matsko, N., Flesch, H-G., Moser, A., Novak, J., Kraker, E., Haase, A., Grogger, W. & Resel, R., 2010, International Conference on Organic Electronics. ., p. 237-237

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Evolution of Microstructure and Properties for Friction Stir Welded Martensitic Precipitation-Hardening Steels

Weinberger, T., Führer, B., Khosa, S. U., Enzinger, N., Cerjak, H-H., Schröttner, H. & Mitsche, S., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 398-402

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 2009, Instrumentation and Methodology. Wien: Facultas, p. 81-82

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009, Materials Science. Wien: Facultas, p. 257-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2009, Proceeding International Conference on Extrusion and Benchmark. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, Verformungskundliches Kolloquium. ., p. 123-130

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DualBeam FIB application of 3D EDXS for superalloy δ-phase characterization

Wagner, J., Schaffer, M., Schröttner, H., Mitsche, S., Letofsky-Papst, I., Stotter, C. & Sommitsch, C., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 687-688 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental determination of the total scattering cross section of water vapour and of the effective beam gas path length in a low vacuum scanning electron microscope

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S., Schaffer, M. & Zankel, A., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 601-602 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Ebner, T., 2008, Superalloys2008. ., p. 855-861

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys - their Physical and Mechanical Properties ; Vol. 1. Wiley-VCH , p. 1077-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Reconstruction of δ-phase in superalloy by 3D EDXS in a DualBeam FIB

Wagner, J., Schaffer, B., Schröttner, H., Mitsche, S., Stotter, C. & Sommitsch, C., 2008, Table of Contents. ., p. 984-985

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Total scattering cross section of N2 and effective beam gas path length measurements

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S., Schaffer, M. & Zankel, A., 2008, MicroScience. ., p. F1.1 P6-F1.1 P6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

δ-Phase characterization of superalloy allvac 718 PlusTM

Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Crack behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007, Modern developments and applications in Microbeam Analysis. ., p. 287-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007, Proc. Electron Backscatter Diffraction 2007. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fundamental aspects of oligo-phenylen adsorption and thin film layer growth on gold surfaces

Müllegger, S., Frank, P., Salzmann, I., Haber, T., Resel, R., Hlawacek, G., Teichert, C., Hänel, K., Strunskus, T., Wöll, C., Mitsche, S., Pölt, P. & Winkler, A., 2007, Winterschool on organic electronics. ., p. 64-64

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Oligo-phenylen adsorption and thin film layer growth on gold surfaces

Müllegger, S., Frank, P., Salzmann, I., Haber, T., Resel, R., Hlawacek, G., Teichert, C., Hänel, K., Strunskus, T., Wöll, C., Mitsche, S., Pölt, P. & Winkler, A., 2007, Wilhelm and Else Heraeus Seminar. ., p. 1-ff

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The E(SEM) - A microanalytical tool and a microlab

Pölt, P., Mitsche, S., Reichmann, A. & Zankel, A., 2007, Proceedings 8th Multinational Congress on Microscopy. ., p. 55-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Time Dependent Study of Ion- and Electron Currents under Water Vapour Conditions

Rattenberger, J., Wagner, J., Schröttner, H., Schaffer, M., Mitsche, S. & Zankel, A., 2007, 14.Tagung Festkörperanalytik. ., p. P1-P1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Einfluss langer Betriebszeiten auf die Mikrostruktur und das Zeitstandverhalten

Cerjak, H-H., Sonderegger, B., Holzer, I., Kozeschnik, E., Pein, C., Dimmler, G., Kothleitner, G. & Mitsche, S., 2006, 32. MPA Seminar. ., p. 19.1-19.23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural analysis on a creep resistant martensitic 9-12% Cr steel using the EBSD method

Sonderegger, B., Mitsche, S. & Cerjak, H-H., 2006, Materials for advanced power engineering. ., p. 1199-1205

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Recrystallization behaviour of the nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, EBSD 2006, Conference Procedings. ., p. 7-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Automated particle analysis of aerosols formed during biomass combustion by SEM/EDX

Mitsche, S., Pölt, P., Schmied, M., Brunner, T., Joeller, M. & Obernberger, I., 2005, International Workshop"Aerosol in Biomass Combustion". ., p. 133-144

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Schmiedetechnik. Leoben: Lehrstuhl für Umformtechnik, p. 113-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD Investigations of High Iron Oxide containing Glass Ceramics

Völksch, G., Harizanova, R., Mitsche, S., Pölt, P. & Rüssel, C., 2005, European Microbeam Analysis Society EMAS 2005. ., p. 282-282

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ESEM In Situ Heating Stage Experiments on the Sintering behaviour of "Green Body" Ceramics

Wagner, J., Schröttner, H., Reichmann, A., Mitsche, S. & Schmied, M., 2005, Microscopy Conference - Dreiländertagung. ., p. 6-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of volcanic Particles by SEM-EDS

Reichmann, A., Mitsche, S., Obenholzner, J. H. & Pölt, P., 2005, European Microbeam Analysis Society EMAS 2005. ., p. 330-330

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Über die Bestimmung des rekristallisierten Anteils bei der Warmumformung

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, Verformungskundliches Kolloquium. ., p. 113-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2004

Advanced investigations of the composition of submicron particles by using EDXS and Monte Carlo methods

Wagner, J., Schmied, M. & Mitsche, S., 2004, 13th European Microscopy Congress. ., p. 743-744

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004, Microscience 2004 / International Conference and Exhibition. ., p. 24-24

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Channeling contrast by Focused Ion Beam and EBSD - two complementary techniques

Schmied, M. & Mitsche, S., 2004, 13th European Microscopy Congress. ., p. 159-160

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - and the recrystallisation of Ni-base alloys

Pölt, P., Mitsche, S., Somitsch, C. & Walter, M., 2004, 13th European Microscopy Congress. ., p. 695-696 (Proceeding Vol.2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD – and the recrystallisation of Ni-base-alloys

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004, Proceedings of the 13th European Microscopy Congress. Liège: Belgian Soc. for Microscopy, p. 695-696

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review