Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

2010

Organic Multilayer Photodiode: Interface Roughness and Electron Density Profile in a Stacked Device Structure

Neuhold, A., Fladischer, S., Mitsche, S., Moser, A., Flesch, H-G., Novak, J., Kraker, E., Smilgies, D. M., Haase, A., Grogger, W. & Resel, R., 2010.

Research output: Contribution to conferencePosterResearch

Organic Multylayer Photodiode: Interface Roughness and Electron Density Profile in a Stacked Device Structure

Neuhold, A., Fladischer, S., Mitsche, S., Matsko, N., Flesch, H-G., Moser, A., Novak, J., Kraker, E., Haase, A., Grogger, W. & Resel, R., 2010, International Conference on Organic Electronics. ., p. 237-237

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 2010, In : Advanced Materials Research. 89-91, p. 509-514

Research output: Contribution to journalArticleResearchpeer-review

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2010, In : Key engineering materials. 424, p. 27-34

Research output: Contribution to journalArticleResearchpeer-review

Structural and morphological characterization of an organic multilayer photodiode with X-ray scattering techniques, electron microscopy and AFM

Neuhold, A., Fladischer, S., Mitsche, S., Moser, A., Flesch, H-G., Novak, J., Kraker, E., Haase, A., Smilgies, D. M., Grogger, W. & Resel, R., 2010.

Research output: Contribution to conferencePosterResearch

Structural and morphological characterization of an organic multilayer photodiode with X-ray scattering techniques, electron microscopy and AFM

Neuhold, A., Fladischer, S., Mitsche, S., Matsko, N., Flesch, H-G., Moser, A., Smilgies, D. M., Kraker, E., Grogger, W. & Resel, R., 2010.

Research output: Contribution to conferencePosterResearch

2011

Assessment of dynamic softening mechanisms in Allvac® 718PlusTM by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, In : Materials science and engineering / A. 528, p. 3754-3760

Research output: Contribution to journalArticleResearchpeer-review

Critical issues with creep-exposed ferritic-martensitic welded joints for thermal power plants

Mayr, P., Schlacher, C. & Mitsche, S., 2011, International Conference of the IIW. ., p. 417-425

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on the softening processes in Allvac 718Plus

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of Temperature and strain rate on the softening process in Allvac718PLUS

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, International Conference on Processing & Manufacturing of Advanced Materials. ., p. 543-543

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Enzinger, N., Schröttner, H. & Mitsche, S., 31 Jul 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Orientation contrast images of different ceramic materials with the SEM

Reichmann, A., Mitsche, S., Reingruber, H., Pölt, P., Reichmann, K., Simic, S. & Zankel, A., 15 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Structure and morphology of an organic/inorganic multilayer stack: An x-ray reflectivity study

Neuhold, A., Fladischer, S., Mitsche, S., Flesch, H-G., Moser, A., Novak, J., Smilgies, D. M., Kraker, E., Lamprecht, B., Haase, A., Grogger, W. & Resel, R., 2011, In : Journal of Applied Physics. 110, 114911, p. 1-7

Research output: Contribution to journalArticleResearchpeer-review

The impact of weld metal creep strength on the overall creep strength of 9%Cr steel weldments

Mayr, P., Mitsche, S., Cerjak, H-H. & Allen, S. M., 2011, In : Journal of engineering materials and technology. 133, 2, 021011.

Research output: Contribution to journalArticleResearchpeer-review

2012

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain Boundaries: Still Active in Electronic Ceramics

Reichmann, K., Kirstein, K. & Mitsche, S., 17 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on dynamic softening processes in AllvacR 718PlusTM

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2012, In : Materials Science Forum. 706-709, p. 2440-2445

Research output: Contribution to journalArticleResearchpeer-review

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Schröttner, H., Mitsche, S. & Enzinger, N., 2012, In : Advanced Materials Research. 409, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

INVESTIGATION OF MICRO-CRACK PROPAGATION IN THE NICKEL BASED ALLOY 80A DURING HOT FORMING BY 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Investigation of Micro-Crack propagation tn the Nickel based alloy 80A during hot forming by 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012, Electron Probe Microanalysis of Materials Today. ., p. 358-358

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Porous silicon and Ni-nanostructures , a very versatile, but still poorly characterized

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Porous silicon and Ni-nanostructures , a very versatile, but still poorly characterized

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2012, Physical Sciences: Applications. ., p. 489-490

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Raman Analysis of CaSO4-based Materials

Chernev, B. S., Wagner, J., Mitsche, S. & Wilhelm, P., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File
2013

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis based on WDS: applications, problems, solutions

Pölt, P. & Mitsche, S., 4 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterization of Ni-nanostructures in porous silicon by SEM and TEM - more problems than results

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2013.

Research output: Contribution to conferencePosterResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N., Mitsche, S. & Sommitsch, C., 2013, In : Welding in the world. 57, 6, p. 895-902

Research output: Contribution to journalArticleResearchpeer-review

Geopolymerization of coal fly ash in the presence of electric arc furnace dust

Nikolic, I., Crossed, D. S., Belcic, D., Zejak, R., Karanovic, L., Mitsche, S. & Radmilovic, V., 2013, In : Minerals engineering. 49, p. 24-32

Research output: Contribution to journalArticleResearchpeer-review

Hot deformation studies of a creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 3 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot deformation studies of creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 2013, Magnesium; Aluminium; Titanium Science and Technology. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

In situ mechanical polarization of polycristalline BaTiO3 in the ESEM with subsequent EBSD investigations

Reichmann, A., Reichmann, K., Mitsche, S., Zankel, A. & Pölt, P., 2013, Instrumentation and Methods; Materials Science. ., p. 377-378

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, In : Materials and corrosion. 64, 4, p. 290-299

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evolution of AA6082 with small aluminides under hot torsion and friction stir processing

Poletti, M. C., Krumphals, F., Mitsche, S. & Gao, Z., 2013, In : Materials Science Forum. 753, p. 263-266

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evolution of AA6082 with small aluminides under hot torsion and friction stir processing

Poletti, M. C., Krumphals, F., Gao, Z., Enzinger, N. & Mitsche, S., 15 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File
2014

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

Combined EDS and WDS analysis of thin specimens with high spatial and energy resolution in the scanning electron microscope

Mitsche, S. & Pölt, P., 2014, Microscopy for Global Challenges. ., p. IT-4-P3166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014.

Research output: Contribution to conferencePosterResearch

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014, p. MS-4-P-3413.

Research output: Contribution to conferenceAbstractResearchpeer-review

In situ mechanical compression of polycrystalline BaTiO3 in the ESEM

Reichmann, A., Mitsche, S., Zankel, A., Pölt, P. & Reichmann, K., 2014, In : Journal of the European Ceramic Society. 34, p. 2211-2215

Research output: Contribution to journalArticleResearchpeer-review

Investigation of the domain switching in the bulk and on the surface of BaTiO3

Reichmann, A., Mitsche, S., Zankel, A., Pölt, P. & Reichmann, K., 2014.

Research output: Contribution to conferencePosterResearch

Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

Kuduzovic, A., Poletti, M. C., Sommitsch, C., Domankova, M., Mitsche, S. & Kienreich, R., 2014, In : Materials science and engineering / A. 590, p. 66-73

Research output: Contribution to journalArticleResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-Scale-Analysis of Modern Aluminium-Alloys

Schröttner, H., Panzirsch, B., Albu, M., Mitsche, S., Mertschnigg, S., Gspan, C., Rattenberger, J., Wagner, J. & Hofer, F., 2014, p. MS-4-P-2525.

Research output: Contribution to conferenceAbstractResearchpeer-review