Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

(Old data) Lecture or Presentation

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis based on WDS: applications, problems, solutions

Pölt, P. & Mitsche, S., 4 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combined Orientation and Phase Contrast Imaging of Precipitates in 9-12% Cr Steels

Sonderegger, B., Mitsche, S. & Cerjak, H-H., 26 Sep 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Controlling the film growth of oligo-phenylenes on gold by surface structure and surface modifications

Winkler, A., Müllegger, S., Mitsche, S. & Pölt, P., 24 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD-Untersuchungen des Rekristallisationsverhaltens der Nickelbasislegierung Alloy 80A während der Warmverformung

Mitsche, S., Sommitsch, C. & Pölt, P., 27 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Effect of substrate structures on organic thin film morphology: Oligo-phenyles on gold

Müllegger, S., Mitsche, S., Pölt, P., Hänel, K., Birkner, A., Wöll, C. & Winkler, A., 12 Mar 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Einfluss langer Betriebszeiten auf die Mikrostruktur und das Zeitstandfestigkeitsverhalten

Cerjak, H-H., Sonderegger, B., Holzer, I., Kozeschnik, E., Mayr, P., Pein, C., Dimmler, G., Kothleitner, G. & Mitsche, S., 5 Oct 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 30 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Gefügecharakterisierung der Superlegierung Allvac 718 PlusTM mittels elektronenmikroskopischer Methoden

Mitsche, S., Huber, D., Wagner, J., Letofsky-Papst, I., Sommitsch, C. & Stockinger, M., 15 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain Boundaries: Still Active in Electronic Ceramics

Reichmann, K., Kirstein, K. & Mitsche, S., 17 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

High spatial and energy resolution x-ray analysis of thin specimens by scanning electron microscopy

Mitsche, S., Melischnig, A., Haberfehlner, G., Dienstleder, M. & Pölt, P., 3 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot deformation studies of a creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 3 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on the softening processes in Allvac 718Plus

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Enzinger, N., Schröttner, H. & Mitsche, S., 31 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructural evolution of AA6082 with small aluminides under hot torsion and friction stir processing

Poletti, M. C., Krumphals, F., Gao, Z., Enzinger, N. & Mitsche, S., 15 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 22 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On meta-dynamic and static recrystallisation of the nickel based alloy 80a

Sommitsch, C., Pölt, P., Mitsche, S. & Kleber, S., 12 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Orientation contrast images of different ceramic materials with the SEM

Reichmann, A., Mitsche, S., Reingruber, H., Pölt, P., Reichmann, K., Simic, S. & Zankel, A., 15 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 25 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Recrystallization behaviour of the nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 3 Apr 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

Mitsche, S., Sommitsch, C. & Pölt, P., 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

The ESEM - A microanalytical tool and a microlab

Pölt, P., Reichmann, A., Mitsche, S. & Zankel, A., 17 Jun 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Über die Bestimmung des rekristallisierten Anteils bei Warmumformung

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 26 Feb 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Abstract

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014, p. MS-4-P-3413.

Research output: Contribution to conferenceAbstractResearchpeer-review

Multi-Scale-Analysis of Modern Aluminium-Alloys

Schröttner, H., Panzirsch, B., Albu, M., Mitsche, S., Mertschnigg, S., Gspan, C., Rattenberger, J., Wagner, J. & Hofer, F., 2014, p. MS-4-P-2525.

Research output: Contribution to conferenceAbstractResearchpeer-review

Article

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

A Method to Measure the Total Scattering Cross Section and Effective Beam Gas Path Length in a Low-Vacuum SEM

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S. & Zankel, A., 2009, In : Scanning. 31, p. 1-7

Research output: Contribution to journalArticleResearchpeer-review

Analysis of Submicron Particles by Scanning Electron Microscopy-Energy-Dispersive X-ray Spectrometry—Accuracy of Size Measurement

Mitsche, S., Pölt, P. & Wagner, J., 2006, In : Scanning. 28, p. 282-288

Research output: Contribution to journalArticleResearchpeer-review

Assessment of dynamic softening mechanisms in Allvac® 718PlusTM by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, In : Materials science and engineering / A. 528, p. 3754-3760

Research output: Contribution to journalArticleResearchpeer-review

Biotransformation of Scheelite CaWO4 by the Extreme Thermoacidophile Metallosphaera sedula: Tungsten–Microbial Interface

Blazevic, A., Albu, M., Mitsche, S., Rittmann, S., Habler, G. & Milojevic, T., 2 Jul 2019, In : Frontiers in Microbiology . 10, 11 p., 1492.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Calcite twinning lammelae stress analysis using OIM (EBSD) data

Rez, J., Rostislav, M., Mitsche, S. & Pölt, P., 2005, In : Geological research in Moravia and Silesia. 12, p. 111-114

Research output: Contribution to journalArticleResearch

Crystallization in High Iron Containing Silicate Glasses - Electron Microscopy Investigation

Völksch, G., Harizanova, R., Rüssel, C., Mitsche, S. & Pölt, P., 2004, In : Glass science and technology. 77C, p. 438-441

Research output: Contribution to journalArticleResearchpeer-review

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

Dynamic recrystallization of Ni-base alloys - Experimental results and comparisons with simulations

Pölt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering / A. 420, p. 306-314

Research output: Contribution to journalArticleResearchpeer-review

EBSD Analysis of the recrystallization behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C. & Pölt, P., 2006, In : Practical metallography = Praktische Metallographie. Sonderheft, 38, p. 43-50

Research output: Contribution to journalArticleResearchpeer-review

Enzymatic hydrolysis of PTT polymers and oligomers

Eberl, A., Heumann, S., Kotek, R., Kaufmann, F., Mitsche, S., Cavaco-Paulo, A. & Gübitz, G., 2008, In : Journal of Biotechnology. 135, 1, p. 45-51

Research output: Contribution to journalArticleResearchpeer-review

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N., Mitsche, S. & Sommitsch, C., 2013, In : Welding in the world. 57, 6, p. 895-902

Research output: Contribution to journalArticleResearchpeer-review

Geopolymerization of coal fly ash in the presence of electric arc furnace dust

Nikolic, I., Crossed, D. S., Belcic, D., Zejak, R., Karanovic, L., Mitsche, S. & Radmilovic, V., 2013, In : Minerals engineering. 49, p. 24-32

Research output: Contribution to journalArticleResearchpeer-review

Influence of temperature and strain rate on dynamic softening processes in AllvacR 718PlusTM

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2012, In : Materials Science Forum. 706-709, p. 2440-2445

Research output: Contribution to journalArticleResearchpeer-review

In situ mechanical compression of polycrystalline BaTiO3 in the ESEM

Reichmann, A., Mitsche, S., Zankel, A., Pölt, P. & Reichmann, K., 2014, In : Journal of the European Ceramic Society. 34, p. 2211-2215

Research output: Contribution to journalArticleResearchpeer-review

Interaction of recrystallization and precipitation during hot forming of alloy 80A

Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In : Materials Science Forum. 539-543, p. 2988-2993

Research output: Contribution to journalArticleResearchpeer-review

Intermetallic Compound and Void Kinetics Extraction From Resistance Evolution in Copper Pillars During Electromigration Stress Tests

Hartler, C., Moreau, S., Chery, E., Charbonnier, J., Siegert, J., Plihon, A., Assous, M., Mitsche, S., Simic, S., Schrank, F. & Grogger, W., 2018, In : IEEE Transactions on Device and Materials Reliability. 18, 2, p. 313-320 17822358.

Research output: Contribution to journalArticleResearch

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Schröttner, H., Mitsche, S. & Enzinger, N., 2012, In : Advanced Materials Research. 409, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

Kuduzovic, A., Poletti, M. C., Sommitsch, C., Domankova, M., Mitsche, S. & Kienreich, R., 2014, In : Materials science and engineering / A. 590, p. 66-73

Research output: Contribution to journalArticleResearchpeer-review