Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

Adsorption and growth of p-quaterphenyl on gold surfaces

Müllegger, S., Salzmann, I., Resel, R., Hlawacek, G., Teichert, C., Mitsche, S., Pölt, P. & Winkler, A., 2003, ECOSS 22. ., p. 17-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Advanced investigations of the composition of submicron particles by using EDXS and Monte Carlo methods

Wagner, J., Schmied, M. & Mitsche, S., 2004, 13th European Microscopy Congress. ., p. 743-744

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Advanced investigations of the composition of submicron particles by using EDXS and Monte Carlo methods

Wagner, J., Schmied, M. & Mitsche, S., 2004.

Research output: Contribution to conferencePosterResearch

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

A Method to Measure the Total Scattering Cross Section and Effective Beam Gas Path Length in a Low-Vacuum SEM

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S. & Zankel, A., 2009, In : Scanning. 31, p. 1-7

Research output: Contribution to journalArticleResearchpeer-review

Analysis based on WDS: applications, problems, solutions

Pölt, P. & Mitsche, S., 4 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of Submicron Particles by Scanning Electron Microscopy-Energy-Dispersive X-ray Spectrometry—Accuracy of Size Measurement

Mitsche, S., Pölt, P. & Wagner, J., 2006, In : Scanning. 28, p. 282-288

Research output: Contribution to journalArticleResearchpeer-review

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004, Microscience 2004 / International Conference and Exhibition. ., p. 24-24

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Assessment of dynamic softening mechanisms in Allvac® 718PlusTM by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, In : Materials science and engineering / A. 528, p. 3754-3760

Research output: Contribution to journalArticleResearchpeer-review

Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, Verformungskundliches Kolloquium. ., p. 123-130

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automated particle analysis of aerosols formed during biomass combustion by SEM/EDX

Mitsche, S., Pölt, P., Schmied, M., Brunner, T., Joeller, M. & Obernberger, I., 2005, International Workshop"Aerosol in Biomass Combustion". ., p. 133-144

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automated particle size measurement of submicron particles in scanning electron microscopy

Mitsche, S., Pölt, P. & Schmied, M., 2003, Scanning 2003, San Diego; Scanning 25,. ., p. 62-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Biotransformation of Scheelite CaWO4 by the Extreme Thermoacidophile Metallosphaera sedula: Tungsten–Microbial Interface

Blazevic, A., Albu, M., Mitsche, S., Rittmann, S., Habler, G. & Milojevic, T., 2 Jul 2019, In : Frontiers in Microbiology . 10, 11 p., 1492.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Broad Ion Beam Cross Section Preparation on Nitrocarburisedand Oxidised Steel Samples to Correlate Microstructure andTribological Behaviour

Rattenberger, J., Mitsche, S., Fitzek, H. M., Velkavrh, I., Diem, A. & Schröttner, H., 2019, Proceedings-14th Multinational Congress on Microscopy, Belgrad-Serbia, Sept. 15-20 2019. p. 37-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calcite twinning lammelae stress analysis using OIM (EBSD) data

Rez, J., Rostislav, M., Mitsche, S. & Pölt, P., 2005, In : Geological research in Moravia and Silesia. 12, p. 111-114

Research output: Contribution to journalArticleResearch

Channeling contrast by Focused Ion Beam and EBSD - two complementary techniques

Schmied, M. & Mitsche, S., 2004.

Research output: Contribution to conferencePosterResearch

Channeling contrast by Focused Ion Beam and EBSD - two complementary techniques

Schmied, M. & Mitsche, S., 2004, 13th European Microscopy Congress. ., p. 159-160

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of Ni-nanostructures in porous silicon by SEM and TEM - more problems than results

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2013.

Research output: Contribution to conferencePosterResearch

Combined EDS and WDS analysis of thin specimens with high spatial and energy resolution in the scanning electron microscope

Mitsche, S. & Pölt, P., 2014, Microscopy for Global Challenges. ., p. IT-4-P3166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combined Orientation and Phase Contrast Imaging of Precipitates in 9-12% Cr Steels

Sonderegger, B., Mitsche, S. & Cerjak, H-H., 26 Sep 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014.

Research output: Contribution to conferencePosterResearch

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014, p. MS-4-P-3413.

Research output: Contribution to conferenceAbstractResearchpeer-review

Controlling the film growth of oligo-phenylenes on gold by surface structure and surface modifications

Winkler, A., Müllegger, S., Mitsche, S. & Pölt, P., 24 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CRACK BEHAVIOUR OF THE NICKEL BASED ALLOY 80A DURING HOT FOMRING

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

Research output: Contribution to conferencePosterResearch

Crack behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007, Modern developments and applications in Microbeam Analysis. ., p. 287-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Critical issues with creep-exposed ferritic-martensitic welded joints for thermal power plants

Mayr, P., Schlacher, C. & Mitsche, S., 2011, International Conference of the IIW. ., p. 417-425

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Crystallization in High Iron Containing Silicate Glasses - Electron Microscopy Investigation

Völksch, G., Harizanova, R., Rüssel, C., Mitsche, S. & Pölt, P., 2004, In : Glass science and technology. 77C, p. 438-441

Research output: Contribution to journalArticleResearchpeer-review

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar electron beam welds of nickel base alloy A625 with a 9% Cr-steel for high temperature applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 1 May 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

DualBeam FIB application of 3D EDXS for superalloy δ-phase characterization

Wagner, J., Schaffer, M., Schröttner, H., Mitsche, S., Letofsky-Papst, I., Stotter, C. & Sommitsch, C., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 687-688 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic recrystallization of Ni-base alloys - Experimental results and comparisons with simulations

Pölt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering / A. 420, p. 306-314

Research output: Contribution to journalArticleResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Schmiedetechnik. Leoben: Lehrstuhl für Umformtechnik, p. 113-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD Analysis of the recrystallization behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C. & Pölt, P., 2006, In : Practical metallography = Praktische Metallographie. Sonderheft, 38, p. 43-50

Research output: Contribution to journalArticleResearchpeer-review

EBSD-and the recrystallisation of Ni-base alloy

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

EBSD - and the recrystallisation of Ni-base alloys

Pölt, P., Mitsche, S., Somitsch, C. & Walter, M., 2004, 13th European Microscopy Congress. ., p. 695-696 (Proceeding Vol.2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD – and the recrystallisation of Ni-base-alloys

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004, Proceedings of the 13th European Microscopy Congress. Liège: Belgian Soc. for Microscopy, p. 695-696

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - Contamination, Calibration and Specimen Damage

Pölt, P. & Mitsche, S., 2003, EMAS 2003, 8th European Workshop on Modern Developments and Applications in Microbeam Analysis, Spain, Book of Abstracts. ., p. 331-331

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD Investigations of High Iron Oxide containing Glass Ceramics

Völksch, G., Harizanova, R., Mitsche, S., Pölt, P. & Rüssel, C., 2005, European Microbeam Analysis Society EMAS 2005. ., p. 282-282

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch